Black screen after linux boot messages, no web interface

[welcometheend]

After failing to get CORE to see that my server does indeed support virtualization, I figured id just do Docker containers the easy way with SCALE.

However after both upgrading and clean installs, it simply does not work. Monitor gets signal but is entirely blank, no flashing cursor, nothing. No IP address to the machine either. Machine is a little older, core 2 quad, 8gb ram, BIOS only no uefi. Install goes fine from usb, but just after is broken.

 

[WI_Hedgehog]

"Absolutely must virtualize FreeNAS!" ... a guide to not completely losing your data.

[---- 2018/02/27: This is still as relevant as ever. As PCIe-Passthru has matured, fewer problems are reported. I've updated some specific things known to be problematic ----] [---- 2014/12/24: Note, there is another post discussing how to deploy a small FreeNAS VM instance for basic file...

www.truenas.com

Forum Rules

Welcome to the TrueNAS Community! Updated 11/28/2023 First and foremost I want to thank you for joining the TrueNAS community! My name is JoshDW19 and I'm the Community Manager here at TrueNAS. The TrueNAS Community is a friendly place to discuss open source software, technology, and products...

www.truenas.com

(namely, post your hardware setup)

 

[welcometheend]

Show : Dell Optiplex 755

Q9400 Core 2 Quad
8gb ram
HPE Smart Array P410

I'll try Proxmox to virtualize truenas

 

[welcometheend]

Looks like that won't work. Installer complains about missing VT/SVM despite it being enabled in BIOS. So I guess I'll have to stick with CORE until I can get a new machine or fix SCALE.

 

[welcometheend]

Bump

 

[NugentS]

It won't work because you don't have any hardware to run the software on