devnullius
Patron
- Joined
- Dec 9, 2015
- Messages
- 289
When I install Bacula, I get these console messages:
(thanks https://forums.freenas.org/index.php?threads/show-logging-console-via-ssh.38419/ for showing me how to copy paste console messages with FreeNAS 9.10)
When I then go to Plugins - Installed and try to enable bacula, nothing happens (no new console messages either). The switch just remains on 'off' (using Chrome). Other plugins have no problems being turned on :)
According to https://forums.freenas.org/index.ph...-3-unable-to-start-plugins.26034/#post-166233 this is caused by mis-configured firewall - which we aren't using on FreeNAS (I learned yesterday).
PS: Also, when I go to Plugins - Installed, it takes a minute or so before the list is loaded... Load of my hardware is idle, so I don't get it. I have about 6 plugins installed...
Any ideas? I don't think I'm messing this up, this time ;-)
Peace!
Devnullius
Code:
Mar 28 10:07:58 bigcube Freed UMA keg (tcpcb) was not empty (18 items). Lost 6 pages of memory. Mar 28 10:07:58 bigcube hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required Mar 28 10:07:58 bigcube hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required Mar 28 10:08:01 bigcube manage.py: [freeadmin.navtree:567] Couldn't retrieve http://192.168.1.50/plugins/bacula-sd/7/_s/treemenu: timed out Mar 28 10:08:04 bigcube notifier: Performing sanity check on nginx configuration: Mar 28 10:08:04 bigcube notifier: nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok Mar 28 10:08:04 bigcube notifier: nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful Mar 28 10:08:40 bigcube manage.py: [plugins.utils:91] Couldn't retrieve http://192.168.1.50/plugins/bacula-sd/7/_s/status: No JSON object could be decoded Mar 28 10:08:45 bigcube manage.py: [freeadmin.navtree:567] Couldn't retrieve http://192.168.1.50/plugins/bacula-sd/7/_s/treemenu: timed out Mar 28 10:08:45 bigcube manage.py: [freeadmin.navtree:621] An error occurred while unserializing from http://192.168.1.50/plugins/bacula-sd/9/_s/treemenu: No JSON object could be decoded
(thanks https://forums.freenas.org/index.php?threads/show-logging-console-via-ssh.38419/ for showing me how to copy paste console messages with FreeNAS 9.10)
When I then go to Plugins - Installed and try to enable bacula, nothing happens (no new console messages either). The switch just remains on 'off' (using Chrome). Other plugins have no problems being turned on :)
According to https://forums.freenas.org/index.ph...-3-unable-to-start-plugins.26034/#post-166233 this is caused by mis-configured firewall - which we aren't using on FreeNAS (I learned yesterday).
PS: Also, when I go to Plugins - Installed, it takes a minute or so before the list is loaded... Load of my hardware is idle, so I don't get it. I have about 6 plugins installed...
Any ideas? I don't think I'm messing this up, this time ;-)
Peace!
Devnullius
Last edited: