THANKS all for the suggestions. I solved my issue by creating a 3 x 2(disk) mirror and now I am able to edit and scrub the footage smoothly! Performance went up by ALOT!
So just recently built a new TrueNAS core rig with the following spec:
CPU - EPYC 7402P – 24 core
RAM - 256GB DDR4 ECC RAM
Motherboard - ASROCK EPYCD8
NIC: Broadcom 10g RJ45
Main Array:
6X10TB WD Red NAS Pro in Raid Z2
The drives are mounted in windows 11pro as SMB
I am trying to edit my 8K RAW footage directly from the server, and the video bitrate is 1700 Mbps (250MB/s roughly). I did some file copy test and was able to achieve a minimum of 400MB/s write and 10000 MB/s read speed on a large 75GB video file. Yet the playback is choppy in Davinci Resolve… Edit works file and smooth when using local NVME drives.
Is my write speed reasonable for a server of this spec? Anything else I can optimize?
So just recently built a new TrueNAS core rig with the following spec:
CPU - EPYC 7402P – 24 core
RAM - 256GB DDR4 ECC RAM
Motherboard - ASROCK EPYCD8
NIC: Broadcom 10g RJ45
Main Array:
6X10TB WD Red NAS Pro in Raid Z2
The drives are mounted in windows 11pro as SMB
I am trying to edit my 8K RAW footage directly from the server, and the video bitrate is 1700 Mbps (250MB/s roughly). I did some file copy test and was able to achieve a minimum of 400MB/s write and 10000 MB/s read speed on a large 75GB video file. Yet the playback is choppy in Davinci Resolve… Edit works file and smooth when using local NVME drives.
Is my write speed reasonable for a server of this spec? Anything else I can optimize?
Last edited: