All drives go in standby except one

Pas05

Dabbler
Joined
Aug 11, 2019
Messages
12
Hello,

i have a zfs pool consisting of 4 drives which are a striped mirror.
3 of that 4 drives go in standby mode as configured in the GUI but 1 drive doesnt. All 4 drives are configured the same way.
I checked via "camcontrol powermode /dev/ada1" and it returns "Active or idle mode". For the other 3 drives it shows "standby" as expected.
I also checked the drive via "smartctl --get=apm /dev/ada1" but this returns the same (1) as for all the other drives.

Manually putting the drive to sleep via camcontrol standby /dev/ada1 works just fine.

Does this mean that this is an hardware issue or is there anything else i can do to fix this?

Thanks in advance
 
Top