Hattan.hala
Cadet
- Joined
- Aug 2, 2021
- Messages
- 1
Hello,
I Just set up a new Truenas server.
I prefer to have 2 interfaces in my NAS device so I added a new NIC since the motherboard I have only came with 1.
the setup went fine, everything is working, however, Truenas didn't recognize my new network card.
After doing some testing on windows, I found that the new NIC is working just fine and windows can recognize the new interface.
Unfortunately, only Truenas was not able to see the new interface.
I've tried to run various commands, the system doesn't see it.
I tried moving it from one port to another (I have 2) but the results remain the same.
Can someone suggest another course of action or commands I can utilize to troubleshoot the problem?
thanks.
I am using:
TrueNAS-12.0-U4.1
Motherboard: GIGABYTE GA-Z87X-HD3 LGA1150
CPU: Intel I7-4770
RAM: 32 GB DDR3
HD: (1) 120GB SSD Kingstone OS Drive & (3) WDRed 2TB @ Raid Z
HD Controllers: 6 x SATA 6Gb/s
Network Cards: 1 x Gigabit LAN Controller (On-board) & added TP-Link 10GB PCIe Network Card (TX401)-PCIe (the one is not recognized)
I Just set up a new Truenas server.
I prefer to have 2 interfaces in my NAS device so I added a new NIC since the motherboard I have only came with 1.
the setup went fine, everything is working, however, Truenas didn't recognize my new network card.
After doing some testing on windows, I found that the new NIC is working just fine and windows can recognize the new interface.
Unfortunately, only Truenas was not able to see the new interface.
I've tried to run various commands, the system doesn't see it.
I tried moving it from one port to another (I have 2) but the results remain the same.
Can someone suggest another course of action or commands I can utilize to troubleshoot the problem?
thanks.
I am using:
TrueNAS-12.0-U4.1
Motherboard: GIGABYTE GA-Z87X-HD3 LGA1150
CPU: Intel I7-4770
RAM: 32 GB DDR3
HD: (1) 120GB SSD Kingstone OS Drive & (3) WDRed 2TB @ Raid Z
HD Controllers: 6 x SATA 6Gb/s
Network Cards: 1 x Gigabit LAN Controller (On-board) & added TP-Link 10GB PCIe Network Card (TX401)-PCIe (the one is not recognized)