hi, i'm new on the forum and i'm on the first experience on server grade electronics. i've a intel sr2600urlxr with 2x xeon5670 96bg of ddr3 ram 1333mhz.
it has an integrated sas/sata raid controlled SROMBSASMP2 (firmware version 1.40-232-1007) from intel and an active backplane.
when i started the installation of freenas the raid causes alot of problem (although i was installing the os from usb to usb with no disk installed ....why it does that? usb now are under raid?) so i went into the Bios and disable the SAS raid controller. reboot and all go ok for the installation but the backplane started beeping like crazy. single beep infinite time. turns out that if the SAS is disable the backplane beeps...... so i'm here to ask if someone know or how to disable the beeping or how to disable the functionality of the raid controller inside the Intel Raid BIOS Console.
thanks in advance
it has an integrated sas/sata raid controlled SROMBSASMP2 (firmware version 1.40-232-1007) from intel and an active backplane.
when i started the installation of freenas the raid causes alot of problem (although i was installing the os from usb to usb with no disk installed ....why it does that? usb now are under raid?) so i went into the Bios and disable the SAS raid controller. reboot and all go ok for the installation but the backplane started beeping like crazy. single beep infinite time. turns out that if the SAS is disable the backplane beeps...... so i'm here to ask if someone know or how to disable the beeping or how to disable the functionality of the raid controller inside the Intel Raid BIOS Console.
thanks in advance