9.3 Upgrade - Unhandled Exception

[kc10kevin]

Hi all,

I have been trying to upgrade my box from 9.2.3.1 to 9.3. No matter what I do, I get an "unhandled exception" on the web browser when I try to access the WebGUI. I've tried:

- Upgrade from GUI
- Upgrade from ISO
- Upgrade from ISO (Fresh install)
- Different web browsers
- Cleared web browser settings
- Tried all different 9.3 versions (from current to stable to nightlies)

Console is up and running and shows the correct IP address: http://192.168.1.174

Any suggestions?

Thanks in advance.

Kevin

 

[cyberjock]

What's your hardware?

 

[kc10kevin]

Sorry...Forgot to add

SUPERMICRO MBD-X9SCM-F-O LGA 1155 Intel C204 Micro ATX Intel Xeon E3 Server Motherboard
4 x Kingston 8GB 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1600 Server Memory w/TS Model KVR16E11/8
Intel Xeon E3-1230 V2 Ivy Bridge 3.3GHz (3.7GHz Turbo) LGA 1155 69W Server Processor BX80637E31230V2
2 x IBM M1015 cards

 

[kc10kevin]

4 x Western Digital Red NAS Hard Drive WD30EFRX 3TB IntelliPower 64MB Cache SATA 6.0Gb/s 3.5" NAS Hard Drive

 

[kc10kevin]

More info if needed. Getting a pager read error fault.

 

[kc10kevin]

I guess the 33rd try is the charm...Didn't do anything different, but now its up and running without issues.

Decided to do a fresh install again from the most recent STABLE version. Worked this time for some reason. Uploaded the config file and its purring like a kitten.

 

[RiBeneke]

I am having the same error in Firefox after typing IP address : Unhandled exception thrown by application.
This has happened randomly since upgrading FreeNAS 9.2.1.6 to 9.3 this weekend, each time after a cold restart of the system.
Both times the problem was solved by rebooting FreeNAS.
HP ML310 server, Xeon E3-1220, 16 GB ECC RAM, 3 x 2 TB WD Red, 16 GB Toshiba USB system disk.
The only new hardware is the USB disk.

 

[ovizii]

Did anyone figure this one out?