10GbE NIC QLE3242 Compatibility

[HighMans]

Hello! I'm on the latest version of FreeNAS (11.2) and am having issues configuring and setting up a 10GbE NIC with the QLE3242 chipset. I'm getting the following errors below:

Code:

Dec 13 11:45:27 freenas ql1: qla_hw_send: (nsegs[1, 155, 0x2<CSUM_IP_UDP>] > Q8_TX_MAX_SEGMENTS)
Dec 13 11:45:27 freenas ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x9b dump start
Dec 13 11:45:27 freenas ql1: 0x00000000: 01 00 5e 00 00 fb 24 be 05 ef 32 44 08 00 45 00
Dec 13 11:45:27 freenas ql1: 0x00000010: 00 8d 27 9b 00 00 ff 11 00 b8 ac 10 06 01 e0 00
Dec 13 11:45:27 freenas ql1: 0x00000020: 00 fb 14 e9 14 e9 00 79 93 97 00 00 84 00 00 00
Dec 13 11:45:27 freenas ql1: 0x00000030: 00 02 00 00 00 02 01 31 01 36 02 31 36 03 31 37
Dec 13 11:45:27 freenas ql1: 0x00000040: 32 07 69 6e 2d 61 64 64 72 04 61 72 70 61 00 00
Dec 13 11:45:27 freenas ql1: 0x00000050: 0c 80 01 00 00 00 78 00 0f 07 66 72 65 65 6e 61
Dec 13 11:45:27 freenas ql1: 0x00000060: 73 05 6c 6f 63 61 6c 00 c0 2f 00 01 80 01 00 00
Dec 13 11:45:27 freenas ql1: 0x00000070: 00 78 00 04 ac 10 06 01 c0 0c 00 2f 80 01 00 00
Dec 13 11:45:27 freenas ql1: 0x00000080: 00 78 00 06 c0 0c 00 02 00 08 c0 2f 00 2f 80 01
Dec 13 11:45:27 freenas ql1: 0x00000090: 00 00 00 78 00 05 c0 2f 00 01 40

Any help would be appreciated -- thank you!

 

[Chris Moore]

Hello! I'm on the latest version of FreeNAS (11.2) and am having issues configuring and setting up a 10GbE NIC with the QLE3242 chipset. I'm getting the following errors below:

Code:

Dec 13 11:45:27 freenas ql1: qla_hw_send: (nsegs[1, 155, 0x2<CSUM_IP_UDP>] > Q8_TX_MAX_SEGMENTS)
Dec 13 11:45:27 freenas ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x9b dump start
Dec 13 11:45:27 freenas ql1: 0x00000000: 01 00 5e 00 00 fb 24 be 05 ef 32 44 08 00 45 00
Dec 13 11:45:27 freenas ql1: 0x00000010: 00 8d 27 9b 00 00 ff 11 00 b8 ac 10 06 01 e0 00
Dec 13 11:45:27 freenas ql1: 0x00000020: 00 fb 14 e9 14 e9 00 79 93 97 00 00 84 00 00 00
Dec 13 11:45:27 freenas ql1: 0x00000030: 00 02 00 00 00 02 01 31 01 36 02 31 36 03 31 37
Dec 13 11:45:27 freenas ql1: 0x00000040: 32 07 69 6e 2d 61 64 64 72 04 61 72 70 61 00 00
Dec 13 11:45:27 freenas ql1: 0x00000050: 0c 80 01 00 00 00 78 00 0f 07 66 72 65 65 6e 61
Dec 13 11:45:27 freenas ql1: 0x00000060: 73 05 6c 6f 63 61 6c 00 c0 2f 00 01 80 01 00 00
Dec 13 11:45:27 freenas ql1: 0x00000070: 00 78 00 04 ac 10 06 01 c0 0c 00 2f 80 01 00 00
Dec 13 11:45:27 freenas ql1: 0x00000080: 00 78 00 06 c0 0c 00 02 00 08 c0 2f 00 2f 80 01
Dec 13 11:45:27 freenas ql1: 0x00000090: 00 00 00 78 00 05 c0 2f 00 01 40

Any help would be appreciated -- thank you!

Did this ever work for you? I don't see any listing on the qlogic.com site that indicates BSD Unix compatibility.
http://driverdownloads.qlogic.com/Q...t.aspx?ProductCategory=325&Product=1159&Os=26

Did you look at the hardware guide:

Hardware Recommendations Guide Rev 1e) 2017-05-06
https://forums.freenas.org/index.php?resources/hardware-recommendations-guide.12/

10 Gig Networking Primer
https://forums.freenas.org/index.php?resources/10-gig-networking-primer.42/