DigitalMinimalist
Contributor
- Joined
- Jul 24, 2022
- Messages
- 162
Dear all,
today I received my 2x 10GBE Intel X710-DA2 NICs and quickly installed them in my TrueNAS Scale Server and my Windows 10 workstation and connected both with a DAC / Twinax cable.
The NICs are visible in TrueNAS and also Windows 10 and I want to establish a 10GBE Peer to Peer connection. I read several forum posts, but I'm stuck.
Green lights are lid up at the NICs and Windows recognizes an "unidentified network" with 10GBE
I currently set-up the NICs like that:
Windows:
IP = 10.10.10.2
Gateway = 255.255.255.252
Jumbo Packets enabled
TrueNAS
I tried multiple options, e.g. static route, but none worked (had to reset the whole config, because I messed up the network config)
Pinging TrueNAS from Windows fails...
Any clues how to establish the peerto peer connection?
today I received my 2x 10GBE Intel X710-DA2 NICs and quickly installed them in my TrueNAS Scale Server and my Windows 10 workstation and connected both with a DAC / Twinax cable.
The NICs are visible in TrueNAS and also Windows 10 and I want to establish a 10GBE Peer to Peer connection. I read several forum posts, but I'm stuck.
Green lights are lid up at the NICs and Windows recognizes an "unidentified network" with 10GBE
I currently set-up the NICs like that:
Windows:
IP = 10.10.10.2
Gateway = 255.255.255.252
Jumbo Packets enabled
TrueNAS
I tried multiple options, e.g. static route, but none worked (had to reset the whole config, because I messed up the network config)
Pinging TrueNAS from Windows fails...
Any clues how to establish the peerto peer connection?