Ive got a couple of system crashes that left no logs or kernel messages :S so Im trying to see what it might be.
Im using a LSI 9300-8i with 6 SSDs.
a) Do I need to do any BIOS updates or it seems ok to you?
b) On the ASUS bios (11th gen intel) the LSI card seems to be in Legacy mode (from the BIOS -> Advance menu). Is this the recommended?
c) I have a 120mm Noctua fan very very close to the LSI (half an inch / 1cm). Low RPMs but I think its ok. No?
Thanks
Im using a LSI 9300-8i with 6 SSDs.
a) Do I need to do any BIOS updates or it seems ok to you?
root@truenas[~]# sas3flash -list
Avago Technologies SAS3 Flash Utility
Version 16.00.00.00 (2017.05.02)
Copyright 2008-2017 Avago Technologies. All rights reserved.
Adapter Selected is a Avago SAS: SAS3008(C0)
Controller Number : 0
Controller : SAS3008(C0)
PCI Address : 00:00:10:00
SAS Address : 500605b-0-0915-a7d2
NVDATA Version (Default) : 0e.01.00.07
NVDATA Version (Persistent) : 0e.01.00.07
Firmware Product ID : 0x2221 (IT)
Firmware Version : 16.00.01.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9300-8i
BIOS Version : 08.37.00.00
UEFI BSD Version : 18.00.00.00
FCODE Version : N/A
Board Name : SAS9300-8i
Board Assembly : H3-25461-02H
Board Tracer Number : XW64122ED2
Finished Processing Commands Successfully.
Exiting SAS3Flash.
b) On the ASUS bios (11th gen intel) the LSI card seems to be in Legacy mode (from the BIOS -> Advance menu). Is this the recommended?
c) I have a 120mm Noctua fan very very close to the LSI (half an inch / 1cm). Low RPMs but I think its ok. No?
Thanks