Visseroth
Guru
- Joined
- Nov 4, 2011
- Messages
- 546
OK, so I've been struggling with this server for a while but I can't afford to just toss it after putting money into it already.
Prior problems include random reboots when transferring data at 80+% saturation on the on-board 1Gb NICs,
OEM Critical Interrupt Software NMI @ BUS:0 /Dev:1 /Func:0 - Asserted
The system is a X8DTH motherboard, 48GB of RAM. 5 LSI 9811-8i controllers and a Intel EXPX9501AFXSR 10GbE XF SR FIBER CHANNEL SERVER ADAPTER CARD. Upon startup the NIC was recognized, I configured it's IP but there was no link on the switch. After a while the console started becoming laggy then the NIC disappeared. I sent a graceful shutdown and it took forever to shutdown. When it did start to go down I saw that IX0 link kept going up and down before it shutdown.
I'm currently working on installing the NIC in my desktop to confirm that it is working correctly. But does anyone have any ideas on WTF is going on?
Prior problems include random reboots when transferring data at 80+% saturation on the on-board 1Gb NICs,
OEM Critical Interrupt Software NMI @ BUS:0 /Dev:1 /Func:0 - Asserted
The system is a X8DTH motherboard, 48GB of RAM. 5 LSI 9811-8i controllers and a Intel EXPX9501AFXSR 10GbE XF SR FIBER CHANNEL SERVER ADAPTER CARD. Upon startup the NIC was recognized, I configured it's IP but there was no link on the switch. After a while the console started becoming laggy then the NIC disappeared. I sent a graceful shutdown and it took forever to shutdown. When it did start to go down I saw that IX0 link kept going up and down before it shutdown.
I'm currently working on installing the NIC in my desktop to confirm that it is working correctly. But does anyone have any ideas on WTF is going on?