Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #0 r321665+9902d126c39(freenas/11.1-stable): Tue Aug 21 12:24:37 EDT 2018
    root@nemesis.tn.ixsystems.com:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
CPU: Intel(R) Xeon(R) CPU           E5640  @ 2.67GHz (2660.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 52344913920 (49920 MB)
avail memory = 49984376832 (47668 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic1: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 1330028462 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 36 at device 0.0 on pci1
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: b8:ac:6f:91:dd:83
bce0: 
<5>bce0: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.8)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 48 at device 0.1 on pci1
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: b8:ac:6f:91:dd:85
bce1: 
<5>bce1: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.8)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 32 at device 0.0 on pci2
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: b8:ac:6f:91:dd:87
bce2: 
<5>bce2: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.8)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 42 at device 0.1 on pci2
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: b8:ac:6f:91:dd:89
bce3: 
<5>bce3: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.8)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps0: <Avago Technologies (LSI) SAS2008> port 0xfc00-0xfcff mem 0xdf2b0000-0xdf2bffff,0xdf2c0000-0xdf2fffff irq 33 at device 0.0 on pci3
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <network, ethernet> at device 0.0 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <network, ethernet> at device 0.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xd5800000-0xd5ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci8
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ichwd0: <Intel ICH9 watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcbfff,0xd5000-0xd5fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est0 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est1 attach returned 6
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est2 attach returned 6
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est3 attach returned 6
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est4 attach returned 6
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est5 attach returned 6
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est6 attach returned 6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est7 attach returned 6
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est8 attach returned 6
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est9 attach returned 6
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est10 attach returned 6
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est11 attach returned 6
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est12 attach returned 6
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est13 attach returned 6
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est14 attach returned 6
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 15
device_attach: est15 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen5.1: <Intel EHCI root HUB> at usbus5
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
ugen2.2: <USB Disk 2.0> at usbus2
umass0 on uhub5
umass0: <USB Disk 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:4:0: Attached to scbus4
ugen3.2: <Avocent USB Composite Device-0> at usbus3
ukbd0 on uhub4
ukbd0: <Keyboard> on usbus3
kbd2 at ukbd0
ugen2.3: <vendor 0x0424 product 0x2514> at usbus2
uhub6 on uhub5
uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus2
uhub6: MTT enabled
uhub6: 3 ports with 3 removable, self powered
ugen2.4: <General USB Flash Disk> at usbus2
umass1 on uhub6
umass1: <General USB Flash Disk, class 0/0, rev 2.00/1.00, addr 4> on usbus2
umass1:  SCSI over Bulk-Only; quirks = 0xc101
umass1:5:1: Attached to scbus5
random: unblocking device.
da7 at umass-sim1 bus 1 scbus5 target 0 lun 0
da5 at mps0 bus 0 scbus0 target 6 lun 0
da6 at umass-sim0 bus 0 scbus4 target 0 lun 0
da7: <General USB Flash Disk 1.00> Removable Direct Access SCSI-2 device
da7: Serial Number 051125000000010A
da7: 40.000MB/s transfers
da7: 7651MB (15669248 512 byte sectors)
da7: quirks=0x2<NO_6_BYTE>
da4 at mps0 bus 0 scbus0 target 5 lun 0
da5: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da6: <VendorCo ProductCode 2.00> Removable Direct Access SPC-2 SCSI device
da6: Serial Number 9207052936709722293
da6: 40.000MB/s transfers
da6: 7800MB (15974400 512 byte sectors)
da6: quirks=0x2<NO_6_BYTE>
da3 at mps0 bus 0 scbus0 target 4 lun 0
da3: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number YHKZ8WDD
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number YHKZMN3D
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
da5: Serial Number YHKUD0HA
da4: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number YHKZGMBK
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 2 lun 0
da2: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number YHKZE2BD
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors)
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <HITACHI HUS723030ALS640 M2D4> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number YHKZE1WD
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
cd0 at ata2 bus 0 scbus1 target 0 lun 0
cd0: <TEAC DVD-ROM DV-28SW R.2A> Removable CD-ROM SCSI device
cd0: Serial Number 10072700150147
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
mlx4_core0: <mlx4_core> mem 0xdf400000-0xdf4fffff,0xd4800000-0xd4ffffff irq 38 at device 0.0 on pci6
<6>mlx4_core: Initializing mlx4_core: Mellanox ConnectX VPI driver v2.1.6 (Aug 21 2018)
<6>
<6>mlx4_en mlx4_core0: Activating port:1
mlxen0: Ethernet address: 00:02:c9:50:6f:ce
<4>mlx4_en: mlx4_core0: Port 1: Using 16 TX rings
<5>mlxen0: link state changed to DOWN
<4>mlx4_en: mlx4_core0: Port 1: Using 16 RX rings
<4>mlx4_en: mlxen0: Using 16 TX rings
<4>mlx4_en: mlxen0: Using 16 RX rings
<4>mlx4_en: mlxen0: Initializing port
mlx4_core1: <mlx4_core> mem 0xdf600000-0xdf6fffff,0xd5000000-0xd57fffff irq 40 at device 0.0 on pci7
<6>mlx4_core: Initializing mlx4_core: Mellanox ConnectX VPI driver v2.1.6 (Aug 21 2018)
<6>
<6>mlx4_en: mlxen0: Link Down
<6>mlx4_en mlx4_core1: Activating port:1
mlxen2: Ethernet address: 00:02:c9:53:ff:04
<4>mlx4_en: mlx4_core1: Port 1: Using 16 TX rings
<5>mlxen2: link state changed to DOWN
<4>mlx4_en: mlx4_core1: Port 1: Using 16 RX rings
<4>mlx4_en: mlxen2: Using 16 TX rings
<4>mlx4_en: mlxen2: Using 16 RX rings
<4>mlx4_en: mlxen2: Initializing port
Trying to mount root from zfs:freenas-boot/ROOT/11.1-U6 []...
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
ipmi0: IPMI device rev. 0, firmware rev. 2.91, version 2.0
ipmi0: Number of channels 5
ipmi0: Attached watchdog
<118>Loading early kernel modules:
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_MIRROR: Device mirror/swap2 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device mirror/swap2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
<118>Setting hostuuid: 0e3a60af-d767-11e8-bafb-b8ac6f91dd83.
<118>Setting hostid: 0xbec8b429.
<118>Starting file system checks:
<118>Mounting local filesystems:.
<118>vfs.zfs.l2arc_headroom: 2 -> 2
<118>net.inet.tcp.mssdflt: 536 -> 1448
<118>net.inet.tcp.recvspace: 65536 -> 262144
<118>vfs.zfs.l2arc_write_boost: 8388608 -> 40000000
<118>net.inet.tcp.sendbuf_inc: 8192 -> 16384
<118>net.inet.tcp.delayed_ack: 1 -> 0
<118>vfs.zfs.zfetch.max_distance: 8388608 -> 33554432
<118>vfs.zfs.arc_max: 49111117824 -> 46332000000
<118>net.inet.tcp.sendspace: 32768 -> 262144
<118>net.inet.tcp.sendbuf_max: 2097152 -> 16777216
<118>vfs.zfs.l2arc_noprefetch: 1 -> 0
<118>vfs.zfs.l2arc_norw: 1 -> 0
<118>vfs.zfs.metaslab.lba_weighting_enabled: 1 -> 1
<118>kern.ipc.nmbclusters: 3142484 -> 3142484
<118>net.inet.tcp.recvbuf_max: 2097152 -> 16777216
<118>vfs.zfs.l2arc_write_max: 8388608 -> 10000000
<118>net.inet.tcp.recvbuf_inc: 16384 -> 524288
<118>kern.ipc.maxsockbuf: 2097152 -> 4194304
<118>Beginning ZFS volume imports
<118>
<118>	Importing 3685785913074013110
<118>
<118><118>                                                                     spa=StrgPool async request task=1                                                                     txg 2371352 open pool version 5000; software version 5000/5; uts  11.1-STABLE 1101505 amd64                                                                     spa=StrgPool async request task=32                                                                     txg 2371354 import pool version 5000; software version 5000/5; uts  11.1-STABLE 1101505 amd64
<118>ZFS volume imports complete
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.24/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>Loading kernel modules:
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
<118>Setting hostname: freenas01.epassage.local.
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: .
<5>mlxen0: link state changed to UP
<5>mlxen2: link state changed to UP
<118>Starting Network: lo0 bce0 bce1 bce2 bce3 mlxen0 mlxen2.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
<118>	ether b8:ac:6f:91:dd:83
<118>	hwaddr b8:ac:6f:91:dd:83
<118>	inet 10.44.52.222 netmask 0xffffff00 broadcast 10.44.52.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect (none)
<118>	status: no carrier
<118>bce1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
<118>	ether b8:ac:6f:91:dd:85
<118>	hwaddr b8:ac:6f:91:dd:85
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect
<118>bce2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
<118>	options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
<118>	ether b8:ac:6f:91:dd:87
<118>	hwaddr b8:ac:6f:91:dd:87
<118>	inet 192.168.6.1 netmask 0xffffff00 broadcast 192.168.6.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect (none)
<118>	status: no carrier
<118>bce3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
<118>	options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
<118>	ether b8:ac:6f:91:dd:89
<118>	hwaddr b8:ac:6f:91:dd:89
<118>	inet 192.168.5.1 netmask 0xffffff00 broadcast 192.168.5.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect (none)
<118>	status: no carrier
<118>mlxen0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
<118>	options=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	ether 00:02:c9:50:6f:ce
<118>	hwaddr 00:02:c9:50:6f:ce
<118>	inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
<118>	status: active
<118>mlxen2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
<118>	options=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	ether 00:02:c9:53:ff:04
<118>	hwaddr 00:02:c9:53:ff:04
<118>	inet 192.168.3.1 netmask 0xffffff00 broadcast 192.168.3.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
<118>	status: active
<118>Starting devd.
<118>Starting Network: bce1.
<118>bce1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
<118>	ether b8:ac:6f:91:dd:85
<118>	hwaddr b8:ac:6f:91:dd:85
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	media: Ethernet autoselect
<118>Configuring syscons: keymap.
ums0 on uhub4
ums0: <Mouse> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
bce2: Gigabit link up!
<5>bce2: link state changed to UP
bce2: Gigabit link up!
bce3: Gigabit link up!
<5>bce3: link state changed to UP
bce3: Gigabit link up!
bce0: Gigabit link up!
<5>bce0: link state changed to UP
bce0: Gigabit link up!
<118>Starting ums0 moused.
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>add net default: gateway 10.44.52.254
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Starting syslog_ng.
<118>Creating and/or trimming log files.
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlx4_core0: Port 1: Using 16 TX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlx4_core0: Port 1: Using 16 RX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen0: Using 16 TX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen0: Using 16 RX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen0: Initializing port
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlx4_core1: Port 1: Using 16 TX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlx4_core1: Port 1: Using 16 RX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen2: Using 16 TX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen2: Using 16 RX rings
<118>Nov  1 18:33:27 freenas01 kernel: mlx4_en: mlxen2: Initializing port
bce0: Gigabit link up!
<118>Starting watchdogd.
<118>Setting up system for textdumps.
<118>debug.ddb.textdump.pending: 0 -> 1
<118>debug.debugger_on_panic: 1 -> 1
<118>debug.ddb.capture.bufsize: 49152 -> 524288
<118>Starting ctld.
<118>Alarm clock
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Can't load /usr/local/etc/smb4.conf - run testparm to debug it
<118>Performing sanity check on openssh configuration.
<118>Starting openssh.
<118>Syncing disks...
WARNING: 192.168.2.100 (iqn.1998-01.com.vmware:ukesxi02-4474a5fa): no ping reply (NOP-Out) after 5 seconds; dropping connection
<118>
<118>[2K[A[2KTotal Progress: [________________________________________] 0.00%[2K[A[2KTotal Progress: [########################################] 100.00%
<118>Starting smartd_daemon.
<118>Starting pbid...
<118>Performing sanity check on nginx configuration:
<118>nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
<118>nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
<118>Starting nginx.
<118>Starting dbus.
<118>Starting mdnsd.
<118>install: mkdir : No such file or directory
<118>/etc/rc: WARNING: failed precmd routine for minio
<118>* [I|O|C] starting jails... 
<118>IOCAGE_SKIP is TRUE or an RC operation, not activating a pool.
<118>Please manually issue iocage activate POOL
<118>Starting consul_alerts.
<118>Starting consul.
<118>Starting collectd.
<118>plugin_load: plugin "aggregation" successfully loaded.
<118>plugin_load: plugin "cpu" successfully loaded.
<118>plugin_load: plugin "cputemp" successfully loaded.
<118>plugin_load: plugin "ctl" successfully loaded.
<118>plugin_load: plugin "df" successfully loaded.
<118>plugin_load: plugin "disk" successfully loaded.
<118>plugin_load: plugin "exec" successfully loaded.
<118>plugin_load: plugin "geom_stat" successfully loaded.
<118>plugin_load: plugin "interface" successfully loaded.
<118>plugin_load: plugin "load" successfully loaded.
<118>plugin_load: plugin "memory" successfully loaded.
<118>plugin_load: plugin "network" successfully loaded.
<118>plugin_load: plugin "processes" successfully loaded.
<118>plugin_load: plugin "rrdtool" successfully loaded.
<118>plugin_load: plugin "swap" successfully loaded.
<118>plugin_load: plugin "uptime" successfully loaded.
<118>Flushed all rules.
<118>Waiting up to 5 seconds for ixdiagnose to finish... 5 4 3 2 1. timed out.  Will proceed in the background.
<118>Starting zfsd.
<118>Configuring syscons: keymap blanktime.
<118>Starting cron.
<118>
<118>Thu Nov  1 18:34:21 GMT 2018
WARNING: 10.44.52.202 (iqn.1991-05.com.microsoft:uk-srvdc02.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection
WARNING: 10.44.52.203 (iqn.1991-05.com.microsoft:uk-srvdc01.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection
WARNING: 10.44.52.203 (iqn.1991-05.com.microsoft:uk-srvdc01.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection
WARNING: 10.44.52.203 (iqn.1991-05.com.microsoft:uk-srvdc01.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection
WARNING: 10.44.52.203 (iqn.1991-05.com.microsoft:uk-srvdc01.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection
WARNING: 10.44.52.203 (iqn.1991-05.com.microsoft:uk-srvdc01.epassage.local): no ping reply (NOP-Out) after 5 seconds; dropping connection


Fatal trap 12: page fault while in kernel mode
cpuid = 7; apic id = 35
fault virtual address	= 0x800018
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff804864e0
stack pointer	        = 0x28:0xfffffe0fa66f9a70
frame pointer	        = 0x28:0xfffffe0fa66f9ad0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (zio_write_intr_1)
