How many whole minutes do you want between spin checks?

NOTE ABOUT DUTY CYCLE (Fan%0 and Fan%1):
Some boards apparently report incorrect duty cycle, and can
report duty cycle for zone 1 when that zone does not exist.

Key to drive status symbols:  * spinning;  _ standby;  ? unknown                              Version 2018-01-01 

Tuesday, Feb 27 
          da0  da1  da2  da3  da4  da5  da6  da7  Tmax Tmean  ERRc CPU  FAN1  FAN2  FAN3  FAN4  FANA Fan%0 Fan%1 MODE   
15:26:55  *27  *29  *29  *30  *30  *32  *31  *32  Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
^32  30.00 -3.57  39  4125  4200  4350   ---   ---     0     0 Optimal
15:27:57  *27  *29  *29  *30  *30  *32  *31  *32  Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
^32  30.00 -3.57  40  4200  4200  4350   ---   ---     0     0 Optimal
15:29:00  *27  *29  *29  *30  *30  *32  *31  *32  Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70 rsp=0xcc): Invalid data field in request
^32  30.00 -3.57  39  4350  4350  4500   ---   ---     0     0 Optimal