--- smartctl10T.txt 2023-05-05 17:29:23.600317555 +1000 +++ smartctl14T.txt 2023-05-05 17:14:54.219065085 +1000 @@ -2,106 +2,32 @@ Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === -Model Family: Seagate IronWolf -Device Model: ST10000VN0004-1ZD101 -Serial Number: ZA2APHKA -LU WWN Device Id: 5 000c50 0b5317fd5 -Firmware Version: SC60 -User Capacity: 10,000,831,348,736 bytes [10.0 TB] -Sector Sizes: 512 bytes logical, 4096 bytes physical +Device Model: ST14000NM001G +Serial Number: ZLW1XSWP +LU WWN Device Id: 5 000c50 0c74e627d +Firmware Version: SN03 +User Capacity: 14,000,519,643,136 bytes [14.0 TB] +Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm -Form Factor: 3.5 inches -Device is: In smartctl database 7.3/5319 -ATA Version is: ACS-3 T13/2161-D revision 5 -SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) -Local Time is: Fri May 5 17:29:23 2023 AEST +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.0, 6.0 Gb/s +Local Time is: Fri May 5 17:14:54 2023 AEST SMART support is: Available - device has SMART capability. SMART support is: Enabled +Read SMART Data failed: scsi error badly formed scsi parameters + === START OF READ SMART DATA SECTION === -SMART overall-health self-assessment test result: PASSED +SMART Status command failed: scsi error badly formed scsi parameters +SMART overall-health self-assessment test result: UNKNOWN! +SMART Status, Attributes and Thresholds cannot be read. + +Read SMART Log Directory failed: scsi error badly formed scsi parameters + +Read SMART Error Log failed: scsi error badly formed scsi parameters + +Read SMART Self-test Log failed: scsi error badly formed scsi parameters -General SMART Values: -Offline data collection status: (0x82) Offline data collection activity - was completed without error. - Auto Offline Data Collection: Enabled. -Self-test execution status: ( 0) The previous self-test routine completed - without error or no self-test has ever - been run. -Total time to complete Offline -data collection: ( 567) seconds. -Offline data collection -capabilities: (0x7b) SMART execute Offline immediate. - Auto Offline data collection on/off support. - Suspend Offline collection upon new - command. - Offline surface scan supported. - Self-test supported. - Conveyance Self-test supported. - Selective Self-test supported. -SMART capabilities: (0x0003) Saves SMART data before entering - power-saving mode. - Supports SMART auto save timer. -Error logging capability: (0x01) Error logging supported. - General Purpose Logging supported. -Short self-test routine -recommended polling time: ( 1) minutes. -Extended self-test routine -recommended polling time: ( 840) minutes. -Conveyance self-test routine -recommended polling time: ( 2) minutes. -SCT capabilities: (0x50bd) SCT Status supported. - SCT Error Recovery Control supported. - SCT Feature Control supported. - SCT Data Table supported. - -SMART Attributes Data Structure revision number: 10 -Vendor Specific SMART Attributes with Thresholds: -ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE - 1 Raw_Read_Error_Rate 0x000f 083 070 044 Pre-fail Always - 192358880 - 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 - 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 5 - 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 - 7 Seek_Error_Rate 0x000f 076 060 045 Pre-fail Always - 44362322 - 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 125 (171 10 0) - 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 - 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 5 -184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 -187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 -188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 -189 High_Fly_Writes 0x003a 086 086 000 Old_age Always - 14 -190 Airflow_Temperature_Cel 0x0022 065 063 040 Old_age Always - 35 (Min/Max 22/35) -191 G-Sense_Error_Rate 0x0032 098 098 000 Old_age Always - 4127 -192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 -193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 -194 Temperature_Celsius 0x0022 035 040 000 Old_age Always - 35 (0 14 0 0 0) -195 Hardware_ECC_Recovered 0x001a 046 009 000 Old_age Always - 192358880 -197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 -198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 -199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 -200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0 -240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 112h+40m+02.060s -241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 76791980032 -242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 58598644408 - -SMART Error Log Version: 1 -No Errors Logged - -SMART Self-test log structure revision number 1 -Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error -# 1 Conveyance offline Completed without error 00% 125 - -# 2 Conveyance offline Aborted by host 10% 125 - -# 3 Conveyance offline Completed without error 00% 121 - -# 4 Extended offline Completed without error 00% 16 - - -SMART Selective self-test log data structure revision number 1 - SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS - 1 0 0 Not_testing - 2 0 0 Not_testing - 3 0 0 Not_testing - 4 0 0 Not_testing - 5 0 0 Not_testing -Selective self-test flags (0x0): - After scanning selected spans, do NOT read-scan remainder of disk. -If Selective self-test is pending on power-up, resume after 0 minute delay. +Selective Self-tests/Logging not supported