--- smartctl10T.txt	2023-05-05 17:29:23.600317555 +1000
+++ smartctl14T.txt	2023-05-05 17:14:54.219065085 +1000
@@ -2,106 +2,32 @@
 Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
 
 === START OF INFORMATION SECTION ===
-Model Family:     Seagate IronWolf
-Device Model:     ST10000VN0004-1ZD101
-Serial Number:    ZA2APHKA
-LU WWN Device Id: 5 000c50 0b5317fd5
-Firmware Version: SC60
-User Capacity:    10,000,831,348,736 bytes [10.0 TB]
-Sector Sizes:     512 bytes logical, 4096 bytes physical
+Device Model:     ST14000NM001G
+Serial Number:    ZLW1XSWP
+LU WWN Device Id: 5 000c50 0c74e627d
+Firmware Version: SN03
+User Capacity:    14,000,519,643,136 bytes [14.0 TB]
+Sector Size:      512 bytes logical/physical
 Rotation Rate:    7200 rpm
-Form Factor:      3.5 inches
-Device is:        In smartctl database 7.3/5319
-ATA Version is:   ACS-3 T13/2161-D revision 5
-SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
-Local Time is:    Fri May  5 17:29:23 2023 AEST
+Device is:        Not in smartctl database 7.3/5319
+ATA Version is:   ATA8-ACS T13/1699-D revision 4
+SATA Version is:  SATA 3.0, 6.0 Gb/s
+Local Time is:    Fri May  5 17:14:54 2023 AEST
 SMART support is: Available - device has SMART capability.
 SMART support is: Enabled
 
+Read SMART Data failed: scsi error badly formed scsi parameters
+
 === START OF READ SMART DATA SECTION ===
-SMART overall-health self-assessment test result: PASSED
+SMART Status command failed: scsi error badly formed scsi parameters
+SMART overall-health self-assessment test result: UNKNOWN!
+SMART Status, Attributes and Thresholds cannot be read.
+
+Read SMART Log Directory failed: scsi error badly formed scsi parameters
+
+Read SMART Error Log failed: scsi error badly formed scsi parameters
+
+Read SMART Self-test Log failed: scsi error badly formed scsi parameters
 
-General SMART Values:
-Offline data collection status:  (0x82)	Offline data collection activity
-					was completed without error.
-					Auto Offline Data Collection: Enabled.
-Self-test execution status:      (   0)	The previous self-test routine completed
-					without error or no self-test has ever 
-					been run.
-Total time to complete Offline 
-data collection: 		(  567) seconds.
-Offline data collection
-capabilities: 			 (0x7b) SMART execute Offline immediate.
-					Auto Offline data collection on/off support.
-					Suspend Offline collection upon new
-					command.
-					Offline surface scan supported.
-					Self-test supported.
-					Conveyance Self-test supported.
-					Selective Self-test supported.
-SMART capabilities:            (0x0003)	Saves SMART data before entering
-					power-saving mode.
-					Supports SMART auto save timer.
-Error logging capability:        (0x01)	Error logging supported.
-					General Purpose Logging supported.
-Short self-test routine 
-recommended polling time: 	 (   1) minutes.
-Extended self-test routine
-recommended polling time: 	 ( 840) minutes.
-Conveyance self-test routine
-recommended polling time: 	 (   2) minutes.
-SCT capabilities: 	       (0x50bd)	SCT Status supported.
-					SCT Error Recovery Control supported.
-					SCT Feature Control supported.
-					SCT Data Table supported.
-
-SMART Attributes Data Structure revision number: 10
-Vendor Specific SMART Attributes with Thresholds:
-ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
-  1 Raw_Read_Error_Rate     0x000f   083   070   044    Pre-fail  Always       -       192358880
-  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
-  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       5
-  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
-  7 Seek_Error_Rate         0x000f   076   060   045    Pre-fail  Always       -       44362322
-  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       125 (171 10 0)
- 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
- 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       5
-184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
-187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
-188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
-189 High_Fly_Writes         0x003a   086   086   000    Old_age   Always       -       14
-190 Airflow_Temperature_Cel 0x0022   065   063   040    Old_age   Always       -       35 (Min/Max 22/35)
-191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -       4127
-192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       2
-193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       21
-194 Temperature_Celsius     0x0022   035   040   000    Old_age   Always       -       35 (0 14 0 0 0)
-195 Hardware_ECC_Recovered  0x001a   046   009   000    Old_age   Always       -       192358880
-197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
-198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
-199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
-200 Pressure_Limit          0x0023   100   100   001    Pre-fail  Always       -       0
-240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       112h+40m+02.060s
-241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       76791980032
-242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       58598644408
-
-SMART Error Log Version: 1
-No Errors Logged
-
-SMART Self-test log structure revision number 1
-Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
-# 1  Conveyance offline  Completed without error       00%       125         -
-# 2  Conveyance offline  Aborted by host               10%       125         -
-# 3  Conveyance offline  Completed without error       00%       121         -
-# 4  Extended offline    Completed without error       00%        16         -
-
-SMART Selective self-test log data structure revision number 1
- SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
-    1        0        0  Not_testing
-    2        0        0  Not_testing
-    3        0        0  Not_testing
-    4        0        0  Not_testing
-    5        0        0  Not_testing
-Selective self-test flags (0x0):
-  After scanning selected spans, do NOT read-scan remainder of disk.
-If Selective self-test is pending on power-up, resume after 0 minute delay.
+Selective Self-tests/Logging not supported
 
