dmesg | grep da

FreeBSD is a registered trademark of The FreeBSD Foundation.
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
efirtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: registered as a time-of-day clock, resolution 1.000000s
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada0: Serial Number 2MKxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 17166336MB (35156656128 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada1: Serial Number 4MHxxxxx
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 17166336MB (35156656128 512 byte sectors)
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada2: Serial Number 5DKxxxxx
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 17166336MB (35156656128 512 byte sectors)
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada3: Serial Number 6PGxxxxx
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 17166336MB (35156656128 512 byte sectors)
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <Micron 5300 MTFDDAK480TDS D3MU001> ACS-4 ATA SATA 3.x device
ada4: Serial Number xxx391
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 457862MB (937703088 512 byte sectors)
ada5 at ahcich6 bus 0 scbus6 target 0 lun 0
ada5: <Micron 5300 MTFDDAK480TDS D3MU001> ACS-4 ATA SATA 3.x device
ada5: Serial Number xxx497
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 15272MB (31277232 512 byte sectors)
ses0: pass1,ada1 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: pass2,ada2 in 'Slot 03', SATA Slot: scbus3 target 0
ses0: pass3,ada3 in 'Slot 04', SATA Slot: scbus4 target 0
ses0: pass4,ada4 in 'Slot 05', SATA Slot: scbus5 target 0
ses0: pass5,ada5 in 'Slot 06', SATA Slot: scbus6 target 0
Dual Console: Video Primary, Serial Secondary
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD181KFGX-68AFPN0 83.00A83> s/n 2MKxxxxx detached
(ada0:ahcich1:0:0:0): Periph destroyed
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada0: Serial Number 2MKxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 17166336MB (35156656128 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD181KFGX-68AFPN0 83.00A83> s/n 6PGxxxxx detached
(ada3:ahcich4:0:0:0): Periph destroyed
ada3 at ahcich1 bus 0 scbus1 target 0 lun 0
ada3: <WDC WD181KFGX-68AFPN0 83.00A83> ACS-4 ATA SATA 3.x device
ada3: Serial Number 6PGxxxxx
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 17166336MB (35156656128 512 byte sectors)
ses0: pass3,ada3 in 'Slot 01', SATA Slot: scbus1 target 0

-----------

camcontrol devlist

<WDC WD181KFGX-68AFPN0 83.00A83>   at scbus0 target 0 lun 0 (pass0,ada0)
<WDC WD181KFGX-68AFPN0 83.00A83>   at scbus1 target 0 lun 0 (pass3,ada3)
<WDC WD181KFGX-68AFPN0 83.00A83>   at scbus2 target 0 lun 0 (ada1,pass1)
<WDC WD181KFGX-68AFPN0 83.00A83>   at scbus3 target 0 lun 0 (ada2,pass2)
<Micron 5300 MTFDDAK480TDS D3MU001>  at scbus5 target 0 lun 0 (ada4,pass4)
<Micron 5300 MTFDDAK480TDS D3MU001>  at scbus6 target 0 lun 0 (ada5,pass5)
<AHCI SGPIO Enclosure 2.00 0001>   at scbus8 target 0 lun 0 (ses0,pass6)
<AHCI SGPIO Enclosure 2.00 0001>   at scbus13 target 0 lun 0 (ses1,pass7)

-----------

sas2flash -list

LSI Corporation SAS2 Flash Utility
Version 16.00.00.00 (2013.03.01) 
Copyright (c) 2008-2013 LSI Corporation. All rights reserved 

	No LSI SAS adapters found! Limited Command Set Available!
	ERROR: Command Not allowed without an adapter!
	ERROR: Couldn't Create Command -list
	Exiting Program.