Do this with ONLY the H200 installed, no other HBAs/Controllers....

To just flash it to IT mode without the BIOS:

1) Put the "sas2flsh" into "Advanced Mode" and Erase Existing Flash
	Command: sas2flsh -o -e 6
2) Flash H200 to IT Mode:
	Command: sas2flsh -o -f 2118it.bin
3) Verify Command: sas2flsh -listall
	
To flash it to IT mode with the BIOS:

1) Put the "sas2flsh" into "Advanced Mode" and Erase Existing Flash
	Command: sas2flsh -o -e 6
2) Flash H200 to IT Mode:
	Command: sas2flsh -o -f 2118it.bin -b mptsas2.rom
	
*** The 2118IR.bin is also here for the "IR" mode...
	
Reference: http://brycv.com/blog/2012/flashing-it-firmware-to-lsi-sas9211-8i/
Additional Reference: http://pastebin.com/YicqtWb9