Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p7 n245428-4dfb91682c1 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz (2294.87-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16588394496 (15819 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20201113/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20201113/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850)
ioapic0: MADT APIC ID 8 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
padlock0: No ACE support.
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <Realtek PCIe 2.5GbE Family Controller> port 0x5000-0x50ff mem 0xfbff0000-0xfbffffff,0xfbfe0000-0xfbfe3fff irq 16 at device 0.0 on pci1
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: version:1.96.04
re0: Ethernet address: 30:52:5a:00:30:8a

This product is covered by one or more of the following patents:            
US6,570,884, US6,115,776, and US6,327,625.
re0: Ethernet address: 30:52:5a:00:30:8a
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfacf0000-0xfacf03ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0:3:0:0: no valid vpd ident found
pci0:3:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 16 at device 0.0 on pci4
bge0: APE FW version: NCSI v1.3.12.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 94:18:82:38:d3:a4
pci0:3:0:1: no valid vpd ident found
pci0:3:0:1: failed to read VPD data.
bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 17 at device 0.1 on pci4
bge1: APE FW version: NCSI v1.3.12.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 94:18:82:38:d3:a5
pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbef0000-0xfbef1fff irq 18 at device 0.0 on pci5
xhci0: 64 bytes context size, 32-bit DMA
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbde0000-0xfbde3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci6
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x4000-0x401f irq 16 at device 0.4 on pci6
usbus2 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xface0000-0xface03ff irq 20 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0x1000-0x1007,0x1008-0x100b,0x1010-0x1017,0x1018-0x101b,0x1020-0x102f,0x1030-0x103f irq 17 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0x1040-0x1047,0x1048-0x104b,0x1050-0x1057,0x1058-0x105b,0x1060-0x106f,0x1070-0x107f irq 17 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_tz0: <Thermal Zone> on acpi0
ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ichwd0: <Intel Cougar Point watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ichwd0: <Intel Cougar Point watchdog timer> at port 0x930-0x937,0x960-0x97f on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcbfff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c900002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c900002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c900002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 21c900002100
device_attach: est3 attach returned 6
Timecounter "TSC-low" frequency 1147393420 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen2.1: <HP UHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen1.1: <(0x1912) XHCI root HUB> at usbus1
uhub0 on usbus2
uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ipmi0: IPMI device rev. 2, firmware rev. 2.82, version 2.0, device support mask 0x8f
ipmi0: Number of channels 1
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
uhub1 on usbus1
uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2 on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub3 on usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Trying to mount root from zfs:boot-pool/ROOT/default []...
uhub0: 2 ports with 2 removable, self powered
uhub1: 6 ports with 6 removable, self powered
ugen1.2: <Realtek USB 10/100/1G/2.5G LAN> at usbus1
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST4000VN006-3CW104 SC60> ACS-3 ATA SATA 3.x device
ada0: Serial Number ZW60KFNL
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors)
ada1 at ata2 bus 0 scbus0 target 1 lun 0
ada1: <ST4000VN006-3CW104 SC60> ACS-3 ATA SATA 3.x device
ada1: Serial Number ZW60KCZ9
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: 3815447MB (7814037168 512 byte sectors)
ada2 at ata3 bus 0 scbus1 target 0 lun 0
ada2: <ST4000VN006-3CW104 SC60> ACS-3 ATA SATA 3.x device
ada2: Serial Number ZW60KF4Y
ada2: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada2: 3815447MB (7814037168 512 byte sectors)
ada3 at ata3 bus 0 scbus1 target 1 lun 0
ada3: <ST4000VN006-3CW104 SC60> ACS-3 ATA SATA 3.x device
ada3: Serial Number ZW60KDC4
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 3815447MB (7814037168 512 byte sectors)
ada4 at ata4 bus 0 scbus2 target 0 lun 0
ada4: <PNY CS900 250GB SSD CS900615> ACS-4 ATA SATA 3.x device
ada4: Serial Number PNY22442211010103603
ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada4: 238475MB (488397168 512 byte sectors)
Root mount waiting for: usbus0 usbus3 ada ada ada ada ada
ugen3.2: <vendor 0x8087 product 0x0024> at usbus3
uhub4 on uhub3
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0 usbus3
ugen3.3: <vendor 0x0424 product 0x2660> at usbus3
uhub6 on uhub4
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus3
ugen0.3: <Telink Wireless Receiver> at usbus0
ums0 on uhub5
ums0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
ukbd0 on uhub5
ukbd0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd2 at ukbd0
uhub6: 2 ports with 1 removable, self powered
lo0: link state changed to UP
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
CPU: Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz (2294.79-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
bge0: link state changed to DOWN
re0: link state changed to UP
bge1: link state changed to DOWN
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
Security policy loaded: MAC/ntpd (mac_ntpd)