root@truenas[/var/log]# dmesg [ 0.000000] Linux version 5.10.142+truenas (root@tnsbuilds01.tn.ixsystems.net) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Sep 26 18:20:46 UTC 2022 [ 0.000000] Command line: BOOT_IMAGE=/ROOT/22.02.4@/boot/vmlinuz-5.10.142+truenas root=ZFS=boot-pool/ROOT/22.02.4 ro libata.allow_tpm=1 systemd.unified_cgroup_hierarchy=0 amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 intel_iommu=on zfsforce=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040bffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.622 MHz processor [ 0.000814] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000818] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000824] last_pfn = 0x40bfff max_arch_pfn = 0x400000000 [ 0.000829] MTRR default type: write-back [ 0.000830] MTRR fixed ranges enabled: [ 0.000832] 00000-9FFFF write-back [ 0.000833] A0000-BFFFF uncachable [ 0.000834] C0000-FFFFF write-protect [ 0.000835] MTRR variable ranges enabled: [ 0.000837] 0 base 0F4000000 mask FFC000000 uncachable [ 0.000838] 1 base 0F8000000 mask FF8000000 uncachable [ 0.000839] 2 disabled [ 0.000840] 3 disabled [ 0.000841] 4 disabled [ 0.000841] 5 disabled [ 0.000842] 6 disabled [ 0.000843] 7 disabled [ 0.000843] 8 disabled [ 0.000844] 9 disabled [ 0.001936] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002457] last_pfn = 0xf1de4 max_arch_pfn = 0x400000000 [ 0.008787] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] [ 0.009361] RAMDISK: [mem 0x2fead000-0x33f4dfff] [ 0.009366] ACPI: Early table checksum verification disabled [ 0.009370] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP ) [ 0.009375] ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 00000002 \xd2? 0000162E) [ 0.009382] ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 00000002 \xd2? 0000162E) [ 0.009388] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20200925/tbfadt-564) [ 0.009392] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20200925/tbfadt-564) [ 0.009395] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200925/tbfadt-669) [ 0.009398] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20200925/tbfadt-669) [ 0.009402] ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 00000001 INTL 20030228) [ 0.009407] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.009411] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.009415] ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 00000001 \xd2? 0000162E) [ 0.009419] ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 00000001 00000000) [ 0.009423] ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 00000002 \xd2? 0000162E) [ 0.009428] ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 00000002 \xd2? 0000162E) [ 0.009432] ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009436] ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009441] ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 00000002 00000000) [ 0.009445] ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009450] ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009454] ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009458] ACPI: DMAR 0x00000000F1DE4A80 000378 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.009463] ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 00000001 00000000) [ 0.009467] ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.009471] ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 00000002 INTL 20030228) [ 0.009476] ACPI: SSDT 0x00000000F1DE8540 0001E1 (v01 HP pcc 00000001 INTL 20090625) [ 0.009480] ACPI: SSDT 0x00000000F1DE8740 000377 (v01 HP pmab 00000001 INTL 20090625) [ 0.009485] ACPI: SSDT 0x00000000F1DE8AC0 0013A4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.009489] ACPI: Reserving FACP table memory at [mem 0xf1de6540-0xf1de6633] [ 0.009491] ACPI: Reserving DSDT table memory at [mem 0xf1de6640-0xf1de8259] [ 0.009492] ACPI: Reserving FACS table memory at [mem 0xf1de4140-0xf1de417f] [ 0.009494] ACPI: Reserving FACS table memory at [mem 0xf1de4140-0xf1de417f] [ 0.009495] ACPI: Reserving SPCR table memory at [mem 0xf1de4180-0xf1de41cf] [ 0.009496] ACPI: Reserving MCFG table memory at [mem 0xf1de4200-0xf1de423b] [ 0.009498] ACPI: Reserving HPET table memory at [mem 0xf1de4240-0xf1de4277] [ 0.009499] ACPI: Reserving FFFF table memory at [mem 0xf1de4280-0xf1de42e3] [ 0.009500] ACPI: Reserving SPMI table memory at [mem 0xf1de4300-0xf1de433f] [ 0.009502] ACPI: Reserving ERST table memory at [mem 0xf1de4340-0xf1de456f] [ 0.009503] ACPI: Reserving APIC table memory at [mem 0xf1de4580-0xf1de47d1] [ 0.009504] ACPI: Reserving FFFF table memory at [mem 0xf1de4800-0xf1de4975] [ 0.009506] ACPI: Reserving BERT table memory at [mem 0xf1de4980-0xf1de49af] [ 0.009507] ACPI: Reserving HEST table memory at [mem 0xf1de49c0-0xf1de4a7b] [ 0.009509] ACPI: Reserving DMAR table memory at [mem 0xf1de4a80-0xf1de4df7] [ 0.009510] ACPI: Reserving FFFF table memory at [mem 0xf1de63c0-0xf1de63ec] [ 0.009511] ACPI: Reserving SSDT table memory at [mem 0xf1de8280-0xf1de83b6] [ 0.009513] ACPI: Reserving SSDT table memory at [mem 0xf1de83c0-0xf1de8536] [ 0.009514] ACPI: Reserving SSDT table memory at [mem 0xf1de8540-0xf1de8720] [ 0.009516] ACPI: Reserving SSDT table memory at [mem 0xf1de8740-0xf1de8ab6] [ 0.009517] ACPI: Reserving SSDT table memory at [mem 0xf1de8ac0-0xf1de9e63] [ 0.009526] ACPI: Local APIC address 0xfee00000 [ 0.009575] No NUMA configuration found [ 0.009576] Faking a node at [mem 0x0000000000000000-0x000000040bffefff] [ 0.009589] NODE_DATA(0) allocated [mem 0x40bfd4000-0x40bffefff] [ 0.010083] cma: Reserved 256 MiB at 0x00000003fa000000 [ 0.010118] Zone ranges: [ 0.010120] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010122] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010124] Normal [mem 0x0000000100000000-0x000000040bffefff] [ 0.010126] Device empty [ 0.010127] Movable zone start for each node [ 0.010131] Early memory node ranges [ 0.010133] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.010134] node 0: [mem 0x0000000000100000-0x00000000f1de3fff] [ 0.010136] node 0: [mem 0x0000000100000000-0x000000040bffefff] [ 0.010140] Initmem setup node 0 [mem 0x0000000000001000-0x000000040bffefff] [ 0.010142] On node 0 totalpages: 4185470 [ 0.010143] DMA zone: 64 pages used for memmap [ 0.010144] DMA zone: 21 pages reserved [ 0.010145] DMA zone: 3995 pages, LIFO batch:0 [ 0.010146] DMA32 zone: 16320 pages used for memmap [ 0.010147] DMA32 zone: 986596 pages, LIFO batch:63 [ 0.010149] Normal zone: 49920 pages used for memmap [ 0.010149] Normal zone: 3194879 pages, LIFO batch:63 [ 0.010153] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010200] On node 0, zone DMA: 100 pages in unavailable ranges [ 0.022131] On node 0, zone Normal: 25116 pages in unavailable ranges [ 0.022336] On node 0, zone Normal: 16385 pages in unavailable ranges [ 0.022464] ACPI: PM-Timer IO Port: 0x908 [ 0.022467] ACPI: Local APIC address 0xfee00000 [ 0.022478] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.022489] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.022493] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.022495] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.022497] ACPI: IRQ0 used by override. [ 0.022498] ACPI: IRQ9 used by override. [ 0.022501] Using ACPI (MADT) for SMP configuration information [ 0.022503] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.022508] ACPI: SPCR: SPCR table version 1 [ 0.022509] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size [ 0.022511] ACPI: SPCR: console: uart,mmio,0x0,9600 [ 0.022513] TSC deadline timer available [ 0.022516] smpboot: Allowing 64 CPUs, 56 hotplug CPUs [ 0.022532] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.022535] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.022536] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.022537] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.022538] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.022540] PM: hibernation: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff] [ 0.022542] PM: hibernation: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff] [ 0.022543] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.022544] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfee0ffff] [ 0.022545] PM: hibernation: Registered nosave memory: [mem 0xfee10000-0xff7fffff] [ 0.022546] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.022549] [mem 0xf8000000-0xfebfffff] available for PCI devices [ 0.022550] Booting paravirtualized kernel on bare hardware [ 0.022554] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.027561] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1 [ 0.029635] percpu: Embedded 58 pages/cpu s200664 r8192 d28712 u262144 [ 0.029648] pcpu-alloc: s200664 r8192 d28712 u262144 alloc=1*2097152 [ 0.029650] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.029661] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.029672] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47 [ 0.029683] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63 [ 0.029731] Built 1 zonelists, mobility grouping on. Total pages: 4119145 [ 0.029733] Policy zone: Normal [ 0.029735] Kernel command line: BOOT_IMAGE=/ROOT/22.02.4@/boot/vmlinuz-5.10.142+truenas root=ZFS=boot-pool/ROOT/22.02.4 ro libata.allow_tpm=1 systemd.unified_cgroup_hierarchy=0 amd_iommu=on iommu=pt kvm_amd.npt=1 kvm_amd.avic=1 intel_iommu=on zfsforce=1 [ 0.029888] DMAR: IOMMU enabled [ 0.029916] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.029917] printk: log_buf_len total cpu_extra contributions: 258048 bytes [ 0.029918] printk: log_buf_len min size: 131072 bytes [ 0.030213] printk: log_buf_len: 524288 bytes [ 0.030215] printk: early log buf free: 119656(91%) [ 0.031117] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.031570] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.032592] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.059733] Memory: 3961376K/16741880K available (12295K kernel code, 2538K rwdata, 7588K rodata, 2644K init, 3444K bss, 473296K reserved, 262144K cma-reserved) [ 0.060111] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.060133] Kernel/User page tables isolation: enabled [ 0.060183] ftrace: allocating 36503 entries in 143 pages [ 0.080687] ftrace: allocated 143 pages with 5 groups [ 0.081029] rcu: Hierarchical RCU implementation. [ 0.081031] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64. [ 0.081032] Rude variant of Tasks RCU enabled. [ 0.081033] Tracing variant of Tasks RCU enabled. [ 0.081035] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.081036] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64 [ 0.086067] NR_IRQS: 524544, nr_irqs: 936, preallocated irqs: 16 [ 0.091786] Console: colour VGA+ 80x25 [ 0.102431] printk: console [tty0] enabled [ 0.103862] ACPI: Core revision 20200925 [ 0.104023] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.104116] APIC: Switch to symmetric I/O mode setup [ 0.104183] DMAR: Host address width 39 [ 0.104248] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.104318] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da [ 0.104399] DMAR: RMRR base: 0x000000f1ffd000 end: 0x000000f1ffffff [ 0.104467] DMAR: RMRR base: 0x000000f1ff6000 end: 0x000000f1ffcfff [ 0.104535] DMAR: RMRR base: 0x000000f1f93000 end: 0x000000f1f94fff [ 0.104602] DMAR: RMRR base: 0x000000f1f8f000 end: 0x000000f1f92fff [ 0.104669] DMAR: RMRR base: 0x000000f1f7f000 end: 0x000000f1f8efff [ 0.104736] DMAR: RMRR base: 0x000000f1f7e000 end: 0x000000f1f7efff [ 0.104804] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff [ 0.104872] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff [ 0.104939] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000000e8000-0x00000000000e8fff], contact BIOS vendor for fixes [ 0.105028] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000000e8000-0x00000000000e8fff] BIOS vendor: HP; Ver: J06; Product Version: [ 0.105129] DMAR: RMRR base: 0x000000f1dee000 end: 0x000000f1deefff [ 0.105197] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.105265] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.105332] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.105332] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.105739] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.105808] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.105882] Switched APIC routing to physical flat. [ 0.106360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.124118] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22845f46e68, max_idle_ns: 440795286191 ns [ 0.124206] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.24 BogoMIPS (lpj=9578488) [ 0.124291] pid_max: default: 65536 minimum: 512 [ 0.124453] LSM: Security Framework initializing [ 0.124546] Yama: becoming mindful. [ 0.124653] AppArmor: AppArmor initialized [ 0.124731] TOMOYO Linux initialized [ 0.124882] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.124995] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.125494] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.125574] process: using mwait in idle threads [ 0.125640] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.125707] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.125776] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.125859] Spectre V2 : Mitigation: Retpolines [ 0.125924] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.126005] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.126072] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.126141] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.126223] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.126292] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.126376] MDS: Mitigation: Clear CPU buffers [ 0.126441] MMIO Stale Data: Unknown: No mitigations [ 0.138284] Freeing SMP alternatives memory: 32K [ 0.140337] smpboot: CPU0: Intel(R) Xeon(R) CPU E31265L @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.140628] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor. [ 0.140724] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.140805] Intel PMU driver. [ 0.140869] ... version: 3 [ 0.140933] ... bit width: 48 [ 0.140998] ... generic registers: 4 [ 0.141062] ... value mask: 0000ffffffffffff [ 0.141128] ... max period: 00007fffffffffff [ 0.141194] ... fixed-purpose events: 3 [ 0.141258] ... event mask: 000000070000000f [ 0.141483] rcu: Hierarchical SRCU implementation. [ 0.144862] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.145725] smp: Bringing up secondary CPUs ... [ 0.145914] x86: Booting SMP configuration: [ 0.145980] .... node #0, CPUs: #1 #2 #3 #4 [ 0.159598] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.159598] #5 #6 #7 [ 0.170817] smp: Brought up 1 node, 8 CPUs [ 0.170817] smpboot: Max logical packages: 8 [ 0.170817] smpboot: Total of 8 processors activated (38313.95 BogoMIPS) [ 0.194873] node 0 deferred pages initialised in 20ms [ 0.194878] devtmpfs: initialized [ 0.194878] x86/mm: Memory block size: 128MB [ 0.197444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.197444] futex hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 0.197540] pinctrl core: initialized pinctrl subsystem [ 0.197968] NET: Registered protocol family 16 [ 0.198166] audit: initializing netlink subsys (disabled) [ 0.198241] audit: type=2000 audit(1667410919.092:1): state=initialized audit_enabled=0 res=1 [ 0.198241] thermal_sys: Registered thermal governor 'fair_share' [ 0.198241] thermal_sys: Registered thermal governor 'bang_bang' [ 0.198241] thermal_sys: Registered thermal governor 'step_wise' [ 0.198241] thermal_sys: Registered thermal governor 'user_space' [ 0.198241] thermal_sys: Registered thermal governor 'power_allocator' [ 0.198241] cpuidle: using governor ladder [ 0.198241] cpuidle: using governor menu [ 0.200274] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.200354] ACPI: bus type PCI registered [ 0.200419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.200597] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.200696] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.200784] PCI: Using configuration type 1 for base access [ 0.200922] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.201411] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.201484] Kprobes globally optimized [ 0.201484] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.404359] ACPI: Added _OSI(Module Device) [ 0.404428] ACPI: Added _OSI(Processor Device) [ 0.404492] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.404557] ACPI: Added _OSI(Processor Aggregator Device) [ 0.404623] ACPI: Added _OSI(Linux-Dell-Video) [ 0.404688] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.404754] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.404754] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.406157] ACPI: Interpreter enabled [ 0.406234] ACPI: (supports S0 S4 S5) [ 0.406299] ACPI: Using IOAPIC for interrupt routing [ 0.406384] HEST: Table parsing has been initialized. [ 0.406452] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.408900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14]) [ 0.408973] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.409139] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.409224] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.409308] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.409391] acpi PNP0A08:00: _OSC: platform willing to grant [] [ 0.409457] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.409541] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored [ 0.409734] PCI host bridge to bus 0000:00 [ 0.409799] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff window] [ 0.409880] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.409948] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.410016] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.410083] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 0.410151] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window] [ 0.410231] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 0.410299] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 0.410376] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.410478] pci_bus 0000:00: root bus resource [bus 00-14] [ 0.410567] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000 [ 0.410728] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.410831] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.410985] pci 0000:00:06.0: [8086:010d] type 01 class 0x060400 [ 0.411085] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.411257] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.411340] pci 0000:00:1a.0: reg 0x10: [mem 0xfacf0000-0xfacf03ff] [ 0.411488] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.411628] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.411780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.411869] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.411935] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.412086] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.412236] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.412321] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.412388] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.412536] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.412685] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.412771] pci 0000:00:1c.6: Enabling MPC IRBNCE [ 0.412838] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled [ 0.412990] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.414508] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.414593] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 0.414659] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 0.414812] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.414895] pci 0000:00:1d.0: reg 0x10: [mem 0xface0000-0xface03ff] [ 0.415043] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.415178] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.415352] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 0.415589] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f [ 0.415667] pci 0000:00:1f.2: reg 0x10: [io 0x10c0-0x10c7] [ 0.415739] pci 0000:00:1f.2: reg 0x14: [io 0x10c8-0x10cb] [ 0.415812] pci 0000:00:1f.2: reg 0x18: [io 0x10d0-0x10d7] [ 0.415885] pci 0000:00:1f.2: reg 0x1c: [io 0x10d8-0x10db] [ 0.415957] pci 0000:00:1f.2: reg 0x20: [io 0x10e0-0x10ef] [ 0.416041] pci 0000:00:1f.2: reg 0x24: [io 0x10f0-0x10ff] [ 0.416200] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185 [ 0.420217] pci 0000:00:1f.5: reg 0x10: [io 0x1400-0x1407] [ 0.420302] pci 0000:00:1f.5: reg 0x14: [io 0x1408-0x140b] [ 0.420375] pci 0000:00:1f.5: reg 0x18: [io 0x1410-0x1417] [ 0.420447] pci 0000:00:1f.5: reg 0x1c: [io 0x1418-0x141b] [ 0.420520] pci 0000:00:1f.5: reg 0x20: [io 0x1420-0x142f] [ 0.420592] pci 0000:00:1f.5: reg 0x24: [io 0x1430-0x143f] [ 0.420982] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.421078] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.421184] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.421327] pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000 [ 0.421423] pci 0000:03:00.0: reg 0x10: [mem 0xfabf0000-0xfabfffff 64bit pref] [ 0.421521] pci 0000:03:00.0: reg 0x18: [mem 0xfabe0000-0xfabeffff 64bit pref] [ 0.421619] pci 0000:03:00.0: reg 0x20: [mem 0xfabd0000-0xfabdffff 64bit pref] [ 0.421709] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.421894] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.422019] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 0.422182] pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000 [ 0.422278] pci 0000:03:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit pref] [ 0.422375] pci 0000:03:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit pref] [ 0.422473] pci 0000:03:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit pref] [ 0.422564] pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.422748] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 0.432237] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.432321] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.432482] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.432588] pci 0000:04:00.0: reg 0x10: [mem 0xfbff0000-0xfbff1fff 64bit] [ 0.432860] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.444232] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.444312] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.444462] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 0.444553] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.444630] pci 0000:01:00.0: reg 0x14: [mem 0xfbef0000-0xfbef01ff] [ 0.444710] pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff] [ 0.445006] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000 [ 0.445097] pci 0000:01:00.1: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 0.445178] pci 0000:01:00.1: reg 0x14: [mem 0xfbee0000-0xfbee3fff] [ 0.445258] pci 0000:01:00.1: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 0.445530] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 0.445619] pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff] [ 0.445696] pci 0000:01:00.2: reg 0x14: [mem 0xfaff0000-0xfaff00ff] [ 0.445775] pci 0000:01:00.2: reg 0x18: [mem 0xfae00000-0xfaefffff] [ 0.445854] pci 0000:01:00.2: reg 0x1c: [mem 0xfad80000-0xfadfffff] [ 0.445934] pci 0000:01:00.2: reg 0x20: [mem 0xfad70000-0xfad77fff] [ 0.446015] pci 0000:01:00.2: reg 0x24: [mem 0xfad60000-0xfad67fff] [ 0.446094] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.446232] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.446393] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300 [ 0.446529] pci 0000:01:00.4: reg 0x20: [io 0x4000-0x401f] [ 0.456237] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.456314] pci 0000:00:1c.7: bridge window [io 0x3000-0x4fff] [ 0.456383] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] [ 0.456454] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.456558] pci_bus 0000:14: extended config space not accessible [ 0.456678] pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode) [ 0.456754] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff window] (subtractive decode) [ 0.456836] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff window] (subtractive decode) [ 0.456918] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.457000] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.457082] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 0.457164] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode) [ 0.457247] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode) [ 0.457328] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode) [ 0.457411] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.457768] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) [ 0.457878] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 0.457984] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11) [ 0.458090] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 0.458196] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) [ 0.458301] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 [ 0.458409] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. [ 0.458518] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. [ 0.458752] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.458853] pci 0000:01:00.1: vgaarb: setting as boot VGA device [ 0.458853] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.458853] pci 0000:01:00.1: vgaarb: bridge control possible [ 0.458853] vgaarb: loaded [ 0.458853] EDAC MC: Ver: 3.0.0 [ 0.458853] NetLabel: Initializing [ 0.458853] NetLabel: domain hash size = 128 [ 0.458853] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.458853] NetLabel: unlabeled traffic allowed by default [ 0.458853] PCI: Using ACPI for IRQ routing [ 0.461603] PCI: pci_cache_line_size set to 64 bytes [ 0.461657] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.461659] e820: reserve RAM buffer [mem 0xf1de4000-0xf3ffffff] [ 0.461660] e820: reserve RAM buffer [mem 0x40bfff000-0x40bffffff] [ 0.462732] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.462806] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.464236] clocksource: Switched to clocksource tsc-early [ 0.476397] VFS: Disk quotas dquot_6.6.0 [ 0.476514] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.476748] AppArmor: AppArmor Filesystem Enabled [ 0.476833] pnp: PnP ACPI init [ 0.477107] system 00:00: [io 0x0408-0x040f] has been reserved [ 0.477176] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.477244] system 00:00: [io 0x0310-0x0313] has been reserved [ 0.477310] system 00:00: [io 0x0316-0x0317] has been reserved [ 0.477377] system 00:00: [io 0x0700-0x071f] has been reserved [ 0.477444] system 00:00: [io 0x0880-0x08ff] has been reserved [ 0.477511] system 00:00: [io 0x0900-0x097f] has been reserved [ 0.477578] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 0.477646] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 0.477721] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 0.477800] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 0.477879] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 0.477958] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 0.478039] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.478107] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.478176] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved [ 0.478250] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.478321] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.478347] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.478366] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.478499] pnp: PnP ACPI: found 4 devices [ 0.484548] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.484727] NET: Registered protocol family 2 [ 0.484994] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.487843] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.488356] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.488702] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.488886] TCP: Hash tables configured (established 131072 bind 65536) [ 0.489082] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.489211] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.489453] NET: Registered protocol family 1 [ 0.489524] NET: Registered protocol family 44 [ 0.489607] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 0.489677] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.489748] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.489816] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.489891] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref] [ 0.489973] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] [ 0.490053] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.490121] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff] [ 0.490192] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.490276] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.490344] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.490419] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] [ 0.490498] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.490565] pci 0000:00:1c.7: bridge window [io 0x3000-0x4fff] [ 0.490635] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] [ 0.490705] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.492306] pci 0000:00:1e.0: PCI bridge to [bus 14] [ 0.492381] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff window] [ 0.492449] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.492516] pci_bus 0000:00: resource 6 [io 0x0000-0x03af window] [ 0.492584] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window] [ 0.492650] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 0.492718] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window] [ 0.492786] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb window] [ 0.492853] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df window] [ 0.492921] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window] [ 0.492990] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff] [ 0.493057] pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.493137] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.493205] pci_bus 0000:01: resource 0 [io 0x3000-0x4fff] [ 0.493271] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbefffff] [ 0.493338] pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.493418] pci_bus 0000:14: resource 4 [mem 0xf8000000-0xfbffffff window] [ 0.493486] pci_bus 0000:14: resource 5 [io 0x1000-0xffff window] [ 0.493553] pci_bus 0000:14: resource 6 [io 0x0000-0x03af window] [ 0.493621] pci_bus 0000:14: resource 7 [io 0x03e0-0x0cf7 window] [ 0.493688] pci_bus 0000:14: resource 8 [io 0x0d00-0x0fff window] [ 0.493755] pci_bus 0000:14: resource 9 [mem 0xfed00000-0xfed44fff window] [ 0.493823] pci_bus 0000:14: resource 10 [io 0x03b0-0x03bb window] [ 0.493890] pci_bus 0000:14: resource 11 [io 0x03c0-0x03df window] [ 0.493958] pci_bus 0000:14: resource 12 [mem 0x000a0000-0x000bffff window] [ 0.516320] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x710 took 21731 usecs [ 0.536308] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x710 took 19425 usecs [ 0.536593] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.536850] PCI: CLS 64 bytes, default 64 [ 0.536987] Trying to unpack rootfs image as initramfs... [ 1.564170] Freeing initrd memory: 66180K [ 1.564436] DMAR: No ATSR found [ 1.564867] DMAR: dmar0: Using Queued invalidation [ 1.565000] pci 0000:00:00.0: Adding to iommu group 0 [ 1.565086] pci 0000:00:01.0: Adding to iommu group 1 [ 1.565162] pci 0000:00:06.0: Adding to iommu group 2 [ 1.565238] pci 0000:00:1a.0: Adding to iommu group 3 [ 1.565315] pci 0000:00:1c.0: Adding to iommu group 4 [ 1.565394] pci 0000:00:1c.4: Adding to iommu group 5 [ 1.565471] pci 0000:00:1c.6: Adding to iommu group 6 [ 1.565549] pci 0000:00:1c.7: Adding to iommu group 7 [ 1.565626] pci 0000:00:1d.0: Adding to iommu group 8 [ 1.565705] pci 0000:00:1e.0: Adding to iommu group 9 [ 1.565791] pci 0000:00:1f.0: Adding to iommu group 10 [ 1.565867] pci 0000:00:1f.2: Adding to iommu group 10 [ 1.565942] pci 0000:00:1f.5: Adding to iommu group 10 [ 1.566025] pci 0000:03:00.0: Adding to iommu group 11 [ 1.566105] pci 0000:03:00.1: Adding to iommu group 11 [ 1.566181] pci 0000:04:00.0: Adding to iommu group 12 [ 1.566269] pci 0000:01:00.0: Adding to iommu group 13 [ 1.566346] pci 0000:01:00.1: Adding to iommu group 13 [ 1.566423] pci 0000:01:00.2: Adding to iommu group 13 [ 1.566499] pci 0000:01:00.4: Adding to iommu group 13 [ 1.566607] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.566677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.566747] software IO TLB: mapped [mem 0x00000000edde4000-0x00000000f1de4000] (64MB) [ 1.567949] Initialise system trusted keyrings [ 1.568031] Key type blacklist registered [ 1.568165] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.569608] zbud: loaded [ 1.569906] integrity: Platform Keyring initialized [ 1.569977] Key type asymmetric registered [ 1.570044] Asymmetric key parser 'x509' registered [ 1.570118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.570250] io scheduler mq-deadline registered [ 1.571578] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.571659] intel_idle: MWAIT substates: 0x1120 [ 1.571661] intel_idle: v0.5.1 model 0x2A [ 1.572034] intel_idle: Local APIC timer is reliable in all C-states [ 1.572509] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.572577] ACPI: Thermal Zone [THM0] (8 C) [ 1.572672] ERST: Error Record Serialization Table (ERST) support is initialized. [ 1.572755] pstore: Registered erst as persistent store backend [ 1.572865] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 1.573075] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.573417] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.573857] Linux agpgart interface v0.103 [ 1.573951] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.574638] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.576435] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.576506] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.576741] mousedev: PS/2 mouse device common for all mice [ 1.576851] rtc_cmos 00:01: RTC can wake from S4 [ 1.577112] rtc_cmos 00:01: registered as rtc0 [ 1.577229] rtc_cmos 00:01: setting system clock to 2022-11-02T17:42:01 UTC (1667410921) [ 1.577331] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.577413] intel_pstate: Intel P-state driver initializing [ 1.578401] ledtrig-cpu: registered to indicate activity on CPUs [ 1.578825] NET: Registered protocol family 10 [ 1.589444] Segment Routing with IPv6 [ 1.589527] mip6: Mobile IPv6 [ 1.589592] NET: Registered protocol family 17 [ 1.589744] mpls_gso: MPLS GSO support [ 1.590447] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 1.590664] microcode: Microcode Update Driver: v2.2. [ 1.590667] IPI shorthand broadcast: enabled [ 1.590806] sched_clock: Marking stable (1572462430, 17898264)->(1599914845, -9554151) [ 1.591025] registered taskstats version 1 [ 1.591093] Loading compiled-in X.509 certificates [ 1.626241] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.626339] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 1.626442] zswap: loaded using pool lzo/zbud [ 1.626916] Key type ._fscrypt registered [ 1.626992] Key type .fscrypt registered [ 1.627057] Key type fscrypt-provisioning registered [ 1.627184] pstore: Using crash dump compression: deflate [ 1.627269] AppArmor: AppArmor sha1 policy hashing enabled [ 1.628749] Freeing unused kernel image (initmem) memory: 2644K [ 1.652302] Write protecting the kernel read-only data: 22528k [ 1.652886] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.653169] Freeing unused kernel image (rodata/data gap) memory: 604K [ 1.703575] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.703645] x86/mm: Checking user space page tables [ 1.746413] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.746495] Run /init as init process [ 1.746566] with arguments: [ 1.746567] /init [ 1.746568] with environment: [ 1.746569] HOME=/ [ 1.746570] TERM=linux [ 1.746571] BOOT_IMAGE=/ROOT/22.02.4@/boot/vmlinuz-5.10.142+truenas [ 1.746572] intel_iommu=on [ 1.746573] zfsforce=1 [ 1.865912] fjes: module verification failed: signature and/or required key missing - tainting kernel [ 1.868258] pps_core: LinuxPPS API ver. 1 registered [ 1.868329] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.869002] PTP clock support registered [ 1.869826] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20200925/utaddress-204) [ 1.869938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.870070] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.875065] ACPI: bus type USB registered [ 1.875163] usbcore: registered new interface driver usbfs [ 1.875255] usbcore: registered new interface driver hub [ 1.875367] usbcore: registered new device driver usb [ 1.876824] SCSI subsystem initialized [ 1.879430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.879494] cryptd: max_cpu_qlen set to 1000 [ 1.882617] libata version 3.00 loaded. [ 1.885175] ehci-pci: EHCI PCI platform driver [ 1.885187] uhci_hcd: USB Universal Host Controller Interface driver [ 1.885547] ata_piix 0000:00:1f.2: version 2.13 [ 1.885579] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.885666] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.885699] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.885774] ehci-pci 0000:00:1a.0: debug port 2 [ 1.886330] scsi host0: ata_piix [ 1.886709] AVX version of gcm_enc/dec engaged. [ 1.886793] AES CTR mode by8 optimization enabled [ 1.886933] scsi host1: ata_piix [ 1.887101] ata1: SATA max UDMA/133 cmd 0x10c0 ctl 0x10c8 bmdma 0x10e0 irq 17 [ 1.887193] ata2: SATA max UDMA/133 cmd 0x10d0 ctl 0x10d8 bmdma 0x10e8 irq 17 [ 1.887490] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.887968] scsi host2: ata_piix [ 1.888237] scsi host3: ata_piix [ 1.888404] ata3: SATA max UDMA/133 cmd 0x1400 ctl 0x1408 bmdma 0x1420 irq 17 [ 1.888493] ata4: SATA max UDMA/133 cmd 0x1410 ctl 0x1418 bmdma 0x1428 irq 17 [ 1.889819] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.889913] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000 [ 1.908226] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.908399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.908507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.908624] usb usb1: Product: EHCI Host Controller [ 1.908699] usb usb1: Manufacturer: Linux 5.10.142+truenas ehci_hcd [ 1.908773] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.908995] hub 1-0:1.0: USB hub found [ 1.909083] hub 1-0:1.0: 2 ports detected [ 1.909277] uhci_hcd 0000:01:00.4: UHCI Host Controller [ 1.909279] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.909292] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.911026] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 [ 1.911150] xhci_hcd 0000:04:00.0: Zeroing 64bit base registers, expecting fault [ 1.911247] uhci_hcd 0000:01:00.4: detected 8 ports [ 1.911677] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports [ 1.911873] uhci_hcd 0000:01:00.4: irq 27, io base 0x00004000 [ 1.912099] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 1.912273] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.912441] usb usb3: Product: UHCI Host Controller [ 1.912592] usb usb3: Manufacturer: Linux 5.10.142+truenas uhci_hcd [ 1.912722] usb usb3: SerialNumber: 0000:01:00.4 [ 1.913026] hub 3-0:1.0: USB hub found [ 1.913183] hub 3-0:1.0: 2 ports detected [ 1.948822] xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410 [ 1.949375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.949470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.949552] usb usb2: Product: xHCI Host Controller [ 1.949620] usb usb2: Manufacturer: Linux 5.10.142+truenas xhci-hcd [ 1.949689] usb usb2: SerialNumber: 0000:04:00.0 [ 1.949932] hub 2-0:1.0: USB hub found [ 1.950009] hub 2-0:1.0: 2 ports detected [ 1.950244] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.950280] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.950335] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.950404] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 1.950514] ehci-pci 0000:00:1d.0: debug port 2 [ 1.950587] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.950776] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 00:fd:45:fd:e5:84 [ 1.950932] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.951074] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.951205] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.952314] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.952462] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.952572] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.952685] usb usb5: Product: xHCI Host Controller [ 1.952778] usb usb5: Manufacturer: Linux 5.10.142+truenas xhci-hcd [ 1.952866] usb usb5: SerialNumber: 0000:04:00.0 [ 1.953121] hub 5-0:1.0: USB hub found [ 1.953217] hub 5-0:1.0: 2 ports detected [ 1.954571] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.954668] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000 [ 1.969204] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 00:fd:45:fd:e5:85 [ 1.969293] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.969379] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.969462] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.972223] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.972600] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.972687] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.972769] usb usb4: Product: EHCI Host Controller [ 1.972837] usb usb4: Manufacturer: Linux 5.10.142+truenas ehci_hcd [ 1.972907] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.973145] hub 4-0:1.0: USB hub found [ 1.973229] hub 4-0:1.0: 2 ports detected [ 2.152228] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 2.155047] DMAR: DRHD: handling fault status reg 2 [ 2.155124] DMAR: [INTR-REMAP] Request device [01:00.0] fault index 15 [fault reason 38] Blocked an interrupt request due to source-id verification failure [ 2.172538] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.213999] ata4: SATA link down (SStatus 0 SControl 300) [ 2.232233] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 2.328674] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.328770] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.329084] hub 1-1:1.0: USB hub found [ 2.329297] hub 1-1:1.0: 6 ports detected [ 2.372296] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.375717] ata3.00: ATA-9: CT240BX500SSD1, M6CR013, max UDMA/133 [ 2.375821] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.385111] ata3.00: configured for UDMA/133 [ 2.388893] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.389010] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.389323] hub 4-1:1.0: USB hub found [ 2.389605] hub 4-1:1.0: 6 ports detected [ 2.568246] tsc: Refined TSC clocksource calibration: 2394.560 MHz [ 2.568336] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns [ 2.568479] clocksource: Switched to clocksource tsc [ 2.672309] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.672390] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.672599] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.672687] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.676244] usb 4-1.3: new high-speed USB device number 3 using ehci-pci [ 2.696792] ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 2.696888] ata2.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.697028] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 2.697126] ata1.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.697261] ata2.01: ATA-10: WDC WD40EFAX-68JH4N1, 83.00A83, max UDMA/133 [ 2.697360] ata2.01: 7814037168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.697489] ata1.01: ATA-10: WDC WD40EFAX-68JH4N1, 83.00A83, max UDMA/133 [ 2.697567] ata1.01: 7814037168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.716801] ata1.00: configured for UDMA/133 [ 2.716950] ata2.00: configured for UDMA/133 [ 2.719833] ata1.01: configured for UDMA/133 [ 2.719926] ata2.01: configured for UDMA/133 [ 2.720193] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5 [ 2.720969] scsi 0:0:1:0: Direct-Access ATA WDC WD40EFAX-68J 0A83 PQ: 0 ANSI: 5 [ 2.721553] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ: 0 ANSI: 5 [ 2.722077] scsi 1:0:1:0: Direct-Access ATA WDC WD40EFAX-68J 0A83 PQ: 0 ANSI: 5 [ 2.722567] scsi 2:0:0:0: Direct-Access ATA CT240BX500SSD1 R013 PQ: 0 ANSI: 5 [ 2.727968] tg3 0000:03:00.0 eno1: renamed from eth0 [ 2.731614] sd 2:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.731673] sd 0:0:1:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.731701] sd 0:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.731716] sd 2:0:0:0: [sde] Write Protect is off [ 2.731719] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.731726] sd 1:0:1:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.731728] sd 1:0:1:0: [sdd] 4096-byte physical blocks [ 2.731749] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.731789] sd 0:0:1:0: [sda] 4096-byte physical blocks [ 2.731803] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.731819] sd 1:0:1:0: [sdd] Write Protect is off [ 2.731820] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.731837] sd 1:0:0:0: [sdc] Write Protect is off [ 2.731838] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.731868] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.731888] sd 0:0:0:0: [sdb] Write Protect is off [ 2.731898] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.731963] sd 0:0:1:0: [sda] Write Protect is off [ 2.732027] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.732096] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.732200] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.732275] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.780437] tg3 0000:03:00.1 eno2: renamed from eth1 [ 2.782600] sde: sde1 sde2 sde3 [ 2.784696] usb 4-1.3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01 [ 2.784792] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.785230] hub 4-1.3:1.0: USB hub found [ 2.785414] hub 4-1.3:1.0: 2 ports detected [ 2.820617] sd 2:0:0:0: [sde] Attached SCSI disk [ 2.836592] sdc: sdc1 sdc2 [ 2.856474] sdd: sdd1 sdd2 [ 2.875976] sdb: sdb1 sdb2 [ 2.876105] sda: sda1 sda2 [ 2.880686] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.896887] sd 1:0:1:0: [sdd] Attached SCSI disk [ 2.912620] sd 0:0:0:0: [sdb] Attached SCSI disk [ 2.917206] sd 0:0:1:0: [sda] Attached SCSI disk [ 4.972259] usb 3-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02 [ 4.972360] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.972445] usb 3-1: Product: Virtual Keyboard [ 4.972511] usb 3-1: Manufacturer: BMC [ 6.215967] hid: raw HID events driver (C) Jiri Kosina [ 7.204433] usbcore: registered new interface driver usbhid [ 7.204502] usbhid: USB HID core driver [ 7.207280] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0001/input/input3 [ 7.264458] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 7.264651] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0002/input/input4 [ 7.264961] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 7.364213] raid6: sse2x4 gen() 13650 MB/s [ 7.432209] raid6: sse2x4 xor() 8091 MB/s [ 7.500208] raid6: sse2x2 gen() 15663 MB/s [ 7.568209] raid6: sse2x2 xor() 8635 MB/s [ 7.636210] raid6: sse2x1 gen() 12525 MB/s [ 7.704209] raid6: sse2x1 xor() 7753 MB/s [ 7.704283] raid6: using algorithm sse2x2 gen() 15663 MB/s [ 7.704349] raid6: .... xor() 8635 MB/s, rmw enabled [ 7.704415] raid6: using ssse3x2 recovery algorithm [ 7.704853] xor: automatically using best checksumming function avx [ 7.705291] async_tx: api initialized (async) [ 7.750385] spl: loading out-of-tree module taints kernel. [ 7.753945] znvpair: module license 'CDDL' taints kernel. [ 7.754017] Disabling lock debugging due to kernel taint [ 7.880698] ZFS: Loaded module v2.1.5-1, ZFS pool version 5000, ZFS filesystem version 5 [ 8.314905] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.415429] systemd[1]: Inserted module 'autofs4' [ 8.428803] ERST: [Firmware Warn]: Firmware does not respond in time. [ 8.439231] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 8.456410] systemd[1]: Detected architecture x86-64. [ 8.483876] systemd[1]: Set hostname to . [ 8.561511] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 8.664447] systemd[1]: Queued start job for default target TrueNAS Target. [ 8.664821] random: systemd: uninitialized urandom read (16 bytes read) [ 8.677634] systemd[1]: Created slice system-modprobe.slice. [ 8.677949] random: systemd: uninitialized urandom read (16 bytes read) [ 8.678336] systemd[1]: Created slice User and Session Slice. [ 8.678647] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.678961] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.679439] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.679704] systemd[1]: Reached target Local Encrypted Volumes. [ 8.679972] systemd[1]: Reached target Paths. [ 8.680290] systemd[1]: Reached target Slices. [ 8.680549] systemd[1]: Reached target Swap. [ 8.680947] systemd[1]: Listening on D-Bus System Message Bus Socket. [ 8.681217] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.681529] systemd[1]: Listening on LVM2 poll daemon socket. [ 8.686308] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.688047] systemd[1]: Listening on Process Core Dump Socket. [ 8.688350] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.688733] systemd[1]: Listening on Journal Audit Socket. [ 8.689058] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.689404] systemd[1]: Listening on Journal Socket. [ 8.690516] systemd[1]: Listening on udev Control Socket. [ 8.690833] systemd[1]: Listening on udev Kernel Socket. [ 8.691927] systemd[1]: Mounting Huge Pages File System... [ 8.693156] systemd[1]: Mounting POSIX Message Queue File System... [ 8.694415] systemd[1]: Mounting RPC Pipe File System... [ 8.695536] systemd[1]: Mounting Kernel Debug File System... [ 8.696705] systemd[1]: Mounting Kernel Trace File System... [ 8.697164] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.698096] systemd[1]: Mounting Temporary Directory (/tmp)... [ 8.698458] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 8.698812] systemd[1]: Finished Availability of block devices. [ 8.700370] systemd[1]: Started D-Bus System Message Bus. [ 8.702802] systemd[1]: Condition check resulted in Reboot to TrueNAS core being skipped. [ 8.704200] systemd[1]: Starting TrueNAS Update... [ 8.706380] systemd[1]: Starting Set the console keyboard layout... [ 8.707754] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.709542] systemd[1]: Starting Load Kernel Module configfs... [ 8.710804] systemd[1]: Starting Load Kernel Module drm... [ 8.712363] systemd[1]: Starting Load Kernel Module fuse... [ 8.716083] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.718881] systemd[1]: Starting Journal Service... [ 8.720723] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.722499] systemd[1]: Starting Coldplug All udev Devices... [ 8.724473] fuse: init (API version 7.32) [ 8.725850] systemd[1]: Mounted Huge Pages File System. [ 8.726281] systemd[1]: Mounted POSIX Message Queue File System. [ 8.726670] systemd[1]: Mounted Kernel Debug File System. [ 8.727072] systemd[1]: Mounted Kernel Trace File System. [ 8.727455] systemd[1]: Mounted Temporary Directory (/tmp). [ 8.728477] systemd[1]: Finished TrueNAS Update. [ 8.729601] systemd[1]: Finished Set the console keyboard layout. [ 8.730457] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.730971] RPC: Registered named UNIX socket transport module. [ 8.731004] systemd[1]: modprobe@configfs.service: Succeeded. [ 8.731053] RPC: Registered udp transport module. [ 8.731195] RPC: Registered tcp transport module. [ 8.731274] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.731554] systemd[1]: Finished Load Kernel Module configfs. [ 8.732635] systemd[1]: Mounted RPC Pipe File System. [ 8.733198] systemd[1]: modprobe@fuse.service: Succeeded. [ 8.733859] systemd[1]: Finished Load Kernel Module fuse. [ 8.734835] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.736618] systemd[1]: Mounting FUSE Control File System... [ 8.738375] systemd[1]: Mounting Kernel Configuration File System... [ 8.740446] systemd[1]: Starting Extract /conf/base... [ 8.743450] systemd[1]: Starting pNFS block layout mapping daemon... [ 8.744824] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.744992] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.746023] systemd[1]: Starting Load/Save Random Seed... [ 8.747719] systemd[1]: Starting Create System Users... [ 8.747992] random: crng init done [ 8.748072] random: 43 urandom warning(s) missed due to ratelimiting [ 8.749640] systemd[1]: modprobe@drm.service: Succeeded. [ 8.750320] systemd[1]: Finished Load Kernel Module drm. [ 8.750833] systemd[1]: Mounted FUSE Control File System. [ 8.751231] systemd[1]: Mounted Kernel Configuration File System. [ 8.753361] systemd[1]: Started pNFS block layout mapping daemon. [ 8.754795] systemd[1]: Finished Extract /conf/base. [ 8.756658] systemd[1]: Starting TrueNAS Middleware... [ 8.762928] systemd[1]: Finished Create System Users. [ 8.764273] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.802913] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.803341] systemd[1]: Reached target Local File Systems (Pre). [ 8.804635] systemd[1]: Mounting /boot/grub... [ 8.804928] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. [ 8.805070] systemd[1]: Reached target Containers. [ 8.806963] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 8.811126] systemd[1]: Finished Load/Save Random Seed. [ 8.811579] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 8.825468] systemd[1]: Finished Coldplug All udev Devices. [ 8.828053] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 8.828727] systemd[1]: Mounted /boot/grub. [ 8.833069] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 8.841979] systemd[1]: Started Journal Service. [ 8.850962] systemd-journald[631]: Received client request to flush runtime journal. [ 8.897237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.897774] ACPI: Power Button [PWRF] [ 8.898701] power_meter ACPI000D:00: Found ACPI power meter. [ 8.898799] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 8.898875] power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.905792] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 8.912073] IPMI message handler: version 39.2 [ 8.914124] ipmi device interface [ 8.954137] ipmi_si: IPMI System Interface driver [ 8.954241] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 8.954320] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 8.954411] ipmi_si: Adding SMBIOS-specified kcs state machine [ 8.955368] iTCO_vendor_support: vendor-support=0 [ 8.956531] hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized [ 8.956838] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 8.956941] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 8.959857] hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: Version: 2.0.3 [ 8.959932] hpwdt 0000:01:00.0: timeout: 30 seconds (nowayout=0) [ 8.960001] hpwdt 0000:01:00.0: pretimeout: on. [ 8.960076] hpwdt 0000:01:00.0: kdumptimeout: -1. [ 8.984767] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 8.987199] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.987380] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 8.987574] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 8.987753] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 8.989811] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 9.072992] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.073098] ipmi_si: Adding ACPI-specified kcs state machine [ 9.073439] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.073474] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 9.073574] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.086078] mgag200 0000:01:00.1: vgaarb: deactivate vga console [ 9.087868] Console: switching to colour dummy device 80x25 [ 9.097952] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 9.097963] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.097967] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.098057] [drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0 [ 9.100049] fbcon: mgag200drmfb (fb0) is primary device [ 9.243745] Console: switching to colour frame buffer device 128x48 [ 9.276286] mgag200 0000:01:00.1: [drm] fb0: mgag200drmfb frame buffer device [ 9.287840] Error: Driver 'pcspkr' is already registered, aborting... [ 9.432318] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.645677] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13) [ 9.694730] intel_rapl_common: Found RAPL domain package [ 9.694777] intel_rapl_common: Found RAPL domain core [ 9.812463] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.838109] ipmi_ssif: IPMI SSIF Interface driver [ 21.236298] device-mapper: uevent: version 1.0.3 [ 21.237047] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 21.356255] Adding 16777212k swap on /dev/mapper/sde3. Priority:-2 extents:1 across:16777212k SSFS [ 24.361506] dca service started, version 1.12.1 [ 24.364324] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 24.368848] NTB Resource Split driver, version 1 [ 24.371455] Software Queue-Pair Transport over NTB, version 4 [ 24.441960] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 28.607150] tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex [ 28.607849] tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX [ 28.608583] tg3 0000:03:00.0 eno1: EEE is disabled [ 28.609297] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 41.630862] md/raid1:md127: not clean -- starting background reconstruction [ 41.631715] md/raid1:md127: active with 2 out of 2 mirrors [ 41.631739] md127: detected capacity change from 0 to 2147483648 [ 42.027445] md: resync of RAID array md127 [ 42.112255] Adding 2097148k swap on /dev/mapper/md127. Priority:-3 extents:1 across:2097148k FS [ 42.450727] md: md127: resync interrupted. [ 42.508445] md127: detected capacity change from 2147483648 to 0 [ 42.509186] md: md127 stopped. [ 42.864585] md/raid1:md127: not clean -- starting background reconstruction [ 42.865507] md/raid1:md127: active with 2 out of 2 mirrors [ 42.868410] md127: detected capacity change from 0 to 2147483648 [ 43.099878] md: resync of RAID array md127 [ 43.164243] Adding 2097148k swap on /dev/mapper/md127. Priority:-2 extents:1 across:2097148k FS [ 58.716733] md/raid1:md126: not clean -- starting background reconstruction [ 58.717607] md/raid1:md126: active with 2 out of 2 mirrors [ 58.719010] md126: detected capacity change from 0 to 2147483648 [ 60.362090] md: resync of RAID array md126 [ 60.460235] Adding 2097148k swap on /dev/mapper/md126. Priority:-3 extents:1 across:2097148k FS [ 63.342207] systemd-journald[631]: Received client request to relinquish /var/log/journal/acc60bbd8f0a47f98b137cf5af6b896d access. [ 63.358123] systemd-journald[631]: Received SIGTERM from PID 1 (systemd). [ 63.359247] systemd[1]: Stopping Journal Service... [ 63.373476] systemd[1]: systemd-journald.service: Succeeded. [ 63.380783] systemd[1]: Stopped Journal Service. [ 63.396518] systemd[1]: Starting Journal Service... [ 63.428823] systemd[1]: Started Journal Service. [ 63.439074] systemd-journald[3515]: Received client request to flush runtime journal. [ 64.077864] systemd-journald[3515]: Received client request to relinquish /var/log/journal/acc60bbd8f0a47f98b137cf5af6b896d access. [ 64.082520] systemd[1]: Stopping Journal Service... [ 64.082788] systemd-journald[3515]: Received SIGTERM from PID 1 (systemd). [ 64.096615] systemd[1]: systemd-journald.service: Succeeded. [ 64.098016] systemd[1]: Stopped Journal Service. [ 64.102758] systemd[1]: Starting Journal Service... [ 64.137597] systemd[1]: Started Journal Service. [ 64.147705] systemd-journald[3573]: Received client request to flush runtime journal. [ 64.776681] audit: type=1400 audit(1667410984.695:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=3717 comm="apparmor_parser" [ 64.779784] audit: type=1400 audit(1667410984.695:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=3717 comm="apparmor_parser" [ 64.783132] audit: type=1400 audit(1667410984.695:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=3715 comm="apparmor_parser" [ 64.786388] audit: type=1400 audit(1667410984.695:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=3715 comm="apparmor_parser" [ 64.789668] audit: type=1400 audit(1667410984.695:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=3715 comm="apparmor_parser" [ 64.793166] audit: type=1400 audit(1667410984.695:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=3711 comm="apparmor_parser" [ 64.796735] audit: type=1400 audit(1667410984.695:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=3713 comm="apparmor_parser" [ 64.800430] audit: type=1400 audit(1667410984.695:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=3713 comm="apparmor_parser" [ 64.804301] audit: type=1400 audit(1667410984.707:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=3716 comm="apparmor_parser" [ 64.804305] audit: type=1400 audit(1667410984.711:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=3714 comm="apparmor_parser" [ 65.403548] DLM installed [ 65.758875] [4145]: scst: User interface thread started [ 65.760119] [3936]: scst: Attached to scsi0, channel 0, id 0, lun 0, type 0 [ 65.760855] [3936]: scst: Attached to scsi0, channel 0, id 1, lun 0, type 0 [ 65.761498] [3936]: scst: Attached to scsi1, channel 0, id 0, lun 0, type 0 [ 65.762133] [3936]: scst: Attached to scsi1, channel 0, id 1, lun 0, type 0 [ 65.762750] [3936]: scst: Attached to scsi2, channel 0, id 0, lun 0, type 0 [ 65.764379] [4154]: scst: Init thread started [ 65.764951] [4155]: scst: Task management thread started [ 65.765923] [4156]: scst: Management thread started [ 65.766493] [3936]: scst: Target template copy_manager registered successfully [ 65.771828] [3936]: scst: Target copy_manager_tgt for template copy_manager registered successfully [ 65.776590] [3936]: scst: Using security group "copy_manager_tgt" for initiator "copy_manager_sess" (target copy_manager_tgt) [ 65.781639] [3936]: scst: SCST version 3.6.0 loaded successfully (global max mem for commands ignored, per device 1595MB) [ 65.786767] [3936]: scst: Enabled features: TRACING [ 65.883651] [3936]: iscsi-scst: iSCSI SCST Target - version 3.6.0 [ 65.884347] [3936]: iscsi-scst: Registered iSCSI transport: iSCSI-TCP [ 65.885284] [3936]: scst: Target template iscsi registered successfully [ 65.885987] [4167]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.886992] [4168]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.888000] [4169]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.889005] [4170]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.890069] [4171]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.891032] [4172]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.891990] [4173]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.895084] [4174]: iscsi-scst: Read thread for pool 0000000076376d05 started [ 65.895980] [4175]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.897026] [4176]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.897945] [4177]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.902037] [4178]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.902898] [4179]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.903742] [4180]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.904841] [4181]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 65.905705] [4182]: iscsi-scst: Write thread for pool 0000000076376d05 started [ 66.015470] [3936]: iscsi-scst: Registered iSCSI transport: iSER [ 66.052821] [4204]: scst: Virtual device handler vdisk_fileio for type 0 registered successfully [ 66.053415] [4204]: scst: Virtual device handler vdisk_blockio for type 0 registered successfully [ 66.053975] [4204]: scst: Virtual device handler vdisk_nullio for type 0 registered successfully [ 66.054517] [4204]: scst: Virtual device handler vcdrom for type 5 registered successfully [ 66.065627] [4210]: iscsi-scst: iser portal with cm_id 000000005f15592e listens on 0.0.0.0:3260 [ 66.066349] [4210]: iscsi-scst: Created iser portal cm_id:000000005f15592e [ 66.067276] [4210]: iscsi-scst: iser portal with cm_id 00000000cc58f8eb listens on [::]:3260 [ 66.067845] [4210]: iscsi-scst: Created iser portal cm_id:00000000cc58f8eb [ 66.233621] [4145]: scst: Removed all devices from group copy_manager_tgt [ 66.363808] [4145]: dev_vdisk: Registering virtual vdisk_blockio device stage (BLOCKIO, ROTATIONAL) [ 66.365062] [4145]: dev_vdisk: Auto enable thin provisioning for device /dev/zvol/SmallPool/stage [ 66.365586] [4145]: dev_vdisk: Attached SCSI target virtual disk stage (file="/dev/zvol/SmallPool/stage", fs=163840MB, bs=4096, nblocks=41943044, cyln=20480) [ 66.366835] [4145]: scst: Added device stage to group copy_manager_tgt (LUN 0, flags 0x4) to target copy_manager_tgt [ 66.367435] [4145]: scst: Attached to virtual device stage (id 1) [ 66.370696] [4251]: dev_vdisk: USN for device stage changed to 00fd45fde584000 [ 66.371535] [4251]: dev_vdisk: T10 device id for device stage changed to 00fd45fde584000 [ 66.372636] [4145]: dev_vdisk: Registering virtual vdisk_blockio device work (BLOCKIO) [ 66.373991] [4145]: dev_vdisk: Auto enable thin provisioning for device /dev/zvol/SmallPool/work [ 66.374678] [4145]: dev_vdisk: Attached SCSI target virtual disk work (file="/dev/zvol/SmallPool/work", fs=51200MB, bs=4096, nblocks=13107204, cyln=6400) [ 66.376200] [4145]: scst: Added device work to group copy_manager_tgt (LUN 1, flags 0x4) to target copy_manager_tgt [ 66.376969] [4145]: scst: Attached to virtual device work (id 2) [ 66.379812] [4251]: dev_vdisk: USN for device work changed to 00fd45fde584001 [ 66.380676] [4251]: dev_vdisk: T10 device id for device work changed to 00fd45fde584001 [ 66.381860] [4145]: dev_vdisk: Registering virtual vdisk_fileio device asm-data [ 66.382743] [4145]: dev_vdisk: Attached SCSI target virtual disk asm-data (file="/mnt/LargePool/ASM/asmdata", fs=51200MB, bs=512, nblocks=104857601, cyln=51200) [ 66.385065] [4145]: scst: Added device asm-data to group copy_manager_tgt (LUN 2, flags 0x4) to target copy_manager_tgt [ 66.385831] [4145]: scst: Attached to virtual device asm-data (id 3) [ 66.389044] [4251]: dev_vdisk: T10 device id for device asm-data changed to 00fd45fde584002 [ 66.390033] [4251]: dev_vdisk: USN for device asm-data changed to 00fd45fde584002 [ 66.391284] [4145]: dev_vdisk: Registering virtual vdisk_fileio device asm-fra [ 66.392645] [4145]: dev_vdisk: Attached SCSI target virtual disk asm-fra (file="/mnt/LargePool/ASM/asmfra", fs=40960MB, bs=512, nblocks=83886081, cyln=40960) [ 66.394864] [4145]: scst: Added device asm-fra to group copy_manager_tgt (LUN 3, flags 0x4) to target copy_manager_tgt [ 66.395794] [4145]: scst: Attached to virtual device asm-fra (id 4) [ 66.399250] [4251]: dev_vdisk: T10 device id for device asm-fra changed to 00fd45fde584003 [ 66.403699] [4251]: dev_vdisk: USN for device asm-fra changed to 00fd45fde584003 [ 66.408314] [4210]: scst: Target iqn.2005-10.org.freenas.ctl:asm-data for template iscsi registered successfully [ 66.417333] [4145]: scst: Waiting for 1 active commands to complete... [ 66.584404] [4145]: scst: All active commands completed [ 66.585791] [4145]: scst: Added device asm-data to group security_group (LUN 0, flags 0x2) to target iqn.2005-10.org.freenas.ctl:asm-data [ 66.590252] [4145]: scst: Waiting for 1 active commands to complete... [ 66.696258] [4145]: scst: All active commands completed [ 66.697955] [4145]: scst: Added name *#* to group security_group (target iqn.2005-10.org.freenas.ctl:asm-data) [ 66.704269] [4210]: scst: Target iqn.2005-10.org.freenas.ctl:asm-fra for template iscsi registered successfully [ 66.718619] [4145]: scst: Waiting for 1 active commands to complete... [ 66.804239] [4145]: scst: All active commands completed [ 66.805701] [4145]: scst: Added device asm-fra to group security_group (LUN 0, flags 0x2) to target iqn.2005-10.org.freenas.ctl:asm-fra [ 66.808805] [4145]: scst: Waiting for 1 active commands to complete... [ 66.908243] [4145]: scst: All active commands completed [ 66.909287] [4145]: scst: Added name *#* to group security_group (target iqn.2005-10.org.freenas.ctl:asm-fra) [ 66.919511] [4210]: scst: Target iqn.2005-10.org.freenas.ctl:stage for template iscsi registered successfully [ 66.945035] [4145]: scst: Waiting for 1 active commands to complete... [ 67.068231] [4145]: scst: All active commands completed [ 67.069631] [4145]: scst: Added device stage to group security_group (LUN 0, flags 0x2) to target iqn.2005-10.org.freenas.ctl:stage [ 67.072554] [4145]: scst: Waiting for 1 active commands to complete... [ 67.184239] [4145]: scst: All active commands completed [ 67.185288] [4145]: scst: Added name *#* to group security_group (target iqn.2005-10.org.freenas.ctl:stage) [ 67.202115] [4210]: scst: Target iqn.2005-10.org.freenas.ctl:work for template iscsi registered successfully [ 67.219268] [4145]: scst: Waiting for 1 active commands to complete... [ 67.352397] [4145]: scst: All active commands completed [ 67.352791] [4145]: scst: Added device work to group security_group (LUN 0, flags 0x2) to target iqn.2005-10.org.freenas.ctl:work [ 67.353439] [4459]: scst: Waiting for 1 active commands to complete... [ 67.460267] [4459]: scst: All active commands completed [ 67.461211] [4459]: scst: Added name *#* to group security_group (target iqn.2005-10.org.freenas.ctl:work) [ 67.469236] [4145]: scst: Using autogenerated relative target id 1 for target iqn.2005-10.org.freenas.ctl:asm-data [ 67.475662] [4145]: scst: Using autogenerated relative target id 2 for target iqn.2005-10.org.freenas.ctl:asm-fra [ 67.482140] [4145]: scst: Using autogenerated relative target id 3 for target iqn.2005-10.org.freenas.ctl:stage [ 67.487585] [4145]: scst: Using autogenerated relative target id 4 for target iqn.2005-10.org.freenas.ctl:work [ 67.489780] [4210]: scst: Using security group "security_group" for initiator "iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237" (target iqn.2005-10.org.freenas.ctl:asm-fra) [ 67.493475] [4210]: iscsi-scst: Session 00000000642bed44 created: target 0000000037be7a84, tid 2, sid 0x10200003d0200, initiator iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237 [ 67.495734] [4210]: iscsi-scst: Negotiated parameters: InitialR2T No, ImmediateData Yes, MaxConnections 1, MaxRecvDataSegmentLength 1048576, MaxXmitDataSegmentLength 262144, [ 67.498031] [4210]: iscsi-scst: MaxBurstLength 1048576, FirstBurstLength 65536, DefaultTime2Wait 0, DefaultTime2Retain 0, [ 67.498052] [4210]: iscsi-scst: MaxOutstandingR2T 1, DataPDUInOrder Yes, DataSequenceInOrder Yes, ErrorRecoveryLevel 0, [ 67.511796] [4210]: iscsi-scst: HeaderDigest None, DataDigest None, OFMarker No, IFMarker No, OFMarkInt 2048, IFMarkInt 2048, RDMAExtensions No [ 67.511799] [4210]: iscsi-scst: Target parameters set for session 10200003d0200: QueuedCommands 32, Response timeout 90, Nop-In interval 30, Nop-In timeout 30 [ 67.511890] [4210]: iscsi-scst: Creating connection 00000000e545c9b3 for sid 0x10200003d0200, cid 0 (initiator iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237) [ 67.511992] [4210]: scst: Using security group "security_group" for initiator "iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237" (target iqn.2005-10.org.freenas.ctl:asm-data) [ 67.532135] [4210]: iscsi-scst: Session 000000007d76fa5e created: target 000000000ce60e0e, tid 1, sid 0x20100003d0200, initiator iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237 [ 67.532143] [4210]: iscsi-scst: Negotiated parameters: InitialR2T No, ImmediateData Yes, MaxConnections 1, MaxRecvDataSegmentLength 1048576, MaxXmitDataSegmentLength 262144, [ 67.532145] [4210]: iscsi-scst: MaxBurstLength 1048576, FirstBurstLength 65536, DefaultTime2Wait 0, DefaultTime2Retain 0, [ 67.532146] [4210]: iscsi-scst: MaxOutstandingR2T 1, DataPDUInOrder Yes, DataSequenceInOrder Yes, ErrorRecoveryLevel 0, [ 67.532149] [4210]: iscsi-scst: HeaderDigest None, DataDigest None, OFMarker No, IFMarker No, OFMarkInt 2048, IFMarkInt 2048, RDMAExtensions No [ 67.532151] [4210]: iscsi-scst: Target parameters set for session 20100003d0200: QueuedCommands 32, Response timeout 90, Nop-In interval 30, Nop-In timeout 30 [ 67.532287] [4210]: iscsi-scst: Creating connection 00000000f086d6f5 for sid 0x20100003d0200, cid 0 (initiator iqn.1993-08.org.debian:01:82cc86e3eafb#192.168.0.237) [ 85.975855] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 85.979544] Bridge firewalling registered [ 113.387337] md: md126: resync done. [ 117.313258] md: md127: resync done. [ 127.784499] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 127.785972] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 127.787134] IPVS: ipvs loaded. [ 128.021820] IPVS: [rr] scheduler registered. [ 145.819409] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 154.206054] IPv6: ADDRCONF(NETDEV_CHANGE): veth0ee4a1bc: link becomes ready [ 154.207050] kube-bridge: port 1(veth0ee4a1bc) entered blocking state [ 154.207794] kube-bridge: port 1(veth0ee4a1bc) entered disabled state [ 154.208677] device veth0ee4a1bc entered promiscuous mode [ 154.209577] kube-bridge: port 1(veth0ee4a1bc) entered blocking state [ 154.210543] kube-bridge: port 1(veth0ee4a1bc) entered forwarding state [ 159.236755] IPv6: ADDRCONF(NETDEV_CHANGE): veth055206cb: link becomes ready [ 159.239433] kube-bridge: port 2(veth055206cb) entered blocking state [ 159.240169] kube-bridge: port 2(veth055206cb) entered disabled state [ 159.241137] device veth055206cb entered promiscuous mode [ 159.242100] kube-bridge: port 2(veth055206cb) entered blocking state [ 159.242871] kube-bridge: port 2(veth055206cb) entered forwarding state