root@freenas[~]# dmesg Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-STABLE #0 r325575+4710c8b6420(HEAD): Fri Feb 14 13:59:19 UTC 2020 root@tnbuild02.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): text 80x25 CPU: Intel(R) Xeon(R) CPU E5649 @ 2.53GHz (2533.42-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 Features=0xf83fbff Features2=0x83b82203 AMD Features=0x28100800 AMD Features2=0x1 Structured Extended Features=0x2 TSC: P-state invariant Hypervisor: Origin = "VMwareVMware" real memory = 8589934592 (8192 MB) avail memory = 8249245696 (7867 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 4 package(s) WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-23 on motherboard SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! random: entropy device external interface kbd1 at kbdmux0 nexus0 vtvga0: on motherboard cryptosoft0: on motherboard aesni0: on motherboard padlock0: No ACE support. acpi0: on motherboard acpi0: Power Button (fixed) hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 cpu0: numa-domain 0 on acpi0 cpu1: numa-domain 0 on acpi0 cpu2: numa-domain 0 on acpi0 cpu3: numa-domain 0 on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0 ata0: at channel 0 on atapci0 ata1: at channel 1 on atapci0 pci0: at device 7.3 (no driver attached) vgapci0: port 0x1070-0x107f mem 0xe8000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0 vgapci0: Boot video device pcib2: at device 17.0 on pci0 pci2: on pcib2 uhci0: port 0x2000-0x201f irq 18 at device 0.0 on pci2 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: mem 0xfd5ff000-0xfd5fffff irq 19 at device 1.0 on pci2 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 ahci0: mem 0xfd5fe000-0xfd5fefff irq 17 at device 3.0 on pci2 ahci0: AHCI v1.30 with 30 6Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ahcich6: at channel 6 on ahci0 ahcich7: at channel 7 on ahci0 ahcich8: at channel 8 on ahci0 ahcich9: at channel 9 on ahci0 ahcich10: at channel 10 on ahci0 ahcich11: at channel 11 on ahci0 ahcich12: at channel 12 on ahci0 ahcich13: at channel 13 on ahci0 ahcich14: at channel 14 on ahci0 ahcich15: at channel 15 on ahci0 ahcich16: at channel 16 on ahci0 ahcich17: at channel 17 on ahci0 ahcich18: at channel 18 on ahci0 ahcich19: at channel 19 on ahci0 ahcich20: at channel 20 on ahci0 ahcich21: at channel 21 on ahci0 ahcich22: at channel 22 on ahci0 ahcich23: at channel 23 on ahci0 ahcich24: at channel 24 on ahci0 ahcich25: at channel 25 on ahci0 ahcich26: at channel 26 on ahci0 ahcich27: at channel 27 on ahci0 ahcich28: at channel 28 on ahci0 ahcich29: at channel 29 on ahci0 pcib3: at device 21.0 on pci0 pcib3: [GIANT-LOCKED] pci3: on pcib3 mpt0: port 0x4000-0x40ff mem 0xfd4ec000-0xfd4effff,0xfd4f0000-0xfd4fffff irq 18 at device 0.0 on pci3 mpt0: MPI Version=1.5.0.0 pcib4: at device 21.1 on pci0 pcib4: [GIANT-LOCKED] pcib5: at device 21.2 on pci0 pcib5: [GIANT-LOCKED] pcib6: at device 21.3 on pci0 pcib6: [GIANT-LOCKED] pcib7: at device 21.4 on pci0 pcib7: [GIANT-LOCKED] pcib8: at device 21.5 on pci0 pcib8: [GIANT-LOCKED] pcib9: at device 21.6 on pci0 pcib9: [GIANT-LOCKED] pcib10: at device 21.7 on pci0 pcib10: [GIANT-LOCKED] pcib11: at device 22.0 on pci0 pcib11: [GIANT-LOCKED] pci4: on pcib11 mps0: port 0x5000-0x50ff mem 0xfd3fc000-0xfd3fffff,0xfd380000-0xfd3bffff irq 19 at device 0.0 on pci4 mps0: IOC in fault state 0x0, resetting mps0: Firmware: 05.00.13.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 285c pcib12: at device 22.1 on pci0 pcib12: [GIANT-LOCKED] pcib13: at device 22.2 on pci0 pcib13: [GIANT-LOCKED] pcib14: at device 22.3 on pci0 pcib14: [GIANT-LOCKED] pcib15: at device 22.4 on pci0 pcib15: [GIANT-LOCKED] pcib16: at device 22.5 on pci0 pcib16: [GIANT-LOCKED] pcib17: at device 22.6 on pci0 pcib17: [GIANT-LOCKED] pcib18: at device 22.7 on pci0 pcib18: [GIANT-LOCKED] pcib19: at device 23.0 on pci0 pcib19: [GIANT-LOCKED] pci5: on pcib19 vmx0: port 0x6000-0x600f mem 0xfd2fc000-0xfd2fcfff,0xfd2fd000-0xfd2fdfff,0xfd2fe000-0xfd2fffff irq 16 at device 0.0 on pci5 vmx0: Ethernet address: 00:0c:29:89:a7:7b pcib20: at device 23.1 on pci0 pcib20: [GIANT-LOCKED] pcib21: at device 23.2 on pci0 pcib21: [GIANT-LOCKED] pcib22: at device 23.3 on pci0 pcib22: [GIANT-LOCKED] pcib23: at device 23.4 on pci0 pcib23: [GIANT-LOCKED] pcib24: at device 23.5 on pci0 pcib24: [GIANT-LOCKED] pcib25: at device 23.6 on pci0 pcib25: [GIANT-LOCKED] pcib26: at device 23.7 on pci0 pcib26: [GIANT-LOCKED] pcib27: at device 24.0 on pci0 pcib27: [GIANT-LOCKED] pcib28: at device 24.1 on pci0 pcib28: [GIANT-LOCKED] pcib29: at device 24.2 on pci0 pcib29: [GIANT-LOCKED] pcib30: at device 24.3 on pci0 pcib30: [GIANT-LOCKED] pcib31: at device 24.4 on pci0 pcib31: [GIANT-LOCKED] pcib32: at device 24.5 on pci0 pcib32: [GIANT-LOCKED] pcib33: at device 24.6 on pci0 pcib33: [GIANT-LOCKED] pcib34: at device 24.7 on pci0 pcib34: [GIANT-LOCKED] acpi_acad0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 acpi_syscontainer0: on acpi0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcbfff,0xcc000-0xccfff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 10.000 msec freenas_sysctl: adding account. freenas_sysctl: adding directoryservice. freenas_sysctl: adding middlewared. freenas_sysctl: adding network. freenas_sysctl: adding services. ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled ugen1.1: <0x15ad EHCI root HUB> at usbus1 uhub0: <0x15ad EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <0x15ad UHCI root HUB> at usbus0 uhub1: <0x15ad UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub1: 2 ports with 2 removable, self powered ugen0.2: at usbus0 ugen0.3: at usbus0 uhub2 on uhub1 uhub2: on usbus0 uhub0: 6 ports with 6 removable, self powered uhub2: 7 ports with 7 removable, self powered ses0 at mps0 bus 0 scbus33 target 16 lun 0 ses0: Fixed Enclosure Services SPC-3 SCSI device cd0 at ahcich0 bus 0 scbus2 target 0 lun 0 ses0: Serial Number SHU0954293N0HGF ses0: 300.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device cd0: Removable CD-ROM SCSI device cd0: Serial Number 00000000000000000001 cd0: 600.000MB/s transfers (SATA 3.x, ses1 at mps0 bus 0 scbus33 target 32 lun 0 UDMA2, ses1: Fixed Enclosure Services SPC-3 SCSI device ses1: Serial Number SHU0954293N0HGF ses1: 300.000MB/s transfers ses1: Command Queueing enabled ses1: SCSI-3 ENC Device ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at mpt0 bus 0 scbus32 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 8192MB (16777216 512 byte sectors) da0: quirks=0x140 da1 at mps0 bus 0 scbus33 target 9 lun 0 da1: Fixed Direct Access SPC-3 SCSI device da1: Serial Number 9QK1VMHM da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 715404MB (1465149168 512 byte sectors) da2 at mps0 bus 0 scbus33 target 10 lun 0 da2: Fixed Direct Access SPC-3 SCSI device da2: Serial Number Z2ABGXW7 da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 476940MB (976773168 512 byte sectors) da3 at mps0 bus 0 scbus33 target 11 lun 0 da3: Fixed Direct Access SPC-3 SCSI device da3: Serial Number WD-WCASYF759380 da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 610480MB (1250263728 512 byte sectors) da4 at mps0 bus 0 scbus33 target 12 lun 0 da4: Fixed Direct Access SPC-3 SCSI device da4: Serial Number WD-WCAYUY041482 da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 476940MB (976773168 512 byte sectors) da5 at mps0 bus 0 scbus33 target 13 lun 0 da5: Fixed Direct Access SPC-3 SCSI device da5: Serial Number WD-WCC2E2RPN732 da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 476940MB (976773168 512 byte sectors) da6 at mps0 bus 0 scbus33 target 14 lun 0 da6: Fixed Direct Access SPC-3 SCSI device da6: Serial Number WD-WMAYUP987186 da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 476940MB (976773168 512 byte sectors) da7 at mps0 bus 0 scbus33 target 15 lun 0 da7: Fixed Direct Access SPC-3 SCSI device da7: Serial Number WD-WCAYUK580628 da7: 300.000MB/s transfers da7: Command Queueing enabled da7: 476940MB (976773168 512 byte sectors) da8 at mps0 bus 0 scbus33 target 18 lun 0 da8: Fixed Direct Access SPC-3 SCSI device da8: Serial Number WD-WCAPW2121628 da8: 300.000MB/s transfers da8: Command Queueing enabled da8: 476940MB (976773168 512 byte sectors) da9 at mps0 bus 0 scbus33 target 19 lun 0 da9: Fixed Direct Access SPC-3 SCSI device da9: Serial Number ZFL330WR da9: 300.000MB/s transfers da9: Command Queueing enabled da9: 1907729MB (3907029168 512 byte sectors) da9: quirks=0x8<4K> da10 at mps0 bus 0 scbus33 target 21 lun 0 da10: Fixed Direct Access SPC-3 SCSI device da10: Serial Number W2ALKND7 da10: 300.000MB/s transfers da10: Command Queueing enabled da10: 476940MB (976773168 512 byte sectors) da10: quirks=0x8<4K> da11 at mps0 bus 0 scbus33 target 22 lun 0 da11: Fixed Direct Access SPC-3 SCSI device da11: Serial Number WD-WCC2ECN17473 da11: 300.000MB/s transfers da11: Command Queueing enabled da11: 476940MB (976773168 512 byte sectors) da12 at mps0 bus 0 scbus33 target 23 lun 0 da12: Fixed Direct Access SPC-3 SCSI device da12: Serial Number ZFL333WV da12: 300.000MB/s transfers da12: Command Queueing enabled da12: 1907729MB (3907029168 512 byte sectors) da12: quirks=0x8<4K> da13 at mps0 bus 0 scbus33 target 24 lun 0 da13: Fixed Direct Access SPC-3 SCSI device da13: Serial Number ZFL33126 da13: 300.000MB/s transfers da13: Command Queueing enabled da13: 1907729MB (3907029168 512 byte sectors) da13: quirks=0x8<4K> da15 at mps0 bus 0 scbus33 target 27 lun 0 da15: Fixed Direct Access SPC-3 SCSI device da15: Serial Number WD-WCC2E0016500 da15: 300.000MB/s transfers da15: Command Queueing enabled da15: 476940MB (976773168 512 byte sectors) da16 at mps0 bus 0 scbus33 target 28 lun 0 da16: Fixed Direct Access SPC-3 SCSI device da16: Serial Number WD-WMAYUM922005 da16: 300.000MB/s transfers da16: Command Queueing enabled da16: 476940MB (976773168 512 byte sectors) da17 at mps0 bus 0 scbus33 target 29 lun 0 da17: Fixed Direct Access SPC-3 SCSI device da17: Serial Number ZFL330F1 da17: 300.000MB/s transfers da17: Command Queueing enabled da17: 1907729MB (3907029168 512 byte sectors) da17: quirks=0x8<4K> da19 at mps0 bus 0 scbus33 target 31 lun 0 da19: Fixed Direct Access SPC-3 SCSI device da19: Serial Number ZFL33CRV da19: 300.000MB/s transfers da19: Command Queueing enabled da19: 1907729MB (3907029168 512 byte sectors) da19: quirks=0x8<4K> da21 at mps0 bus 0 scbus33 target 34 lun 0 da21: Fixed Direct Access SPC-3 SCSI device da21: Serial Number WD-WCC2ECN17473 da21: 300.000MB/s transfers da21: Command Queueing enabled da21: 476940MB (976773168 512 byte sectors) da22 at mps0 bus 0 scbus33 target 35 lun 0 da22: Fixed Direct Access SPC-3 SCSI device da22: Serial Number WD-WMAYUP987186 da22: 300.000MB/s transfers da22: Command Queueing enabled da22: 476940MB (976773168 512 byte sectors) da23 at mps0 bus 0 scbus33 target 36 lun 0 da23: Fixed Direct Access SPC-3 SCSI device da23: Serial Number ZFL333WV da23: 300.000MB/s transfers da23: Command Queueing enabled da23: 1907729MB (3907029168 512 byte sectors) da23: quirks=0x8<4K> da25 at mps0 bus 0 scbus33 target 38 lun 0 da25: Fixed Direct Access SPC-3 SCSI device da25: Serial Number 9QK1VMHM da25: 300.000MB/s transfers da25: Command Queueing enabled da25: 715404MB (1465149168 512 byte sectors) da26 at mps0 bus 0 scbus33 target 39 lun 0 da26: Fixed Direct Access SPC-3 SCSI device da26: Serial Number Z2ABGXW7 da26: 300.000MB/s transfers da26: Command Queueing enabled da26: 476940MB (976773168 512 byte sectors) da28 at mps0 bus 0 scbus33 target 41 lun 0 da28: Fixed Direct Access SPC-3 SCSI device da28: Serial Number WD-WCAYUK580628 da28: 300.000MB/s transfers da28: Command Queueing enabled da28: 476940MB (976773168 512 byte sectors) da27 at mps0 bus 0 scbus33 target 40 lun 0 da27: Fixed Direct Access SPC-3 SCSI device da27: Serial Number WD-WCC2E2RPN732 da27: 300.000MB/s transfers da27: Command Queueing enabled da27: 476940MB (976773168 512 byte sectors) da29 at mps0 bus 0 scbus33 target 42 lun 0 da29: Fixed Direct Access SPC-3 SCSI device da29: Serial Number ZFL33126 da29: 300.000MB/s transfers da29: Command Queueing enabled da29: 1907729MB (3907029168 512 byte sectors) da29: quirks=0x8<4K> da30 at mps0 bus 0 scbus33 target 43 lun 0 da30: Fixed Direct Access SPC-3 SCSI device da30: Serial Number ZFL33CRV da30: 300.000MB/s transfers da30: Command Queueing enabled da30: 1907729MB (3907029168 512 byte sectors) da30: quirks=0x8<4K> da34 at mps0 bus 0 scbus33 target 47 lun 0 da34: Fixed Direct Access SPC-3 SCSI device da34: Serial Number WD-WCAPW2121628 da34: 300.000MB/s transfers da34: Command Queueing enabled da34: 476940MB (976773168 512 byte sectors) da31 at mps0 bus 0 scbus33 target 44 lun 0 da31: Fixed Direct Access SPC-3 SCSI device da31: Serial Number WD-WMAYUM922005 da31: 300.000MB/s transfers da31: Command Queueing enabled da31: 476940MB (976773168 512 byte sectors) da33 at mps0 bus 0 scbus33 target 46 lun 0 da33: Fixed Direct Access SPC-3 SCSI device da33: Serial Number WD-WCASYF759380 da33: 300.000MB/s transfers da33: Command Queueing enabled da33: 610480MB (1250263728 512 byte sectors) da35 at mps0 bus 0 scbus33 target 48 lun 0 da35: Fixed Direct Access SPC-3 SCSI device da35: Serial Number ZFL330F1 da35: 300.000MB/s transfers da35: Command Queueing enabled da35: 1907729MB (3907029168 512 byte sectors) da35: quirks=0x8<4K> da40 at mps0 bus 0 scbus33 target 54 lun 0 da40: Fixed Direct Access SPC-3 SCSI device da40: Serial Number W2ALKND7 da40: 300.000MB/s transfers da40: Command Queueing enabled da40: 476940MB (976773168 512 byte sectors) da40: quirks=0x8<4K> da39 at mps0 bus 0 scbus33 target 53 lun 0 da39: Fixed Direct Access SPC-3 SCSI device da39: Serial Number WD-WCAYUY041482 da39: 300.000MB/s transfers da39: Command Queueing enabled da39: 476940MB (976773168 512 byte sectors) da37 at mps0 bus 0 scbus33 target 50 lun 0 da37: Fixed Direct Access SPC-3 SCSI device da37: Serial Number WD-WCC2E0016500 da37: 300.000MB/s transfers da37: Command Queueing enabled da37: 476940MB (976773168 512 byte sectors) da41 at mps0 bus 0 scbus33 target 55 lun 0 da41: Fixed Direct Access SPC-3 SCSI device da41: Serial Number ZFL330WR da41: 300.000MB/s transfers da41: Command Queueing enabled da41: 1907729MB (3907029168 512 byte sectors) da41: quirks=0x8<4K> da14 at mps0 bus 0 scbus33 target 26 lun 0 da14: Fixed Direct Access SPC-3 SCSI device da14: Serial Number WD-WCC2E0018958 da14: 300.000MB/s transfers da14: Command Queueing enabled da14: Attempt to query device size failed: ABORTED COMMAND, Internal target failure da32 at mps0 bus 0 scbus33 target 45 lun 0 da32: Fixed Direct Access SPC-3 SCSI device da32: 300.000MB/s transfers da32: Command Queueing enabled da32: Attempt to query device size failed: ABORTED COMMAND, Internal target failure da38 at mps0 bus 0 scbus33 target 51 lun 0 da38: Fixed Direct Access SPC-3 SCSI device da38: 300.000MB/s transfers da38: Command Queueing enabled da38: Attempt to query device size failed: ABORTED COMMAND, Internal target failure da24 at mps0 bus 0 scbus33 target 37 lun 0 da24: Fixed Direct Access SPC-3 SCSI device da24: Serial Number WD-WCC2E0018958 da24: 300.000MB/s transfers da24: Command Queueing enabled da24: Attempt to query device size failed: ABORTED COMMAND, Internal target failure da36 at mps0 bus 0 scbus33 target 49 lun 0 da36: Fixed Direct Access SPC-3 SCSI device da36: 300.000MB/s transfers da36: Command Queueing enabled da36: Attempt to query device size failed: ABORTED COMMAND, Internal target failure da42 at mps0 bus 0 scbus33 target 56 lun 0 da42: Fixed Direct Access SPC-3 SCSI device da42: 300.000MB/s transfers da42: Command Queueing enabled da42: Attempt to query device size failed: ABORTED COMMAND, Internal target failure ses0: da11,pass13: SAS Device Slot Element: 1 Phys at Slot 0 ses0: phy 0: SAS device type 1 id 0 ses1: da21,pass24: SAS Device Slot Element: 1 Phys at Slot 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c90000166b6 ses1: da26,pass29: SAS Device Slot Element: 1 Phys at Slot 1 ses0: phy 0: parent 50050cc103cd6fbf addr 50000c90000166b5 ses0: da2,pass3: SAS Device Slot Element: 1 Phys at Slot 1 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002cafe ses1: da33,pass36: SAS Device Slot Element: 1 Phys at Slot 2 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900002cafd da18 at mps0 bus 0 scbus33 target 30 lun 0 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900001667e da18: Fixed Direct Access SPC-3 SCSI device da18: Serial Number ZFL331CH da18: 300.000MB/s transfers da18: Command Queueing enabled da18: 1907729MB (3907029168 512 byte sectors) da18: quirks=0x8<4K> da20 at mps0 bus 0 scbus33 target 33 lun 0 da20: Fixed Direct Access SPC-3 SCSI device da20: Serial Number ZFL331CH da20: 300.000MB/s transfers da20: Command Queueing enabled da20: 1907729MB (3907029168 512 byte sectors) da20: quirks=0x8<4K> ses1: da39,pass42: SAS Device Slot Element: 1 Phys at Slot 3 ses0: da3,pass4: SAS Device Slot Element: 1 Phys at Slot 2 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c90000253c6 ses1: da25,pass28: SAS Device Slot Element: 1 Phys at Slot 4 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900001667d ses0: da4,pass5: SAS Device Slot Element: 1 Phys at Slot 3 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000026ca6 ses1: da27,pass30: SAS Device Slot Element: 1 Phys at Slot 5 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c90000253c5 ses0: da1,pass2: SAS Device Slot Element: 1 Phys at Slot 4 ses1: phy 0: SAS device type 1 id 1 GEOM: da1: the secondary GPT table is corrupt or invalid. ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002caae ses1: da22,pass25: SAS Device Slot Element: 1 Phys at Slot 8 GEOM: da1: using the primary only -- recovery suggested. ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000015cae ses1: da28,pass31: SAS Device Slot Element: 1 Phys at Slot 9 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000026ca5 ses0: da5,pass6: SAS Device Slot Element: 1 Phys at Slot 5 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000015c82 ses1: da34,pass37: SAS Device Slot Element: 1 Phys at Slot 10 ses0: phy 0: SAS device type 1 id 0 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000025326 ses1: da40,pass43: SAS Device Slot Element: 1 Phys at Slot 11 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900001581a ses1: da23,pass26: SAS Device Slot Element: 1 Phys at Slot 12 ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900002caad ses0: da6,pass7: SAS Device Slot Element: 1 Phys at Slot 8 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002cb0e ses1: da29,pass32: SAS Device Slot Element: 1 Phys at Slot 13 ses0: phy 0: SAS device type 1 id 0 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000015cad ses0: da7,pass8: SAS Device Slot Element: 1 Phys at Slot 9 GEOM: da2: the secondary GPT table is corrupt or invalid. ses1: phy 0: parent 50050cc103cd6eff addr 50000c90000256ee ses1: da35,pass38: SAS Device Slot Element: 1 Phys at Slot 14 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c90000254ba ses1: da41,pass44: SAS Device Slot Element: 1 Phys at Slot 15 GEOM: da2: using the primary only -- recovery suggested. ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002cad6 ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000015c81 ses0: da8,pass10: SAS Device Slot Element: 1 Phys at Slot 10 ses1: da20,pass23: SAS Device Slot Element: 1 Phys at Slot 16 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000025325 ses0: da10,pass12: SAS Device Slot Element: 1 Phys at Slot 11 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 500605ba004b3eee ses1: da30,pass33: SAS Device Slot Element: 1 Phys at Slot 17 ses0: phy 0: SAS device type 1 id 0 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002684a ses1: da36,pass39: SAS Device Slot Element: 1 Phys at Slot 18 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000015819 ses0: da12,pass14: SAS Device Slot Element: 1 Phys at Slot 12 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000026862 ses1: da42,pass45: SAS Device Slot Element: 1 Phys at Slot 19 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900002cb0d ses0: da13,pass15: SAS Device Slot Element: 1 Phys at Slot 13 ses1: phy 0: SAS device type 1 id 1 GEOM: da3: the secondary GPT table is corrupt or invalid. ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c9000024982 ses1: da24,pass27: SAS Device Slot Element: 1 Phys at Slot 20 GEOM: da3: using the primary only -- recovery suggested. ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c90000254a6 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c90000256ed ses0: da17,pass19: SAS Device Slot Element: 1 Phys at Slot 14 ses1: da31,pass34: SAS Device Slot Element: 1 Phys at Slot 21 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c90000254b9 ses0: da9,pass11: SAS Device Slot Element: 1 Phys at Slot 15 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002b56a ses1: da37,pass40: SAS Device Slot Element: 1 Phys at Slot 22 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900002cad5 ses0: da18,pass20: SAS Device Slot Element: 1 Phys at Slot 16 ses1: phy 0: SAS device type 1 id 1 ses1: phy 0: protocols: Initiator( None ) Target( SSP ) ses1: phy 0: parent 50050cc103cd6eff addr 50000c900002618a ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 500605ba004b3eed ses0: da19,pass21: SAS Device Slot Element: 1 Phys at Slot 17 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000026849 ses0: da32,pass35: SAS Device Slot Element: 1 Phys at Slot 18 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000026861 ses0: da38,pass41: SAS Device Slot Element: 1 Phys at Slot 19 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000024981 ses0: da14,pass16: SAS Device Slot Element: 1 Phys at Slot 20 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) GEOM: da4: the secondary GPT table is corrupt or invalid. ses0: phy 0: parent 50050cc103cd6fbf addr 50000c90000254a5 ses0: da16,pass18: SAS Device Slot Element: 1 Phys at Slot 21 GEOM: da4: using the primary only -- recovery suggested. ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c900002b569 ses0: da15,pass17: SAS Device Slot Element: 1 Phys at Slot 22 ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 50050cc103cd6fbf addr 50000c9000026189 random: unblocking device. GEOM: da5: the secondary GPT table is corrupt or invalid. GEOM: da5: using the primary only -- recovery suggested. Trying to mount root from zfs:freenas-boot/ROOT/11.2-U8 []... GEOM: da6: the secondary GPT table is corrupt or invalid. GEOM: da6: using the primary only -- recovery suggested. GEOM: da7: the secondary GPT table is corrupt or invalid. GEOM: da7: using the primary only -- recovery suggested. GEOM: da8: the secondary GPT table is corrupt or invalid. GEOM: da8: using the primary only -- recovery suggested. GEOM: da9: the secondary GPT table is corrupt or invalid. GEOM: da9: using the primary only -- recovery suggested. GEOM: da10: the secondary GPT table is corrupt or invalid. GEOM: da10: using the primary only -- recovery suggested. GEOM: da11: the secondary GPT table is corrupt or invalid. GEOM: da11: using the primary only -- recovery suggested. GEOM: da12: the secondary GPT table is corrupt or invalid. GEOM: da12: using the primary only -- recovery suggested. GEOM: da13: the secondary GPT table is corrupt or invalid. GEOM: da13: using the primary only -- recovery suggested. GEOM: da17: the secondary GPT table is corrupt or invalid. GEOM: da17: using the primary only -- recovery suggested. GEOM: da18: the secondary GPT table is corrupt or invalid. GEOM: da18: using the primary only -- recovery suggested. GEOM: da19: the secondary GPT table is corrupt or invalid. GEOM: da19: using the primary only -- recovery suggested. GEOM: da20: the secondary GPT table is corrupt or invalid. GEOM: da20: using the primary only -- recovery suggested. GEOM: da21: the secondary GPT table is corrupt or invalid. GEOM: da21: using the primary only -- recovery suggested. GEOM: da22: the secondary GPT table is corrupt or invalid. GEOM: da22: using the primary only -- recovery suggested. GEOM: da23: the secondary GPT table is corrupt or invalid. GEOM: da23: using the primary only -- recovery suggested. GEOM: da25: the secondary GPT table is corrupt or invalid. GEOM: da25: using the primary only -- recovery suggested. GEOM: da26: the secondary GPT table is corrupt or invalid. GEOM: da26: using the primary only -- recovery suggested. GEOM: da27: the secondary GPT table is corrupt or invalid. GEOM: da27: using the primary only -- recovery suggested. GEOM: da28: the secondary GPT table is corrupt or invalid. GEOM: da28: using the primary only -- recovery suggested. GEOM: da29: the secondary GPT table is corrupt or invalid. GEOM: da29: using the primary only -- recovery suggested. GEOM: da30: the secondary GPT table is corrupt or invalid. GEOM: da30: using the primary only -- recovery suggested. GEOM: da33: the secondary GPT table is corrupt or invalid. GEOM: da33: using the primary only -- recovery suggested. GEOM: da34: the secondary GPT table is corrupt or invalid. GEOM: da34: using the primary only -- recovery suggested. GEOM: da35: the secondary GPT table is corrupt or invalid. GEOM: da35: using the primary only -- recovery suggested. GEOM: da39: the secondary GPT table is corrupt or invalid. GEOM: da39: using the primary only -- recovery suggested. GEOM: da40: the secondary GPT table is corrupt or invalid. GEOM: da40: using the primary only -- recovery suggested. GEOM: da41: the secondary GPT table is corrupt or invalid. GEOM: da41: using the primary only -- recovery suggested. vmx_init: processor does not support VMX operation module_register_init: MOD_LOAD (vmm, 0xffffffff82a1c470, 0) error 6 GEOM_MULTIPATH: disk18 created GEOM_MULTIPATH: da41 added to disk18 GEOM_MULTIPATH: da41 is now active path in disk18 GEOM_MULTIPATH: disk17 created GEOM_MULTIPATH: da40 added to disk17 GEOM_MULTIPATH: da40 is now active path in disk17 GEOM_MULTIPATH: disk16 created GEOM_MULTIPATH: da39 added to disk16 GEOM_MULTIPATH: da39 is now active path in disk16 GEOM_MULTIPATH: disk15 created GEOM_MULTIPATH: da37 added to disk15 GEOM_MULTIPATH: da37 is now active path in disk15 GEOM_MULTIPATH: disk14 created GEOM_MULTIPATH: da35 added to disk14 GEOM_MULTIPATH: da35 is now active path in disk14 GEOM_MULTIPATH: disk13 created GEOM_MULTIPATH: da34 added to disk13 GEOM_MULTIPATH: da34 is now active path in disk13 GEOM_MULTIPATH: disk12 created GEOM_MULTIPATH: da33 added to disk12 GEOM_MULTIPATH: da33 is now active path in disk12 GEOM_MULTIPATH: disk11 created GEOM_MULTIPATH: da31 added to disk11 GEOM_MULTIPATH: da31 is now active path in disk11 GEOM_MULTIPATH: disk10 created GEOM_MULTIPATH: da30 added to disk10 GEOM_MULTIPATH: da30 is now active path in disk10 GEOM_MULTIPATH: disk9 created GEOM_MULTIPATH: da29 added to disk9 GEOM_MULTIPATH: da29 is now active path in disk9 GEOM_MULTIPATH: disk8 created GEOM_MULTIPATH: da28 added to disk8 GEOM_MULTIPATH: da28 is now active path in disk8 GEOM_MULTIPATH: disk7 created GEOM_MULTIPATH: da27 added to disk7 GEOM_MULTIPATH: da27 is now active path in disk7 GEOM_MULTIPATH: disk6 created GEOM_MULTIPATH: da26 added to disk6 GEOM_MULTIPATH: da26 is now active path in disk6 GEOM_MULTIPATH: disk4 created GEOM_MULTIPATH: da25 added to disk4 GEOM_MULTIPATH: da25 is now active path in disk4 GEOM_MULTIPATH: disk3 created GEOM_MULTIPATH: da23 added to disk3 GEOM_MULTIPATH: da23 is now active path in disk3 GEOM_MULTIPATH: disk2 created GEOM_MULTIPATH: da22 added to disk2 GEOM_MULTIPATH: da22 is now active path in disk2 GEOM_MULTIPATH: disk1 created GEOM_MULTIPATH: da21 added to disk1 GEOM_MULTIPATH: da21 is now active path in disk1 GEOM_MULTIPATH: disk5 created GEOM_MULTIPATH: da20 added to disk5 GEOM_MULTIPATH: da20 is now active path in disk5 GEOM_MULTIPATH: da19 added to disk10 GEOM_MULTIPATH: da18 added to disk5 GEOM_MULTIPATH: da17 added to disk14 GEOM_MULTIPATH: da16 added to disk11 GEOM_MULTIPATH: da15 added to disk15 GEOM_MULTIPATH: da13 added to disk9 GEOM_MULTIPATH: da12 added to disk3 GEOM_MULTIPATH: da11 added to disk1 GEOM_MULTIPATH: da10 added to disk17 GEOM_MULTIPATH: da9 added to disk18 GEOM_MULTIPATH: da8 added to disk13 GEOM_MULTIPATH: da7 added to disk8 GEOM_MULTIPATH: da6 added to disk2 GEOM_MULTIPATH: da5 added to disk7 GEOM_MULTIPATH: da4 added to disk16 GEOM_MULTIPATH: da3 added to disk12 GEOM_MULTIPATH: da2 added to disk6 GEOM_MULTIPATH: da1 added to disk4 GEOM: multipath/disk18: corrupt or invalid GPT detected. GEOM: multipath/disk18: GPT rejected -- may not be recoverable. GEOM: multipath/disk17: corrupt or invalid GPT detected. GEOM: multipath/disk17: GPT rejected -- may not be recoverable. GEOM: multipath/disk16: corrupt or invalid GPT detected. GEOM: multipath/disk16: GPT rejected -- may not be recoverable. GEOM: multipath/disk14: corrupt or invalid GPT detected. GEOM: multipath/disk14: GPT rejected -- may not be recoverable. GEOM: multipath/disk13: corrupt or invalid GPT detected. GEOM: multipath/disk13: GPT rejected -- may not be recoverable. GEOM: multipath/disk12: corrupt or invalid GPT detected. GEOM: multipath/disk12: GPT rejected -- may not be recoverable. GEOM: multipath/disk10: corrupt or invalid GPT detected. GEOM: multipath/disk10: GPT rejected -- may not be recoverable. GEOM: multipath/disk9: corrupt or invalid GPT detected. GEOM: multipath/disk9: GPT rejected -- may not be recoverable. GEOM: multipath/disk8: corrupt or invalid GPT detected. GEOM: multipath/disk8: GPT rejected -- may not be recoverable. GEOM: multipath/disk7: corrupt or invalid GPT detected. GEOM: multipath/disk7: GPT rejected -- may not be recoverable. GEOM: multipath/disk6: corrupt or invalid GPT detected. GEOM: multipath/disk6: GPT rejected -- may not be recoverable. GEOM: multipath/disk4: corrupt or invalid GPT detected. GEOM: multipath/disk4: GPT rejected -- may not be recoverable. GEOM: multipath/disk3: corrupt or invalid GPT detected. GEOM: multipath/disk3: GPT rejected -- may not be recoverable. GEOM: multipath/disk2: corrupt or invalid GPT detected. GEOM: multipath/disk2: GPT rejected -- may not be recoverable. GEOM: multipath/disk1: corrupt or invalid GPT detected. GEOM: multipath/disk1: GPT rejected -- may not be recoverable. GEOM: multipath/disk5: corrupt or invalid GPT detected. GEOM: multipath/disk5: GPT rejected -- may not be recoverable. hwpc_core: unknown PMC architecture: 1 hwpmc: SOFT/16/64/0x67 VMware memory control driver initialized vmx0: link state changed to UP root@freenas[~]#