Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p1 n245406-814eb095751 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(efifb): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           E5630  @ 2.53GHz (2527.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 68719476736 (65536 MB)
avail memory = 66812129280 (63717 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic1: MADT APIC ID 1 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 32-55
Launching APs: 1 4 7 5 10 15 2 3 11 13 8 9 12 14 6
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
padlock0: No ACE support.
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
apei0: <ACPI Platform Error Interface> on acpi0
ipmi0: <IPMI System Interface> port 0xca8,0xcac on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd4000000-0xd5ffffff irq 36 at device 0.0 on pci1
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 18:03:73:ed:92:c7
bce0: ASIC (0x57092003); 
bce0: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 48 at device 0.1 on pci1
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: 18:03:73:ed:92:c9
bce1: ASIC (0x57092003); 
bce1: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 32 at device 0.0 on pci2
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: 18:03:73:ed:92:cb
bce2: ASIC (0x57092003); 
bce2: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 42 at device 0.1 on pci2
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: 18:03:73:ed:92:cd
bce3: ASIC (0x57092003); 
bce3: link state changed to DOWN
Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bxe0: <QLogic NetXtreme II BCM57711 10GbE (A0) BXE v:1.78.91> mem 0xdc000000-0xdc7fffff,0xdc800000-0xdcffffff irq 38 at device 0.0 on pci3
bxe0: PCI BAR0 [10] memory allocated: 0xdc000000-0xdc7fffff (8388608) -> 0xfffff800dc000000
bxe0: PCI BAR2 [18] memory allocated: 0xdc800000-0xdcffffff (8388608) -> 0xfffff800dc800000
bxe0: Media not present.
bxe0: IFMEDIA flags : 20
bxe0: Using defaults for TSO: 65518/35/2048
bxe0: Ethernet address: 00:10:18:a6:f7:d8
bxe0: MSI-X vectors Requested 5 and Allocated 5
bxe1: <QLogic NetXtreme II BCM57711 10GbE (A0) BXE v:1.78.91> mem 0xdd000000-0xdd7fffff,0xdd800000-0xddffffff irq 45 at device 0.1 on pci3
bxe1: PCI BAR0 [10] memory allocated: 0xdd000000-0xdd7fffff (8388608) -> 0xfffff800dd000000
bxe1: PCI BAR2 [18] memory allocated: 0xdd800000-0xddffffff (8388608) -> 0xfffff800dd800000
bxe1: Media not present.
bxe1: IFMEDIA flags : 20
bxe1: Using defaults for TSO: 65518/35/2048
bxe1: Ethernet address: 00:10:18:a6:f7:da
bxe1: MSI-X vectors Requested 5 and Allocated 5
pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <Avago Technologies (LSI) SAS2008> port 0xfc00-0xfcff mem 0xdf1bc000-0xdf1bffff,0xdf1c0000-0xdf1fffff irq 40 at device 0.0 on pci4
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xd3800000-0xd3ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci6
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ichwd0: <Intel ICH9 watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcbfff,0xd2000-0xd2fff,0xec000-0xeffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1263499841 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ipmi0: IPMI device rev. 0, firmware rev. 2.85, version 2.0, device support mask 0xdf
ipmi0: Number of channels 5
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0 on usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2 on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Trying to mount root from zfs:boot-pool/ROOT/default []...
uhub3 on usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4 on usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub5 on usbus5
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus2 usbus5
uhub4: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: CAM usbus2 usbus5
ugen2.2: <vendor 0x0424 product 0x2514> at usbus2
uhub6 on uhub4
uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub6: MTT enabled
uhub6: 3 ports with 3 removable, self powered
ugen2.3: <SEM USB Keyboard> at usbus2
ukbd0 on uhub6
ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus2
kbd2 at ukbd0
uhid0 on uhub6
uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 3> on usbus2
Root mount waiting for: CAM usbus5
ugen3.2: <Avocent USB Composite Device-0> at usbus3
ukbd1 on uhub3
ukbd1: <Keyboard> on usbus3
kbd3 at ukbd1
ums0 on uhub3
ums0: <Mouse> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Avocent USB Composite Device-1 (0x0624:0x0249)
Root mount waiting for: CAM usbus5
ugen5.2: <Avocent USB Composite Device-1> at usbus5
umass0 on uhub5
umass0: <SCSI Transparent Interface 0> on usbus5
umass0:  SCSI over Bulk-Only; quirks = 0x4101
umass0:3:0: Attached to scbus3
umass1 on uhub5
umass1: <SCSI Transparent Interface 1> on usbus5
umass1:  SCSI over Bulk-Only; quirks = 0x4101
umass1:4:1: Attached to scbus4
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <KINGSTON SA400S37120G 03090004> ACS-3 ATA SATA 3.x device
ada0: Serial Number 50026B76829750C6
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes)
ada0: 114473MB (234441648 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 2 lun 0
da0: <ATA Samsung SSD 860 2B6Q> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number S3Z8NB0KC88772L     
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 7 lun 0
da3: <ATA Samsung SSD 860 1B6Q> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number S3Z9NB0K104440R     
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 953869MB (1953525168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 3 lun 0
da1: <ATA Samsung SSD 860 1B6Q> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number S3Z9NB0K104265X     
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 953869MB (1953525168 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 13 lun 0
da5: <ATA Samsung SSD 860 2B6Q> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number S3Z8NB0KC60722Y     
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 953869MB (1953525168 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 6 lun 0
da2: <ATA Samsung SSD 860 1B6Q> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number S3Z9NB0K104441M     
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 953869MB (1953525168 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 12 lun 0
da4: <ATA Samsung SSD 860 2B6Q> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number S3Z8NB0KC62571V     
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 953869MB (1953525168 512 byte sectors)
GEOM: da5: corrupt or invalid GPT detected.
GEOM: da5: GPT rejected -- may not be recoverable.
GEOM: da4: corrupt or invalid GPT detected.
GEOM: da4: GPT rejected -- may not be recoverable.
Root mount waiting for: da cd
cd0 at umass-sim1 bus 1 scbus4 target 0 lun 0
cd0: <iDRAC Virtual CD 0323> Removable CD-ROM SCSI device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x10<10_BYTE_ONLY>
da6 at umass-sim0 bus 0 scbus3 target 0 lun 0
da6: <iDRAC LCDRIVE 0323> Removable Direct Access SCSI device
da6: 40.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
da6: quirks=0x2<NO_6_BYTE>
da6: Write Protected
lo0: link state changed to UP
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: accelerated software
CPU: Intel(R) Xeon(R) CPU           E5630  @ 2.53GHz (2527.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
bxe0: link state changed to DOWN
bxe1: link state changed to DOWN
bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: none
bxe0: link state changed to UP
bxe1: NIC Link is Up, 10000 Mbps full duplex, Flow control: none
bxe1: link state changed to UP
bce0: Gigabit link up!
bce0: link state changed to UP
bce1: Gigabit link up!
bce1: link state changed to UP
bce0: Gigabit link up!
bce1: Gigabit link up!
bce0: Gigabit link up!
bce1: Gigabit link up!
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
Security policy loaded: MAC/ntpd (mac_ntpd)