
-----------------------
1) ZFS Pool(s) Status
-----------------------

  pool: Hector_v2
 state: DEGRADED
status: One or more devices could not be used because the label is missing or
	invalid.  Sufficient replicas exist for the pool to continue
	functioning in a degraded state.
action: Replace the device using 'zpool replace'.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-4J
  scan: scrub repaired 0B in 00:03:49 with 0 errors on Sun Jan 14 00:03:52 2024
config:

	NAME                                      STATE     READ WRITE CKSUM
	Hector_v2                                 DEGRADED     0     0     0
	  raidz1-0                                DEGRADED     0     0     0
	    21c688f6-fb3f-11ed-94fc-eca86b8be36f  ONLINE       0     0     0
	    21d028ef-fb3f-11ed-94fc-eca86b8be36f  ONLINE       0     0     0
	    13177780561838776421                  UNAVAIL      0     0     0  was /dev/disk/by-partuuid/21d6c025-fb3f-11ed-94fc-eca86b8be36f

errors: No known data errors

  pool: SSD Hector Pool
 state: ONLINE
  scan: scrub repaired 0B in 00:16:05 with 0 errors on Sun Jan 14 00:16:06 2024
config:

	NAME                                      STATE     READ WRITE CKSUM
	SSD Hector Pool                           ONLINE       0     0     0
	  mirror-0                                ONLINE       0     0     0
	    40f17474-22b1-48dc-8513-5df660772d4f  ONLINE       0     0     0
	    abfac3f7-f1aa-4248-afd7-068a74ad23bb  ONLINE       0     0     0

errors: No known data errors

  pool: boot-pool
 state: ONLINE
status: One or more features are enabled on the pool despite not being
	requested by the 'compatibility' property.
action: Consider setting 'compatibility' to an appropriate value, or
	adding needed features to the relevant file in
	/etc/zfs/compatibility.d or /usr/share/zfs/compatibility.d.
  scan: scrub repaired 0B in 00:00:32 with 0 errors on Fri Jan 19 03:45:34 2024
config:

	NAME        STATE     READ WRITE CKSUM
	boot-pool   ONLINE       0     0     0
	  sde2      ONLINE       0     0     0

errors: No known data errors
