+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1677626950                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 1 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1677626951                          +
+--------------------------------------------------------------------------------+
● smartmontools.service - Self Monitoring and Reporting Technology (SMART) Daemon
     Loaded: loaded (/lib/systemd/system/smartmontools.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2023-02-28 14:48:04 PST; 41min ago
       Docs: man:smartd(8)
             man:smartd.conf(5)
   Main PID: 4543 (smartd)
     Status: "Next check of 1 device will start at 15:48:04"
      Tasks: 1 (limit: 9119)
     Memory: 1.9M
        CPU: 1.475s
     CGroup: /system.slice/smartmontools.service
             └─4543 /usr/sbin/smartd -n --interval=1800 -q nodev

Feb 28 14:48:03 truenas smartd[4543]: Device: /dev/sda [SAT], opened
Feb 28 14:48:03 truenas smartd[4543]: Device: /dev/sda [SAT], QEMU HARDDISK, S/N:QM00005, FW:2.5+, 982 GB
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], not found in smartd database.
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], can't monitor Current_Pending_Sector count - no Attribute 197
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], can't monitor Offline_Uncorrectable count - no Attribute 198
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.QEMU_HARDDISK-QM00005.ata.state
Feb 28 14:48:04 truenas smartd[4543]: Monitoring 1 ATA/SATA, 0 SCSI/SAS and 0 NVMe devices
Feb 28 14:48:04 truenas smartd[4543]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.QEMU_HARDDISK-QM00005.ata.state
Feb 28 14:48:04 truenas systemd[1]: Started Self Monitoring and Reporting Technology (SMART) Daemon.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1677626951                        +
+--------------------------------------------------------------------------------+
debug finished in 1 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1677626952                    +
+--------------------------------------------------------------------------------+
debug finished in 1 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                          smartctl output @1677626953                           +
+--------------------------------------------------------------------------------+
/dev/sda (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.79+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     QEMU HARDDISK
Serial Number:    QM00005
Firmware Version: 2.5+
User Capacity:    982,000,248,832 bytes [982 GB]
Sector Size:      512 bytes logical/physical
TRIM Command:     Available, deterministic
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is:    Tue Feb 28 15:29:14 2023 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  288) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       16
  4 Start_Stop_Count        0x0002   100   100   020    Old_age   Always       -       100
  5 Reallocated_Sector_Ct   0x0003   100   100   036    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0003   100   100   000    Pre-fail  Always       -       1
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0003   069   069   050    Pre-fail  Always       -       31 (Min/Max 31/31)

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

/dev/sdb (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.79+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               QEMU
Product:              QEMU HARDDISK
Revision:             2.5+
Compliance:           SPC-3
User Capacity:        34,359,738,368 bytes [34.3 GB]
Logical block size:   512 bytes
LU is thin provisioned, LBPRZ=0
Device type:          disk
Local Time is:        Tue Feb 28 15:29:15 2023 PST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging

debug finished in 2 seconds for smartctl output


