+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1651508791                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1651508791                          +
+--------------------------------------------------------------------------------+
● smartmontools.service - Self Monitoring and Reporting Technology (SMART) Daemon
     Loaded: loaded (/lib/systemd/system/smartmontools.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2022-05-02 09:14:35 PDT; 11min ago
       Docs: man:smartd(8)
             man:smartd.conf(5)
   Main PID: 3211 (smartd)
     Status: "Next check of 1 device will start at 09:44:34"
      Tasks: 1 (limit: 57401)
     Memory: 1.6M
     CGroup: /system.slice/smartmontools.service
             └─3211 /usr/sbin/smartd -n --interval=1800

May 02 09:14:34 truenas.local smartd[3211]: Configuration file /etc/smartd.conf parsed.
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda, type changed from 'scsi' to 'sat'
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], opened
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], M4-CT256M4SSD2, S/N:00000000124109181449, WWN:5-00a075-109181449, FW:070H, 256 GB
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], found in smartd database: Crucial/Micron RealSSD m4/C400/P400
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.M4_CT256M4SSD2-00000000124109181449.ata.state
May 02 09:14:34 truenas.local smartd[3211]: Monitoring 1 ATA/SATA, 0 SCSI/SAS and 0 NVMe devices
May 02 09:14:34 truenas.local smartd[3211]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.M4_CT256M4SSD2-00000000124109181449.ata.state
May 02 09:14:35 truenas.local systemd[1]: Started Self Monitoring and Reporting Technology (SMART) Daemon.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1651508791                        +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1651508791                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                          smartctl output @1651508791                           +
+--------------------------------------------------------------------------------+
/dev/sda (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.93+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Crucial/Micron RealSSD m4/C400/P400
Device Model:     M4-CT256M4SSD2
Serial Number:    00000000124109181449
LU WWN Device Id: 5 00a075 109181449
Firmware Version: 070H
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon May  2 09:26:31 2022 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 1000) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  19) minutes.
Conveyance self-test routine
recommended polling time: 	 (   3) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       8608
 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       2994
170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0
173 Wear_Leveling_Count     0x0033   096   096   010    Pre-fail  Always       -       147
174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       143
181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       1542 421 1120
183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       87
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       116
196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       1
202 Perc_Rated_Life_Used    0x0018   096   096   001    Old_age   Offline      -       4
206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Vendor (0xff)       Completed without error       00%      8608         -
# 2  Vendor (0xff)       Completed without error       00%      8607         -
# 3  Vendor (0xff)       Completed without error       00%      8439         -
# 4  Vendor (0xff)       Completed without error       00%      8426         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

debug finished in 0 seconds for smartctl output


