+--------------------------------------------------------------------------------+
+                               SMART @1477117976                                +
+--------------------------------------------------------------------------------+
/dev/ada6
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T3798899
LU WWN Device Id: 5 0014ee 603666ef4
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(40380) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 405) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x70bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    100
  3 Spin_Up_Time            POS--K   180   179   021    -    5966
  4 Start_Stop_Count        -O--CK   098   098   000    -    2241
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2692
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   098   098   000    -    2060
192 Power-Off_Retract_Count -O--CK   200   200   000    -    16
193 Load_Cycle_Count        -O--CK   200   200   000    -    2224
194 Temperature_Celsius     -O---K   115   105   000    -    35
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    1
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 86 (device log contains only the most recent 24 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 86 [13] occurred at disk power-on lifetime: 1950 hours (81 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 28 f0 40 00  Error: UNC at LBA = 0x817228f0 = 2171742448

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 b0 00 00 81 72 28 00 40 08  9d+17:08:28.871  READ FPDMA QUEUED
  60 01 00 00 a8 00 00 81 72 27 00 40 08  9d+17:08:28.869  READ FPDMA QUEUED
  60 01 00 00 a0 00 00 81 72 26 00 40 08  9d+17:08:28.868  READ FPDMA QUEUED
  60 01 00 00 98 00 00 81 72 25 00 40 08  9d+17:08:28.867  READ FPDMA QUEUED
  60 01 00 00 90 00 00 81 72 24 00 40 08  9d+17:08:28.866  READ FPDMA QUEUED

Error 85 [12] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 4c 88 40 00  Error: UNC at LBA = 0x81724c88 = 2171751560

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 80 00 00 8f 34 3c 00 40 08  7d+00:04:29.221  READ FPDMA QUEUED
  60 01 00 00 78 00 00 81 72 4c 00 40 08  7d+00:04:29.221  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:29.218  READ LOG EXT
  60 01 00 00 68 00 00 8f 34 3c 00 40 08  7d+00:04:26.291  READ FPDMA QUEUED
  60 01 00 00 60 00 00 81 72 4c 00 40 08  7d+00:04:26.291  READ FPDMA QUEUED

Error 84 [11] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 4c 88 40 00  Error: UNC at LBA = 0x81724c88 = 2171751560

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 68 00 00 8f 34 3c 00 40 08  7d+00:04:26.291  READ FPDMA QUEUED
  60 01 00 00 60 00 00 81 72 4c 00 40 08  7d+00:04:26.291  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:26.287  READ LOG EXT
  60 01 00 00 50 00 00 8f 34 3c 00 40 08  7d+00:04:23.360  READ FPDMA QUEUED
  60 01 00 00 48 00 00 81 72 4c 00 40 08  7d+00:04:23.360  READ FPDMA QUEUED

Error 83 [10] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 4c 88 40 00  Error: UNC at LBA = 0x81724c88 = 2171751560

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 50 00 00 8f 34 3c 00 40 08  7d+00:04:23.360  READ FPDMA QUEUED
  60 01 00 00 48 00 00 81 72 4c 00 40 08  7d+00:04:23.360  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:23.357  READ LOG EXT
  60 01 00 00 38 00 00 8f 34 3c 00 40 08  7d+00:04:20.444  READ FPDMA QUEUED
  60 01 00 00 30 00 00 81 72 4c 00 40 08  7d+00:04:20.432  READ FPDMA QUEUED

Error 82 [9] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 4c 88 40 00  Error: UNC at LBA = 0x81724c88 = 2171751560

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 38 00 00 8f 34 3c 00 40 08  7d+00:04:20.444  READ FPDMA QUEUED
  60 01 00 00 30 00 00 81 72 4c 00 40 08  7d+00:04:20.432  READ FPDMA QUEUED
  60 01 00 00 28 00 00 8f 34 3b 00 40 08  7d+00:04:20.420  READ FPDMA QUEUED
  60 01 00 00 20 00 00 81 72 4b 00 40 08  7d+00:04:20.408  READ FPDMA QUEUED
  60 01 00 00 18 00 00 8f 34 3a 00 40 08  7d+00:04:20.397  READ FPDMA QUEUED

Error 81 [8] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 1d 80 40 00  Error: UNC at LBA = 0x81721d80 = 2171739520

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 78 00 00 8f 34 03 00 40 08  7d+00:04:15.635  READ FPDMA QUEUED
  60 00 08 00 70 00 00 81 72 1d 80 40 08  7d+00:04:15.635  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:15.631  READ LOG EXT
  60 01 00 00 60 00 00 8f 34 03 00 40 08  7d+00:04:12.716  READ FPDMA QUEUED
  60 01 00 00 58 00 00 8f 34 02 00 40 08  7d+00:04:12.693  READ FPDMA QUEUED

Error 80 [7] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 1d 80 40 00  Error: UNC at LBA = 0x81721d80 = 2171739520

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 60 00 00 8f 34 03 00 40 08  7d+00:04:12.716  READ FPDMA QUEUED
  60 01 00 00 58 00 00 8f 34 02 00 40 08  7d+00:04:12.693  READ FPDMA QUEUED
  60 00 08 00 50 00 00 81 72 1d 80 40 08  7d+00:04:12.693  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:12.690  READ LOG EXT
  60 01 00 00 40 00 00 8f 34 02 00 40 08  7d+00:04:09.775  READ FPDMA QUEUED

Error 79 [6] occurred at disk power-on lifetime: 1885 hours (78 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 81 72 1d 80 40 00  Error: UNC at LBA = 0x81721d80 = 2171739520

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 40 00 00 8f 34 02 00 40 08  7d+00:04:09.775  READ FPDMA QUEUED
  60 01 00 00 38 00 00 8f 34 01 00 40 08  7d+00:04:09.762  READ FPDMA QUEUED
  60 01 00 00 30 00 00 8f 34 00 00 40 08  7d+00:04:09.741  READ FPDMA QUEUED
  60 00 08 00 28 00 00 81 72 1d 80 40 08  7d+00:04:09.741  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  7d+00:04:09.737  READ LOG EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2685         -
# 2  Short offline       Completed: read failure       10%      2607         2171748640
# 3  Short offline       Completed: read failure       10%      2439         2171748640
# 4  Extended offline    Completed: read failure       60%      2344         2171748640
# 5  Extended offline    Completed: read failure       60%      2032         2171748640
# 6  Extended offline    Completed without error       00%      1818         -
# 7  Conveyance offline  Completed without error       00%      1809         -
# 8  Short offline       Completed without error       00%      1809         -
4 of 4 failed self-tests are outdated by newer successful extended offline self-test # 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    35 Celsius
Power Cycle Min/Max Temperature:     21/42 Celsius
Lifetime    Min/Max Temperature:     19/45 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (113)

Index    Estimated Time   Temperature Celsius
 114    2016-10-22 08:35    35  ****************
 ...    ..( 98 skipped).    ..  ****************
 213    2016-10-22 10:14    35  ****************
 214    2016-10-22 10:15    34  ***************
 ...    ..( 24 skipped).    ..  ***************
 239    2016-10-22 10:40    34  ***************
 240    2016-10-22 10:41    35  ****************
 ...    ..( 24 skipped).    ..  ****************
 265    2016-10-22 11:06    35  ****************
 266    2016-10-22 11:07    34  ***************
 ...    ..( 18 skipped).    ..  ***************
 285    2016-10-22 11:26    34  ***************
 286    2016-10-22 11:27    33  **************
 ...    ..( 10 skipped).    ..  **************
 297    2016-10-22 11:38    33  **************
 298    2016-10-22 11:39    32  *************
 ...    ..( 17 skipped).    ..  *************
 316    2016-10-22 11:57    32  *************
 317    2016-10-22 11:58    33  **************
 ...    ..( 31 skipped).    ..  **************
 349    2016-10-22 12:30    33  **************
 350    2016-10-22 12:31    34  ***************
 ...    ..( 36 skipped).    ..  ***************
 387    2016-10-22 13:08    34  ***************
 388    2016-10-22 13:09    35  ****************
 ...    ..(  9 skipped).    ..  ****************
 398    2016-10-22 13:19    35  ****************
 399    2016-10-22 13:20    34  ***************
 ...    ..( 32 skipped).    ..  ***************
 432    2016-10-22 13:53    34  ***************
 433    2016-10-22 13:54    35  ****************
 ...    ..( 46 skipped).    ..  ****************
   2    2016-10-22 14:41    35  ****************
   3    2016-10-22 14:42    34  ***************
 ...    ..( 20 skipped).    ..  ***************
  24    2016-10-22 15:03    34  ***************
  25    2016-10-22 15:04    35  ****************
 ...    ..( 61 skipped).    ..  ****************
  87    2016-10-22 16:06    35  ****************
  88    2016-10-22 16:07    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  91    2016-10-22 16:10    34  ***************
  92    2016-10-22 16:11    35  ****************
  93    2016-10-22 16:12    34  ***************
  94    2016-10-22 16:13    35  ****************
 ...    ..( 18 skipped).    ..  ****************
 113    2016-10-22 16:32    35  ****************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619494  Vendor specific

/dev/ada5
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T3796164
LU WWN Device Id: 5 0014ee 6ae10fda2
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(39060) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 392) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x70bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   180   178   021    -    5958
  4 Start_Stop_Count        -O--CK   098   098   000    -    2241
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2694
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   098   098   000    -    2060
192 Power-Off_Retract_Count -O--CK   200   200   000    -    16
193 Load_Cycle_Count        -O--CK   200   200   000    -    2224
194 Temperature_Celsius     -O---K   117   103   000    -    33
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2687         -
# 2  Short offline       Completed without error       00%      2608         -
# 3  Short offline       Completed without error       00%      2440         -
# 4  Extended offline    Completed without error       00%      2351         -
# 5  Extended offline    Completed without error       00%      2039         -
# 6  Extended offline    Completed without error       00%      1819         -
# 7  Conveyance offline  Completed without error       00%      1811         -
# 8  Short offline       Completed without error       00%      1811         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     21/45 Celsius
Lifetime    Min/Max Temperature:     19/47 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (153)

Index    Estimated Time   Temperature Celsius
 154    2016-10-22 08:35    34  ***************
 ...    ..(  7 skipped).    ..  ***************
 162    2016-10-22 08:43    34  ***************
 163    2016-10-22 08:44    33  **************
 164    2016-10-22 08:45    34  ***************
 ...    ..(  3 skipped).    ..  ***************
 168    2016-10-22 08:49    34  ***************
 169    2016-10-22 08:50    33  **************
 ...    ..(  2 skipped).    ..  **************
 172    2016-10-22 08:53    33  **************
 173    2016-10-22 08:54    34  ***************
 ...    ..(  6 skipped).    ..  ***************
 180    2016-10-22 09:01    34  ***************
 181    2016-10-22 09:02    33  **************
 182    2016-10-22 09:03    34  ***************
 ...    ..(  7 skipped).    ..  ***************
 190    2016-10-22 09:11    34  ***************
 191    2016-10-22 09:12    33  **************
 192    2016-10-22 09:13    34  ***************
 ...    ..( 44 skipped).    ..  ***************
 237    2016-10-22 09:58    34  ***************
 238    2016-10-22 09:59    33  **************
 ...    ..( 69 skipped).    ..  **************
 308    2016-10-22 11:09    33  **************
 309    2016-10-22 11:10    32  *************
 ...    ..( 86 skipped).    ..  *************
 396    2016-10-22 12:37    32  *************
 397    2016-10-22 12:38    33  **************
 ...    ..( 95 skipped).    ..  **************
  15    2016-10-22 14:14    33  **************
  16    2016-10-22 14:15    34  ***************
 ...    ..( 20 skipped).    ..  ***************
  37    2016-10-22 14:36    34  ***************
  38    2016-10-22 14:37    33  **************
 ...    ..(106 skipped).    ..  **************
 145    2016-10-22 16:24    33  **************
 146    2016-10-22 16:25    34  ***************
 ...    ..(  4 skipped).    ..  ***************
 151    2016-10-22 16:30    34  ***************
 152    2016-10-22 16:31    33  **************
 153    2016-10-22 16:32    33  **************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619478  Vendor specific

/dev/ada4
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T3860035
LU WWN Device Id: 5 0014ee 658bc10f1
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(38760) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 389) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x70bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   198   182   051    -    9293
  3 Spin_Up_Time            POS--K   182   180   021    -    5866
  4 Start_Stop_Count        -O--CK   098   098   000    -    2242
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2699
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   098   098   000    -    2061
192 Power-Off_Retract_Count -O--CK   200   200   000    -    17
193 Load_Cycle_Count        -O--CK   200   200   000    -    2224
194 Temperature_Celsius     -O---K   118   104   000    -    32
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 9293 (device log contains only the most recent 24 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 9293 [4] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 e8 00 01 5d 50 66 e0 40 08  3d+19:51:14.663  READ FPDMA QUEUED
  60 01 00 00 e0 00 01 5d 50 9e 00 40 08  3d+19:51:14.663  READ FPDMA QUEUED
  60 01 00 00 d8 00 00 00 90 3e e0 40 08  3d+19:51:14.663  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:14.583  READ LOG EXT
  60 01 00 00 c8 00 01 5d 50 66 e0 40 08  3d+19:51:14.405  READ FPDMA QUEUED

Error 9292 [3] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 c8 00 01 5d 50 66 e0 40 08  3d+19:51:14.405  READ FPDMA QUEUED
  60 01 00 00 c0 00 01 5d 50 9e 00 40 08  3d+19:51:14.405  READ FPDMA QUEUED
  60 01 00 00 b8 00 00 00 90 3e e0 40 08  3d+19:51:14.405  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:14.328  READ LOG EXT
  60 01 00 00 a8 00 01 5d 50 66 e0 40 08  3d+19:51:14.155  READ FPDMA QUEUED

Error 9291 [2] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 a8 00 01 5d 50 66 e0 40 08  3d+19:51:14.155  READ FPDMA QUEUED
  60 01 00 00 a0 00 00 00 90 41 e0 40 08  3d+19:51:14.154  READ FPDMA QUEUED
  60 01 00 00 98 00 00 00 90 40 e0 40 08  3d+19:51:14.149  READ FPDMA QUEUED
  60 01 00 00 90 00 01 5d 50 9e 00 40 08  3d+19:51:14.148  READ FPDMA QUEUED
  60 01 00 00 88 00 00 00 90 3e e0 40 08  3d+19:51:14.148  READ FPDMA QUEUED

Error 9290 [1] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 78 00 00 00 90 40 e0 40 08  3d+19:51:13.920  READ FPDMA QUEUED
  60 01 00 00 70 00 01 5d 50 9e 00 40 08  3d+19:51:13.920  READ FPDMA QUEUED
  60 01 00 00 68 00 00 00 90 3e e0 40 08  3d+19:51:13.920  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:13.839  READ LOG EXT
  60 01 00 00 58 00 00 00 90 40 e0 40 08  3d+19:51:13.692  READ FPDMA QUEUED

Error 9289 [0] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 58 00 00 00 90 40 e0 40 08  3d+19:51:13.692  READ FPDMA QUEUED
  60 01 00 00 50 00 01 5d 50 9e 00 40 08  3d+19:51:13.692  READ FPDMA QUEUED
  60 01 00 00 48 00 00 00 90 3e e0 40 08  3d+19:51:13.692  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:13.606  READ LOG EXT
  60 01 00 00 38 00 01 5d 50 9e 00 40 08  3d+19:51:13.435  READ FPDMA QUEUED

Error 9288 [23] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 38 00 01 5d 50 9e 00 40 08  3d+19:51:13.435  READ FPDMA QUEUED
  60 01 00 00 30 00 00 00 90 3e e0 40 08  3d+19:51:13.435  READ FPDMA QUEUED
  60 01 00 00 28 00 00 00 90 3e e0 40 08  3d+19:51:13.435  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:13.362  READ LOG EXT
  60 01 00 00 18 00 01 5d 50 9e 00 40 08  3d+19:51:13.192  READ FPDMA QUEUED

Error 9287 [22] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 18 00 01 5d 50 9e 00 40 08  3d+19:51:13.192  READ FPDMA QUEUED
  60 01 00 00 10 00 00 00 90 3e e0 40 08  3d+19:51:13.192  READ FPDMA QUEUED
  60 01 00 00 08 00 00 00 90 3e e0 40 08  3d+19:51:13.192  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:13.107  READ LOG EXT
  60 01 00 00 f8 00 01 5d 50 9e 00 40 08  3d+19:51:12.935  READ FPDMA QUEUED

Error 9286 [21] occurred at disk power-on lifetime: 1815 hours (75 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 90 3e ea 40 00  Error: UNC at LBA = 0x00903eea = 9453290

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 f8 00 01 5d 50 9e 00 40 08  3d+19:51:12.935  READ FPDMA QUEUED
  60 01 00 00 f0 00 00 00 90 3e e0 40 08  3d+19:51:12.935  READ FPDMA QUEUED
  60 01 00 00 e8 00 00 00 90 3e e0 40 08  3d+19:51:12.935  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 40 08  3d+19:51:12.862  READ LOG EXT
  60 01 00 00 d8 00 01 5d 50 9e 00 40 08  3d+19:51:12.693  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2691         -
# 2  Short offline       Completed without error       00%      2613         -
# 3  Short offline       Completed without error       00%      2445         -
# 4  Extended offline    Completed without error       00%      2355         -
# 5  Extended offline    Completed without error       00%      2043         -
# 6  Extended offline    Completed without error       00%      1862         -
# 7  Extended offline    Aborted by host               90%      1855         -
# 8  Short offline       Completed without error       00%      1855         -
# 9  Extended offline    Completed without error       00%      1849         -
#10  Short offline       Completed without error       00%      1842         -
#11  Extended offline    Completed without error       00%      1824         -
#12  Conveyance offline  Completed without error       00%      1816         -
#13  Short offline       Completed without error       00%      1816         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    32 Celsius
Power Cycle Min/Max Temperature:     21/43 Celsius
Lifetime    Min/Max Temperature:     19/46 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (120)

Index    Estimated Time   Temperature Celsius
 121    2016-10-22 08:35    32  *************
 ...    ..( 98 skipped).    ..  *************
 220    2016-10-22 10:14    32  *************
 221    2016-10-22 10:15    31  ************
 ...    ..( 55 skipped).    ..  ************
 277    2016-10-22 11:11    31  ************
 278    2016-10-22 11:12    30  ***********
 ...    ..( 19 skipped).    ..  ***********
 298    2016-10-22 11:32    30  ***********
 299    2016-10-22 11:33    29  **********
 ...    ..( 14 skipped).    ..  **********
 314    2016-10-22 11:48    29  **********
 315    2016-10-22 11:49    30  ***********
 ...    ..( 16 skipped).    ..  ***********
 332    2016-10-22 12:06    30  ***********
 333    2016-10-22 12:07    31  ************
 ...    ..(119 skipped).    ..  ************
 453    2016-10-22 14:07    31  ************
 454    2016-10-22 14:08    32  *************
 ...    ..(143 skipped).    ..  *************
 120    2016-10-22 16:32    32  *************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619484  Vendor specific

/dev/ada3
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N4TKRL47
LU WWN Device Id: 5 0014ee 20d6d82d3
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(39120) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 393) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   181   179   021    -    5941
  4 Start_Stop_Count        -O--CK   100   100   000    -    16
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   098   098   000    -    1835
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    14
192 Power-Off_Retract_Count -O--CK   200   200   000    -    7
193 Load_Cycle_Count        -O--CK   200   200   000    -    1142
194 Temperature_Celsius     -O---K   116   108   000    -    34
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1827         -
# 2  Short offline       Completed without error       00%      1749         -
# 3  Short offline       Completed without error       00%      1581         -
# 4  Extended offline    Completed without error       00%      1492         -
# 5  Extended offline    Completed without error       00%      1180         -
# 6  Extended offline    Completed without error       00%       961         -
# 7  Conveyance offline  Completed without error       00%       953         -
# 8  Short offline       Completed without error       00%       953         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     22/39 Celsius
Lifetime    Min/Max Temperature:     20/42 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (126)

Index    Estimated Time   Temperature Celsius
 127    2016-10-22 08:35    34  ***************
 ...    ..( 48 skipped).    ..  ***************
 176    2016-10-22 09:24    34  ***************
 177    2016-10-22 09:25    33  **************
 ...    ..( 32 skipped).    ..  **************
 210    2016-10-22 09:58    33  **************
 211    2016-10-22 09:59    34  ***************
 ...    ..(  6 skipped).    ..  ***************
 218    2016-10-22 10:06    34  ***************
 219    2016-10-22 10:07    35  ****************
 ...    ..(  2 skipped).    ..  ****************
 222    2016-10-22 10:10    35  ****************
 223    2016-10-22 10:11    34  ***************
 ...    ..(  3 skipped).    ..  ***************
 227    2016-10-22 10:15    34  ***************
 228    2016-10-22 10:16    33  **************
 ...    ..( 11 skipped).    ..  **************
 240    2016-10-22 10:28    33  **************
 241    2016-10-22 10:29    32  *************
 ...    ..( 53 skipped).    ..  *************
 295    2016-10-22 11:23    32  *************
 296    2016-10-22 11:24    33  **************
 ...    ..( 27 skipped).    ..  **************
 324    2016-10-22 11:52    33  **************
 325    2016-10-22 11:53    34  ***************
 ...    ..( 97 skipped).    ..  ***************
 423    2016-10-22 13:31    34  ***************
 424    2016-10-22 13:32    35  ****************
 425    2016-10-22 13:33    35  ****************
 426    2016-10-22 13:34    34  ***************
 ...    ..(177 skipped).    ..  ***************
 126    2016-10-22 16:32    34  ***************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619483  Vendor specific

/dev/ada2
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N2KVS36D
LU WWN Device Id: 5 0014ee 20dab48ce
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(40560) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 407) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    9
  3 Spin_Up_Time            POS--K   180   178   021    -    5975
  4 Start_Stop_Count        -O--CK   100   100   000    -    15
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   099   099   000    -    974
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    13
192 Power-Off_Retract_Count -O--CK   200   200   000    -    5
193 Load_Cycle_Count        -O--CK   200   200   000    -    304
194 Temperature_Celsius     -O---K   117   110   000    -    33
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 1
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 [0] occurred at disk power-on lifetime: 202 hours (8 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 18 cc 88 48 40 00  Error: UNC at LBA = 0x118cc8848 = 4711024712

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 01 00 00 b0 00 01 18 cc 88 00 40 08  4d+15:00:35.204  READ FPDMA QUEUED
  60 01 00 00 a8 00 01 18 cc 87 00 40 08  4d+15:00:35.202  READ FPDMA QUEUED
  60 01 00 00 a0 00 01 18 cc 86 00 40 08  4d+15:00:35.200  READ FPDMA QUEUED
  60 01 00 00 98 00 01 18 cc 85 00 40 08  4d+15:00:35.199  READ FPDMA QUEUED
  60 01 00 00 90 00 01 18 cc 84 00 40 08  4d+15:00:35.197  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       967         -
# 2  Short offline       Completed without error       00%       889         -
# 3  Short offline       Completed without error       00%       721         -
# 4  Extended offline    Completed without error       00%       631         -
# 5  Extended offline    Completed without error       00%       320         -
# 6  Extended offline    Completed without error       00%       101         -
# 7  Conveyance offline  Completed without error       00%        93         -
# 8  Short offline       Completed without error       00%        92         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     22/40 Celsius
Lifetime    Min/Max Temperature:     20/40 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (170)

Index    Estimated Time   Temperature Celsius
 171    2016-10-22 08:35    32  *************
 ...    ..( 26 skipped).    ..  *************
 198    2016-10-22 09:02    32  *************
 199    2016-10-22 09:03    33  **************
 ...    ..( 28 skipped).    ..  **************
 228    2016-10-22 09:32    33  **************
 229    2016-10-22 09:33    32  *************
 230    2016-10-22 09:34    33  **************
 231    2016-10-22 09:35    33  **************
 232    2016-10-22 09:36    33  **************
 233    2016-10-22 09:37    34  ***************
 ...    ..(  2 skipped).    ..  ***************
 236    2016-10-22 09:40    34  ***************
 237    2016-10-22 09:41    33  **************
 238    2016-10-22 09:42    33  **************
 239    2016-10-22 09:43    33  **************
 240    2016-10-22 09:44    32  *************
 ...    ..( 70 skipped).    ..  *************
 311    2016-10-22 10:55    32  *************
 312    2016-10-22 10:56    33  **************
 ...    ..( 93 skipped).    ..  **************
 406    2016-10-22 12:30    33  **************
 407    2016-10-22 12:31    34  ***************
 ...    ..( 15 skipped).    ..  ***************
 423    2016-10-22 12:47    34  ***************
 424    2016-10-22 12:48    33  **************
 ...    ..(142 skipped).    ..  **************
  89    2016-10-22 15:11    33  **************
  90    2016-10-22 15:12    34  ***************
 ...    ..( 27 skipped).    ..  ***************
 118    2016-10-22 15:40    34  ***************
 119    2016-10-22 15:41    33  **************
 ...    ..( 50 skipped).    ..  **************
 170    2016-10-22 16:32    33  **************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619462  Vendor specific

/dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68EUZN0
Serial Number:    WD-WCC4N6FEUPEX
LU WWN Device Id: 5 0014ee 262ddd82f
Firmware Version: 82.00A82
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(38100) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 382) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   178   176   021    -    6091
  4 Start_Stop_Count        -O--CK   100   100   000    -    12
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   099   099   000    -    885
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    10
192 Power-Off_Retract_Count -O--CK   200   200   000    -    3
193 Load_Cycle_Count        -O--CK   200   200   000    -    222
194 Temperature_Celsius     -O---K   117   110   000    -    33
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       878         -
# 2  Short offline       Completed without error       00%       800         -
# 3  Short offline       Completed without error       00%       632         -
# 4  Extended offline    Completed without error       00%       542         -
# 5  Extended offline    Completed without error       00%       231         -
# 6  Extended offline    Completed without error       00%        12         -
# 7  Conveyance offline  Completed without error       00%         4         -
# 8  Short offline       Completed without error       00%         3         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     22/40 Celsius
Lifetime    Min/Max Temperature:      2/40 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (94)

Index    Estimated Time   Temperature Celsius
  95    2016-10-22 08:35    33  **************
 ...    ..( 27 skipped).    ..  **************
 123    2016-10-22 09:03    33  **************
 124    2016-10-22 09:04    34  ***************
 ...    ..(  5 skipped).    ..  ***************
 130    2016-10-22 09:10    34  ***************
 131    2016-10-22 09:11    33  **************
 ...    ..(  4 skipped).    ..  **************
 136    2016-10-22 09:16    33  **************
 137    2016-10-22 09:17    32  *************
 ...    ..( 35 skipped).    ..  *************
 173    2016-10-22 09:53    32  *************
 174    2016-10-22 09:54    31  ************
 ...    ..( 28 skipped).    ..  ************
 203    2016-10-22 10:23    31  ************
 204    2016-10-22 10:24    32  *************
 ...    ..( 27 skipped).    ..  *************
 232    2016-10-22 10:52    32  *************
 233    2016-10-22 10:53    33  **************
 ...    ..( 31 skipped).    ..  **************
 265    2016-10-22 11:25    33  **************
 266    2016-10-22 11:26    34  ***************
 ...    ..( 17 skipped).    ..  ***************
 284    2016-10-22 11:44    34  ***************
 285    2016-10-22 11:45    33  **************
 ...    ..( 43 skipped).    ..  **************
 329    2016-10-22 12:29    33  **************
 330    2016-10-22 12:30    34  ***************
 ...    ..( 41 skipped).    ..  ***************
 372    2016-10-22 13:12    34  ***************
 373    2016-10-22 13:13    33  **************
 374    2016-10-22 13:14    33  **************
 375    2016-10-22 13:15    33  **************
 376    2016-10-22 13:16    34  ***************
 ...    ..( 26 skipped).    ..  ***************
 403    2016-10-22 13:43    34  ***************
 404    2016-10-22 13:44    33  **************
 ...    ..( 17 skipped).    ..  **************
 422    2016-10-22 14:02    33  **************
 423    2016-10-22 14:03    34  ***************
 ...    ..(  8 skipped).    ..  ***************
 432    2016-10-22 14:12    34  ***************
 433    2016-10-22 14:13    33  **************
 ...    ..( 30 skipped).    ..  **************
 464    2016-10-22 14:44    33  **************
 465    2016-10-22 14:45    34  ***************
 ...    ..(106 skipped).    ..  ***************
  94    2016-10-22 16:32    34  ***************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4      1619450  Vendor specific

/dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON SUV400S37120G
Serial Number:    50026B72640360A4
LU WWN Device Id: 0 550380 440010000
Firmware Version: 0C3FD6SD
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 22 16:32:56 2016 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    5) seconds.
Offline data collection
capabilities: 			 (0x71) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (   5) minutes.
Conveyance self-test routine
recommended polling time: 	 (   0) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   000    -    0
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    915
 12 Power_Cycle_Count       -O--CK   100   100   000    -    9
100 Unknown_Attribute       -O--CK   100   100   000    -    11216
101 Unknown_Attribute       -O--CK   100   100   000    -    22080
170 Unknown_Attribute       -O--CK   100   100   000    -    0
171 Unknown_Attribute       -O--CK   100   100   000    -    0
172 Unknown_Attribute       -O--CK   100   100   000    -    0
174 Unknown_Attribute       -O--CK   100   100   000    -    7
175 Program_Fail_Count_Chip -O--CK   100   100   000    -    0
176 Erase_Fail_Count_Chip   -O--CK   100   100   000    -    0
177 Wear_Leveling_Count     -O--CK   100   100   000    -    6
178 Used_Rsvd_Blk_Cnt_Chip  -O----   100   100   000    -    0
180 Unused_Rsvd_Blk_Cnt_Tot -O----   100   100   000    -    586
183 Runtime_Bad_Block       -O--CK   100   100   000    -    1
187 Reported_Uncorrect      PO--CK   100   100   000    -    0
194 Temperature_Celsius     -O---K   033   100   000    -    33 (Min/Max 22/34)
195 Hardware_ECC_Recovered  -O--CK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O--C-   100   100   000    -    0
201 Unknown_SSD_Attribute   -O--CK   100   100   000    -    0
204 Soft_ECC_Correction     -O--CK   100   100   000    -    0
231 Temperature_Celsius     -O--CK   100   100   000    -    0
233 Media_Wearout_Indicator -O--CK   100   100   000    -    15
234 Unknown_Attribute       -O--CK   100   100   000    -    8
241 Total_LBAs_Written      -O--CK   100   100   000    -    12
242 Total_LBAs_Read         -O--CK   100   100   000    -    4
250 Read_Error_Retry_Rate   -O--CK   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL,SL  R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x0a       GPL     R/W      5  Device Statistics Notification
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL     R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1           SL  VS       9  Device vendor specific log
0xab           SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 0 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     22/34 Celsius
Lifetime    Min/Max Temperature:     22/34 Celsius
Under/Over Temperature Limit Count:   0/0
SMART Status:                        0xc24f (PASSED)

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/85 Celsius
Temperature History Size (Index):    478 (461)

Index    Estimated Time   Temperature Celsius
 462    2016-10-22 08:35    31  ************
 ...    ..( 96 skipped).    ..  ************
  81    2016-10-22 10:12    31  ************
  82    2016-10-22 10:13    32  *************
 ...    ..( 44 skipped).    ..  *************
 127    2016-10-22 10:58    32  *************
 128    2016-10-22 10:59    33  **************
 129    2016-10-22 11:00    32  *************
 130    2016-10-22 11:01    33  **************
 ...    ..(330 skipped).    ..  **************
 461    2016-10-22 16:32    33  **************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               9  ---  Lifetime Power-On Resets
0x01  0x010  4             915  ---  Power-on Hours
0x01  0x018  6        26700692  ---  Logical Sectors Written
0x01  0x020  6          173697  ---  Number of Write Commands
0x01  0x028  6         9924587  ---  Logical Sectors Read
0x01  0x030  6          200863  ---  Number of Read Commands
0x01  0x038  6      3296961490  ---  Date and Time TimeStamp
0x02  =====  =               =  ===  == Free-Fall Statistics (empty) ==
0x03  =====  =               =  ===  == Rotating Media Statistics (empty) ==
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4              90  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              33  -D-  Current Temperature
0x05  0x010  1               -  -D-  Average Short Term Temperature
0x05  0x018  1               0  -D-  Average Long Term Temperature
0x05  0x020  1              34  ---  Highest Temperature
0x05  0x028  1              22  ---  Lowest Temperature
0x05  0x030  1              31  -D-  Highest Average Short Term Temperature
0x05  0x038  1              23  -D-  Lowest Average Short Term Temperature
0x05  0x040  1               -  -D-  Highest Average Long Term Temperature
0x05  0x048  1               -  -D-  Lowest Average Long Term Temperature
0x05  0x050  4               0  -D-  Time in Over-Temperature
0x05  0x058  1              70  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  -D-  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4              90  ---  Number of Hardware Resets
0x06  0x018  4               0  ---  Number of Interface CRC Errors
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               0  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x000a  4           11  Device-to-host register FISes sent due to a COMRESET

debug finished in 0 seconds for SMART


