+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel 730 and DC S3500/S3700 Series SSDs
Device Model:     INTEL SSDSC2BA200G3
Serial Number:    BTTV4236030Z200GGN
LU WWN Device Id: 5 5cd2e4 04b66284a
Firmware Version: 5DV10270
User Capacity:    200,049,647,616 bytes [200 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun 12 22:29:10 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    2) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   2) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    4410
 12 Power_Cycle_Count       -O--CK   100   100   000    -    22
170 Available_Reservd_Space PO--CK   100   100   010    -    0
171 Program_Fail_Count      -O--CK   100   100   000    -    0
172 Erase_Fail_Count        -O--CK   100   100   000    -    0
174 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    13
175 Power_Loss_Cap_Test     PO--CK   100   100   010    -    637 (22 1261)
183 SATA_Downshift_Count    -O--CK   100   100   000    -    0
184 End-to-End_Error        PO--CK   100   100   090    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
190 Temperature_Case        -O---K   068   065   000    -    32 (Min/Max 29/41)
192 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    13
194 Temperature_Internal    -O---K   100   100   000    -    41
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
199 CRC_Error_Count         -OSRCK   100   100   000    -    0
225 Host_Writes_32MiB       -O--CK   100   100   000    -    216696
226 Workld_Media_Wear_Indic -O--CK   100   100   000    -    81
227 Workld_Host_Reads_Perc  -O--CK   100   100   000    -    81
228 Workload_Minutes        -O--CK   100   100   000    -    264516
232 Available_Reservd_Space PO--CK   100   100   010    -    0
233 Media_Wearout_Indicator -O--CK   100   100   000    -    0
234 Thermal_Throttle        -O--CK   100   100   000    -    0/0
241 Host_Writes_32MiB       -O--CK   100   100   000    -    216696
242 Host_Reads_32MiB        -O--CK   100   100   000    -    916500
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01       GPL,SL  R/O      1  Summary SMART error log
0x02       GPL,SL  R/O      8  Comprehensive SMART error log
0x03       GPL,SL  R/O     20  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06       GPL,SL  R/O      1  SMART self-test log
0x07       GPL,SL  R/O      2  Extended self-test log
0x09       GPL,SL  R/W      1  Selective self-test log
0x10       GPL,SL  R/O      1  NCQ Command Error log
0x11       GPL,SL  R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xb0       GPL,SL  VS       1  Device vendor specific log
0xb1       GPL,SL  VS      33  Device vendor specific log
0xdd       GPL,SL  VS       1  Device vendor specific log
0xde       GPL     VS     768  Device vendor specific log
0xdf       GPL     VS    1152  Device vendor specific log
0xdf       SL      VS     128  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (20 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4409         -
# 2  Short offline       Completed without error       00%      4408         -
# 3  Short offline       Completed without error       00%      4407         -
# 4  Short offline       Completed without error       00%      4406         -
# 5  Short offline       Completed without error       00%      4405         -
# 6  Short offline       Completed without error       00%      4404         -
# 7  Short offline       Completed without error       00%      4403         -
# 8  Short offline       Completed without error       00%      4402         -
# 9  Short offline       Completed without error       00%      4401         -
#10  Short offline       Completed without error       00%      4400         -
#11  Short offline       Completed without error       00%      4399         -
#12  Short offline       Completed without error       00%      4398         -
#13  Short offline       Completed without error       00%      4397         -
#14  Short offline       Completed without error       00%      4396         -
#15  Short offline       Completed without error       00%      4395         -
#16  Short offline       Completed without error       00%      4394         -
#17  Short offline       Completed without error       00%      4393         -
#18  Short offline       Completed without error       00%      4392         -
#19  Short offline       Completed without error       00%      4391         -
#20  Short offline       Completed without error       00%      4390         -
#21  Short offline       Completed without error       00%      4389         -
#22  Short offline       Completed without error       00%      4388         -
#23  Short offline       Completed without error       00%      4387         -
#24  Short offline       Completed without error       00%      4386         -
#25  Short offline       Completed without error       00%      4385         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        Active (0)
Current Temperature:                    32 Celsius
Power Cycle Min/Max Temperature:     29/41 Celsius
Lifetime    Min/Max Temperature:      1/44 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    478 (317)

Index    Estimated Time   Temperature Celsius
 318    2015-06-12 14:32    32  *************
 ...    ..(147 skipped).    ..  *************
 466    2015-06-12 17:00    32  *************
 467    2015-06-12 17:01    31  ************
 ...    ..( 16 skipped).    ..  ************
   6    2015-06-12 17:18    31  ************
   7    2015-06-12 17:19    32  *************
   8    2015-06-12 17:20    31  ************
 ...    ..( 36 skipped).    ..  ************
  45    2015-06-12 17:57    31  ************
  46    2015-06-12 17:58    32  *************
 ...    ..(138 skipped).    ..  *************
 185    2015-06-12 20:17    32  *************
 186    2015-06-12 20:18    33  **************
 187    2015-06-12 20:19    32  *************
 ...    ..( 10 skipped).    ..  *************
 198    2015-06-12 20:30    32  *************
 199    2015-06-12 20:31    31  ************
 ...    ..( 45 skipped).    ..  ************
 245    2015-06-12 21:17    31  ************
 246    2015-06-12 21:18    32  *************
 ...    ..(  5 skipped).    ..  *************
 252    2015-06-12 21:24    32  *************
 253    2015-06-12 21:25    31  ************
 254    2015-06-12 21:26    32  *************
 ...    ..( 51 skipped).    ..  *************
 306    2015-06-12 22:18    32  *************
 307    2015-06-12 22:19    33  **************
 308    2015-06-12 22:20    33  **************
 309    2015-06-12 22:21    33  **************
 310    2015-06-12 22:22    32  *************
 ...    ..(  6 skipped).    ..  *************
 317    2015-06-12 22:29    32  *************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  1  =====  =                =  == General Statistics (rev 2) ==
  1  0x008  4               22  Lifetime Power-On Resets
  1  0x018  6      14201429727  Logical Sectors Written
  1  0x020  6         80477175  Number of Write Commands
  1  0x028  6      60063805867  Logical Sectors Read
  1  0x030  6         67708288  Number of Read Commands
  4  =====  =                =  == General Errors Statistics (rev 1) ==
  4  0x008  4                0  Number of Reported Uncorrectable Errors
  4  0x010  4                0  Resets Between Cmd Acceptance and Completion
  5  =====  =                =  == Temperature Statistics (rev 1) ==
  5  0x008  1               32  Current Temperature
  5  0x010  1               31  Average Short Term Temperature
  5  0x018  1               30  Average Long Term Temperature
  5  0x020  1               42  Highest Temperature
  5  0x028  1               11  Lowest Temperature
  5  0x030  1               32  Highest Average Short Term Temperature
  5  0x038  1               22  Lowest Average Short Term Temperature
  5  0x040  1               30  Highest Average Long Term Temperature
  5  0x048  1               24  Lowest Average Long Term Temperature
  5  0x050  4                0  Time in Over-Temperature
  5  0x058  1               70  Specified Maximum Operating Temperature
  5  0x060  4                0  Time in Under-Temperature
  5  0x068  1                0  Specified Minimum Operating Temperature
  6  =====  =                =  == Transport Statistics (rev 1) ==
  6  0x008  4              316  Number of Hardware Resets
  6  0x010  4              240  Number of ASR Events
  6  0x018  4                0  Number of Interface CRC Errors
  7  =====  =                =  == Solid State Device Statistics (rev 1) ==
  7  0x008  1                0  Percentage Used Endurance Indicator

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x000a  4           34  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS

/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel 730 and DC S3500/S3700 Series SSDs
Device Model:     INTEL SSDSC2BA200G3
Serial Number:    BTTV42360405200GGN
LU WWN Device Id: 5 5cd2e4 04b662cae
Firmware Version: 5DV10270
User Capacity:    200,049,647,616 bytes [200 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun 12 22:29:10 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    2) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   2) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    4410
 12 Power_Cycle_Count       -O--CK   100   100   000    -    22
170 Available_Reservd_Space PO--CK   100   100   010    -    0
171 Program_Fail_Count      -O--CK   100   100   000    -    0
172 Erase_Fail_Count        -O--CK   100   100   000    -    0
174 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    12
175 Power_Loss_Cap_Test     PO--CK   100   100   010    -    647 (22 1252)
183 SATA_Downshift_Count    -O--CK   100   100   000    -    0
184 End-to-End_Error        PO--CK   100   100   090    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
190 Temperature_Case        -O---K   069   063   000    -    31 (Min/Max 28/39)
192 Unsafe_Shutdown_Count   -O--CK   100   100   000    -    12
194 Temperature_Internal    -O---K   100   100   000    -    40
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
199 CRC_Error_Count         -OSRCK   100   100   000    -    0
225 Host_Writes_32MiB       -O--CK   100   100   000    -    603637
226 Workld_Media_Wear_Indic -O--CK   100   100   000    -    245
227 Workld_Host_Reads_Perc  -O--CK   100   100   000    -    60
228 Workload_Minutes        -O--CK   100   100   000    -    264494
232 Available_Reservd_Space PO--CK   100   100   010    -    0
233 Media_Wearout_Indicator -O--CK   100   100   000    -    0
234 Thermal_Throttle        -O--CK   100   100   000    -    0/0
241 Host_Writes_32MiB       -O--CK   100   100   000    -    603637
242 Host_Reads_32MiB        -O--CK   100   100   000    -    910548
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01       GPL,SL  R/O      1  Summary SMART error log
0x02       GPL,SL  R/O      8  Comprehensive SMART error log
0x03       GPL,SL  R/O     20  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06       GPL,SL  R/O      1  SMART self-test log
0x07       GPL,SL  R/O      2  Extended self-test log
0x09       GPL,SL  R/W      1  Selective self-test log
0x10       GPL,SL  R/O      1  NCQ Command Error log
0x11       GPL,SL  R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xb0       GPL,SL  VS       1  Device vendor specific log
0xb1       GPL,SL  VS      33  Device vendor specific log
0xdd       GPL,SL  VS       1  Device vendor specific log
0xde       GPL     VS     768  Device vendor specific log
0xdf       GPL     VS    1152  Device vendor specific log
0xdf       SL      VS     128  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (20 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4408         -
# 2  Short offline       Completed without error       00%      4407         -
# 3  Short offline       Completed without error       00%      4406         -
# 4  Short offline       Completed without error       00%      4405         -
# 5  Short offline       Completed without error       00%      4404         -
# 6  Short offline       Completed without error       00%      4403         -
# 7  Short offline       Completed without error       00%      4402         -
# 8  Short offline       Completed without error       00%      4401         -
# 9  Short offline       Completed without error       00%      4400         -
#10  Short offline       Completed without error       00%      4399         -
#11  Short offline       Completed without error       00%      4398         -
#12  Short offline       Completed without error       00%      4397         -
#13  Short offline       Completed without error       00%      4396         -
#14  Short offline       Completed without error       00%      4395         -
#15  Short offline       Completed without error       00%      4394         -
#16  Short offline       Completed without error       00%      4393         -
#17  Short offline       Completed without error       00%      4392         -
#18  Short offline       Completed without error       00%      4391         -
#19  Short offline       Completed without error       00%      4390         -
#20  Short offline       Completed without error       00%      4389         -
#21  Short offline       Completed without error       00%      4388         -
#22  Short offline       Completed without error       00%      4387         -
#23  Short offline       Completed without error       00%      4386         -
#24  Short offline       Completed without error       00%      4385         -
#25  Short offline       Completed without error       00%      4384         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        Active (0)
Current Temperature:                    31 Celsius
Power Cycle Min/Max Temperature:     28/39 Celsius
Lifetime    Min/Max Temperature:      1/43 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    478 (297)

Index    Estimated Time   Temperature Celsius
 298    2015-06-12 14:32    31  ************
 ...    ..( 25 skipped).    ..  ************
 324    2015-06-12 14:58    31  ************
 325    2015-06-12 14:59    30  ***********
 ...    ..( 22 skipped).    ..  ***********
 348    2015-06-12 15:22    30  ***********
 349    2015-06-12 15:23    31  ************
 ...    ..(  5 skipped).    ..  ************
 355    2015-06-12 15:29    31  ************
 356    2015-06-12 15:30    30  ***********
 357    2015-06-12 15:31    30  ***********
 358    2015-06-12 15:32    30  ***********
 359    2015-06-12 15:33    31  ************
 360    2015-06-12 15:34    31  ************
 361    2015-06-12 15:35    30  ***********
 362    2015-06-12 15:36    31  ************
 ...    ..( 18 skipped).    ..  ************
 381    2015-06-12 15:55    31  ************
 382    2015-06-12 15:56    30  ***********
 ...    ..( 16 skipped).    ..  ***********
 399    2015-06-12 16:13    30  ***********
 400    2015-06-12 16:14    31  ************
 401    2015-06-12 16:15    31  ************
 402    2015-06-12 16:16    30  ***********
 ...    ..( 14 skipped).    ..  ***********
 417    2015-06-12 16:31    30  ***********
 418    2015-06-12 16:32    31  ************
 ...    ..(  2 skipped).    ..  ************
 421    2015-06-12 16:35    31  ************
 422    2015-06-12 16:36    30  ***********
 423    2015-06-12 16:37    30  ***********
 424    2015-06-12 16:38    30  ***********
 425    2015-06-12 16:39    31  ************
 ...    ..( 13 skipped).    ..  ************
 439    2015-06-12 16:53    31  ************
 440    2015-06-12 16:54    30  ***********
 ...    ..( 80 skipped).    ..  ***********
  43    2015-06-12 18:15    30  ***********
  44    2015-06-12 18:16    31  ************
 ...    ..( 51 skipped).    ..  ************
  96    2015-06-12 19:08    31  ************
  97    2015-06-12 19:09    32  *************
  98    2015-06-12 19:10    31  ************
 ...    ..( 55 skipped).    ..  ************
 154    2015-06-12 20:06    31  ************
 155    2015-06-12 20:07    32  *************
 156    2015-06-12 20:08    32  *************
 157    2015-06-12 20:09    32  *************
 158    2015-06-12 20:10    31  ************
 ...    ..( 12 skipped).    ..  ************
 171    2015-06-12 20:23    31  ************
 172    2015-06-12 20:24    30  ***********
 ...    ..( 66 skipped).    ..  ***********
 239    2015-06-12 21:31    30  ***********
 240    2015-06-12 21:32    31  ************
 ...    ..( 50 skipped).    ..  ************
 291    2015-06-12 22:23    31  ************
 292    2015-06-12 22:24    32  *************
 293    2015-06-12 22:25    31  ************
 294    2015-06-12 22:26    31  ************
 295    2015-06-12 22:27    31  ************
 296    2015-06-12 22:28    32  *************
 297    2015-06-12 22:29    31  ************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page Offset Size         Value  Description
  1  =====  =                =  == General Statistics (rev 2) ==
  1  0x008  4               22  Lifetime Power-On Resets
  1  0x018  6      39560006060  Logical Sectors Written
  1  0x020  6        299459792  Number of Write Commands
  1  0x028  6      59673688124  Logical Sectors Read
  1  0x030  6         38882226  Number of Read Commands
  4  =====  =                =  == General Errors Statistics (rev 1) ==
  4  0x008  4                0  Number of Reported Uncorrectable Errors
  4  0x010  4                0  Resets Between Cmd Acceptance and Completion
  5  =====  =                =  == Temperature Statistics (rev 1) ==
  5  0x008  1               31  Current Temperature
  5  0x010  1               30  Average Short Term Temperature
  5  0x018  1               29  Average Long Term Temperature
  5  0x020  1               40  Highest Temperature
  5  0x028  1               11  Lowest Temperature
  5  0x030  1               33  Highest Average Short Term Temperature
  5  0x038  1               22  Lowest Average Short Term Temperature
  5  0x040  1               29  Highest Average Long Term Temperature
  5  0x048  1               23  Lowest Average Long Term Temperature
  5  0x050  4                0  Time in Over-Temperature
  5  0x058  1               70  Specified Maximum Operating Temperature
  5  0x060  4                0  Time in Under-Temperature
  5  0x068  1                0  Specified Minimum Operating Temperature
  6  =====  =                =  == Transport Statistics (rev 1) ==
  6  0x008  4              436  Number of Hardware Resets
  6  0x010  4              240  Number of ASR Events
  6  0x018  4                0  Number of Interface CRC Errors
  7  =====  =                =  == Solid State Device Statistics (rev 1) ==
  7  0x008  1                0  Percentage Used Endurance Indicator

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x000a  4           34  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS

/dev/da13
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da13: Unknown USB bridge [0x0781:0x5571 (0x127)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da12
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da12: Unknown USB bridge [0x0781:0x5571 (0x127)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da11
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01e12204
Serial number:        WMC1F1746688
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:10 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        69 C

Manufactured in week 11 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  418
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  1
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       7438        0         0      7438          0      49557.441           0
write:     38628        0         0     38628          0       8133.581           0

Non-medium error count:      902

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5525                 - [-   -    -]
# 2  Background short  Completed                   -    5524                 - [-   -    -]
# 3  Background short  Completed                   -    5523                 - [-   -    -]
# 4  Background short  Completed                   -    5522                 - [-   -    -]
# 5  Background short  Completed                   -    5521                 - [-   -    -]
# 6  Background short  Completed                   -    5520                 - [-   -    -]
# 7  Background short  Completed                   -    5519                 - [-   -    -]
# 8  Background short  Completed                   -    5518                 - [-   -    -]
# 9  Background short  Completed                   -    5517                 - [-   -    -]
#10  Background short  Completed                   -    5516                 - [-   -    -]
#11  Background short  Completed                   -    5515                 - [-   -    -]
#12  Background short  Completed                   -    5514                 - [-   -    -]
#13  Background short  Completed                   -    5513                 - [-   -    -]
#14  Background short  Completed                   -    5512                 - [-   -    -]
#15  Background short  Completed                   -    5511                 - [-   -    -]
#16  Background short  Completed                   -    5510                 - [-   -    -]
#17  Background short  Completed                   -    5509                 - [-   -    -]
#18  Background short  Completed                   -    5509                 - [-   -    -]
#19  Background short  Completed                   -    5508                 - [-   -    -]
#20  Background short  Completed                   -    5507                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5527:09 [331629 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01e12206
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 11
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01e12207
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da10
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f012b1118
Serial number:        WMC1F1746405
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:10 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     36 C
Drive Trip Temperature:        69 C

Manufactured in week 12 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  469
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  1
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      12139       79        92     12218         79      50281.643           0
write:     45926      175       191     46101        175       8133.987           0

Non-medium error count:     1040

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5582                 - [-   -    -]
# 2  Background short  Completed                   -    5581                 - [-   -    -]
# 3  Background short  Completed                   -    5580                 - [-   -    -]
# 4  Background short  Completed                   -    5579                 - [-   -    -]
# 5  Background short  Completed                   -    5578                 - [-   -    -]
# 6  Background short  Completed                   -    5577                 - [-   -    -]
# 7  Background short  Completed                   -    5576                 - [-   -    -]
# 8  Background short  Completed                   -    5575                 - [-   -    -]
# 9  Background short  Completed                   -    5574                 - [-   -    -]
#10  Background short  Completed                   -    5573                 - [-   -    -]
#11  Background short  Completed                   -    5572                 - [-   -    -]
#12  Background short  Completed                   -    5571                 - [-   -    -]
#13  Background short  Completed                   -    5570                 - [-   -    -]
#14  Background short  Completed                   -    5569                 - [-   -    -]
#15  Background short  Completed                   -    5568                 - [-   -    -]
#16  Background short  Completed                   -    5567                 - [-   -    -]
#17  Background short  Completed                   -    5566                 - [-   -    -]
#18  Background short  Completed                   -    5565                 - [-   -    -]
#19  Background short  Completed                   -    5564                 - [-   -    -]
#20  Background short  Completed                   -    5563                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5583:43 [335023 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f012b111a
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 10
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f012b111b
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da9
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WDC WD4001FYYG-0
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01237194
Serial number:        WMC1F1173205
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:11 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     36 C
Drive Trip Temperature:        69 C

Manufactured in week 48 of year 2013
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  571
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  5
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       9425        0         0      9425          0      50020.766           0
write:     45705        3         3     45708          3       8133.497           0

Non-medium error count:      729

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5670                 - [-   -    -]
# 2  Background short  Completed                   -    5669                 - [-   -    -]
# 3  Background short  Completed                   -    5668                 - [-   -    -]
# 4  Background short  Completed                   -    5667                 - [-   -    -]
# 5  Background short  Completed                   -    5666                 - [-   -    -]
# 6  Background short  Completed                   -    5665                 - [-   -    -]
# 7  Background short  Completed                   -    5664                 - [-   -    -]
# 8  Background short  Completed                   -    5663                 - [-   -    -]
# 9  Background short  Completed                   -    5662                 - [-   -    -]
#10  Background short  Completed                   -    5661                 - [-   -    -]
#11  Background short  Completed                   -    5660                 - [-   -    -]
#12  Background short  Completed                   -    5659                 - [-   -    -]
#13  Background short  Completed                   -    5658                 - [-   -    -]
#14  Background short  Completed                   -    5657                 - [-   -    -]
#15  Background short  Completed                   -    5656                 - [-   -    -]
#16  Background short  Completed                   -    5655                 - [-   -    -]
#17  Background short  Completed                   -    5654                 - [-   -    -]
#18  Background short  Completed                   -    5653                 - [-   -    -]
#19  Background short  Completed                   -    5652                 - [-   -    -]
#20  Background short  Completed                   -    5651                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5671:22 [340282 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01237196
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 9
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01237197
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da8
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WDC WD4001FYYG-0
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f0123bae8
Serial number:        WMC1F1258251
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:11 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        69 C

Manufactured in week 47 of year 2013
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  551
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  3
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      13611       47       154     13658         47      49541.001           0
write:     40411        1         1     40412          1       8133.121           0

Non-medium error count:      722

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5633                 - [-   -    -]
# 2  Background short  Completed                   -    5632                 - [-   -    -]
# 3  Background short  Completed                   -    5631                 - [-   -    -]
# 4  Background short  Completed                   -    5630                 - [-   -    -]
# 5  Background short  Completed                   -    5629                 - [-   -    -]
# 6  Background short  Completed                   -    5628                 - [-   -    -]
# 7  Background short  Completed                   -    5627                 - [-   -    -]
# 8  Background short  Completed                   -    5626                 - [-   -    -]
# 9  Background short  Completed                   -    5625                 - [-   -    -]
#10  Background short  Completed                   -    5624                 - [-   -    -]
#11  Background short  Completed                   -    5623                 - [-   -    -]
#12  Background short  Completed                   -    5622                 - [-   -    -]
#13  Background short  Completed                   -    5621                 - [-   -    -]
#14  Background short  Completed                   -    5620                 - [-   -    -]
#15  Background short  Completed                   -    5619                 - [-   -    -]
#16  Background short  Completed                   -    5618                 - [-   -    -]
#17  Background short  Completed                   -    5617                 - [-   -    -]
#18  Background short  Completed                   -    5616                 - [-   -    -]
#19  Background short  Completed                   -    5615                 - [-   -    -]
#20  Background short  Completed                   -    5614                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5634:45 [338085 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f0123baea
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 8
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f0123baeb
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da7
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01e12764
Serial number:        WMC1F1747970
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:11 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        69 C

Manufactured in week 10 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  419
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  14
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      11196       31        31     11227         31      50716.057           0
write:     39799        0         0     39799          0       8134.233           0

Non-medium error count:      850

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5535                 - [-   -    -]
# 2  Background short  Completed                   -    5534                 - [-   -    -]
# 3  Background short  Completed                   -    5533                 - [-   -    -]
# 4  Background short  Completed                   -    5532                 - [-   -    -]
# 5  Background short  Completed                   -    5531                 - [-   -    -]
# 6  Background short  Completed                   -    5530                 - [-   -    -]
# 7  Background short  Completed                   -    5529                 - [-   -    -]
# 8  Background short  Completed                   -    5528                 - [-   -    -]
# 9  Background short  Completed                   -    5527                 - [-   -    -]
#10  Background short  Completed                   -    5526                 - [-   -    -]
#11  Background short  Completed                   -    5525                 - [-   -    -]
#12  Background short  Completed                   -    5524                 - [-   -    -]
#13  Background short  Completed                   -    5523                 - [-   -    -]
#14  Background short  Completed                   -    5522                 - [-   -    -]
#15  Background short  Completed                   -    5521                 - [-   -    -]
#16  Background short  Completed                   -    5520                 - [-   -    -]
#17  Background short  Completed                   -    5519                 - [-   -    -]
#18  Background short  Completed                   -    5518                 - [-   -    -]
#19  Background short  Completed                   -    5517                 - [-   -    -]
#20  Background short  Completed                   -    5516                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5536:36 [332196 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01e12766
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 7
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01e12767
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da6
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WDC WD4001FYYG-0
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01d21c10
Serial number:        WMC1F1167407
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:11 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        69 C

Manufactured in week 48 of year 2013
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  571
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  2
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       8060        2         2      8062          2      47682.448           0
write:     41929        0         0     41929          0       8134.220           0

Non-medium error count:      755

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5680                 - [-   -    -]
# 2  Background short  Completed                   -    5679                 - [-   -    -]
# 3  Background short  Completed                   -    5678                 - [-   -    -]
# 4  Background short  Completed                   -    5677                 - [-   -    -]
# 5  Background short  Completed                   -    5676                 - [-   -    -]
# 6  Background short  Completed                   -    5675                 - [-   -    -]
# 7  Background short  Completed                   -    5674                 - [-   -    -]
# 8  Background short  Completed                   -    5673                 - [-   -    -]
# 9  Background short  Completed                   -    5672                 - [-   -    -]
#10  Background short  Completed                   -    5671                 - [-   -    -]
#11  Background short  Completed                   -    5670                 - [-   -    -]
#12  Background short  Completed                   -    5669                 - [-   -    -]
#13  Background short  Completed                   -    5668                 - [-   -    -]
#14  Background short  Completed                   -    5667                 - [-   -    -]
#15  Background short  Completed                   -    5666                 - [-   -    -]
#16  Background short  Completed                   -    5665                 - [-   -    -]
#17  Background short  Completed                   -    5664                 - [-   -    -]
#18  Background short  Completed                   -    5663                 - [-   -    -]
#19  Background short  Completed                   -    5662                 - [-   -    -]
#20  Background short  Completed                   -    5661                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5681:34 [340894 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01d21c12
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 6
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01d21c13
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da5
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f012b1018
Serial number:        WMC1F1746618
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:12 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        69 C

Manufactured in week 10 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  419
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  1
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       8590        1         1      8591          1      50117.101           0
write:     39387        0         0     39387          0       8126.512           0

Non-medium error count:      874

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5533                 - [-   -    -]
# 2  Background short  Completed                   -    5532                 - [-   -    -]
# 3  Background short  Completed                   -    5531                 - [-   -    -]
# 4  Background short  Completed                   -    5530                 - [-   -    -]
# 5  Background short  Completed                   -    5529                 - [-   -    -]
# 6  Background short  Completed                   -    5528                 - [-   -    -]
# 7  Background short  Completed                   -    5527                 - [-   -    -]
# 8  Background short  Completed                   -    5526                 - [-   -    -]
# 9  Background short  Completed                   -    5525                 - [-   -    -]
#10  Background short  Completed                   -    5524                 - [-   -    -]
#11  Background short  Completed                   -    5523                 - [-   -    -]
#12  Background short  Completed                   -    5522                 - [-   -    -]
#13  Background short  Completed                   -    5521                 - [-   -    -]
#14  Background short  Completed                   -    5520                 - [-   -    -]
#15  Background short  Completed                   -    5519                 - [-   -    -]
#16  Background short  Completed                   -    5518                 - [-   -    -]
#17  Background short  Completed                   -    5517                 - [-   -    -]
#18  Background short  Completed                   -    5516                 - [-   -    -]
#19  Background short  Completed                   -    5515                 - [-   -    -]
#20  Background short  Completed                   -    5514                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5534:57 [332097 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f012b101a
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 5
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f012b101b
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da4
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WDC WD4001FYYG-0
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01d20024
Serial number:        WMC1F1188606
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:12 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        69 C

Manufactured in week 50 of year 2013
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  420
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  5
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      16770      115       116     16885        115      49379.642           0
write:     40395        0         0     40395          0       8126.968           0

Non-medium error count:      886

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5527                 - [-   -    -]
# 2  Background short  Completed                   -    5526                 - [-   -    -]
# 3  Background short  Completed                   -    5525                 - [-   -    -]
# 4  Background short  Completed                   -    5524                 - [-   -    -]
# 5  Background short  Completed                   -    5523                 - [-   -    -]
# 6  Background short  Completed                   -    5522                 - [-   -    -]
# 7  Background short  Completed                   -    5521                 - [-   -    -]
# 8  Background short  Completed                   -    5520                 - [-   -    -]
# 9  Background short  Completed                   -    5519                 - [-   -    -]
#10  Background short  Completed                   -    5518                 - [-   -    -]
#11  Background short  Completed                   -    5517                 - [-   -    -]
#12  Background short  Completed                   -    5516                 - [-   -    -]
#13  Background short  Completed                   -    5515                 - [-   -    -]
#14  Background short  Completed                   -    5514                 - [-   -    -]
#15  Background short  Completed                   -    5513                 - [-   -    -]
#16  Background short  Completed                   -    5512                 - [-   -    -]
#17  Background short  Completed                   -    5511                 - [-   -    -]
#18  Background short  Completed                   -    5510                 - [-   -    -]
#19  Background short  Completed                   -    5509                 - [-   -    -]
#20  Background short  Completed                   -    5508                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5528:37 [331717 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01d20026
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 4
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01d20027
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f012b109c
Serial number:        WMC1F1742355
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:12 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        69 C

Manufactured in week 10 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  420
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  2
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      29645      579       593     30224        579      50229.579           0
write:     40146        0         0     40146          0       8128.171           0

Non-medium error count:      885

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5534                 - [-   -    -]
# 2  Background short  Completed                   -    5533                 - [-   -    -]
# 3  Background short  Completed                   -    5532                 - [-   -    -]
# 4  Background short  Completed                   -    5531                 - [-   -    -]
# 5  Background short  Completed                   -    5530                 - [-   -    -]
# 6  Background short  Completed                   -    5529                 - [-   -    -]
# 7  Background short  Completed                   -    5528                 - [-   -    -]
# 8  Background short  Completed                   -    5527                 - [-   -    -]
# 9  Background short  Completed                   -    5526                 - [-   -    -]
#10  Background short  Completed                   -    5525                 - [-   -    -]
#11  Background short  Completed                   -    5524                 - [-   -    -]
#12  Background short  Completed                   -    5523                 - [-   -    -]
#13  Background short  Completed                   -    5522                 - [-   -    -]
#14  Background short  Completed                   -    5521                 - [-   -    -]
#15  Background short  Completed                   -    5520                 - [-   -    -]
#16  Background short  Completed                   -    5519                 - [-   -    -]
#17  Background short  Completed                   -    5518                 - [-   -    -]
#18  Background short  Completed                   -    5517                 - [-   -    -]
#19  Background short  Completed                   -    5516                 - [-   -    -]
#20  Background short  Completed                   -    5515                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5535:57 [332157 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f012b109e
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 3
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f012b109f
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WDC WD4001FYYG-0
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01d2248c
Serial number:        WMC1F1168361
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:13 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        69 C

Manufactured in week 50 of year 2013
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  570
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  3
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      21766       37        37     21803         37      49413.930           0
write:     58411      112       112     58523        112       8128.352           0

Non-medium error count:      741

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5671                 - [-   -    -]
# 2  Background short  Completed                   -    5670                 - [-   -    -]
# 3  Background short  Completed                   -    5669                 - [-   -    -]
# 4  Background short  Completed                   -    5668                 - [-   -    -]
# 5  Background short  Completed                   -    5667                 - [-   -    -]
# 6  Background short  Completed                   -    5666                 - [-   -    -]
# 7  Background short  Completed                   -    5665                 - [-   -    -]
# 8  Background short  Completed                   -    5664                 - [-   -    -]
# 9  Background short  Completed                   -    5663                 - [-   -    -]
#10  Background short  Completed                   -    5662                 - [-   -    -]
#11  Background short  Completed                   -    5661                 - [-   -    -]
#12  Background short  Completed                   -    5660                 - [-   -    -]
#13  Background short  Completed                   -    5659                 - [-   -    -]
#14  Background short  Completed                   -    5658                 - [-   -    -]
#15  Background short  Completed                   -    5657                 - [-   -    -]
#16  Background short  Completed                   -    5656                 - [-   -    -]
#17  Background short  Completed                   -    5655                 - [-   -    -]
#18  Background short  Completed                   -    5654                 - [-   -    -]
#19  Background short  Completed                   -    5653                 - [-   -    -]
#20  Background short  Completed                   -    5652                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5672:16 [340336 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01d2248e
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 2
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01d2248f
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f01e1273c
Serial number:        WMC1F1746632
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:13 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     35 C
Drive Trip Temperature:        69 C

Manufactured in week 10 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  419
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  2
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      16072       23        23     16095         23      50173.117           0
write:     47782       48        48     47830         48       8127.191           0

Non-medium error count:      894

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5525                 - [-   -    -]
# 2  Background short  Completed                   -    5524                 - [-   -    -]
# 3  Background short  Completed                   -    5523                 - [-   -    -]
# 4  Background short  Completed                   -    5522                 - [-   -    -]
# 5  Background short  Completed                   -    5521                 - [-   -    -]
# 6  Background short  Completed                   -    5520                 - [-   -    -]
# 7  Background short  Completed                   -    5519                 - [-   -    -]
# 8  Background short  Completed                   -    5518                 - [-   -    -]
# 9  Background short  Completed                   -    5517                 - [-   -    -]
#10  Background short  Completed                   -    5516                 - [-   -    -]
#11  Background short  Completed                   -    5515                 - [-   -    -]
#12  Background short  Completed                   -    5514                 - [-   -    -]
#13  Background short  Completed                   -    5513                 - [-   -    -]
#14  Background short  Completed                   -    5512                 - [-   -    -]
#15  Background short  Completed                   -    5511                 - [-   -    -]
#16  Background short  Completed                   -    5510                 - [-   -    -]
#17  Background short  Completed                   -    5509                 - [-   -    -]
#18  Background short  Completed                   -    5508                 - [-   -    -]
#19  Background short  Completed                   -    5507                 - [-   -    -]
#20  Background short  Completed                   -    5506                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5527:08 [331628 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f01e1273e
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 1
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f01e1273f
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD4001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f012b10d0
Serial number:        WMC1F1746899
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Fri Jun 12 22:29:13 2015 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     34 C
Drive Trip Temperature:        69 C

Manufactured in week 10 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  419
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  48
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:      16763       34        34     16797         34      49815.896           0
write:     40586        5         5     40591          5       8127.220           0

Non-medium error count:      902

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -    5527                 - [-   -    -]
# 2  Background short  Completed                   -    5526                 - [-   -    -]
# 3  Background short  Completed                   -    5525                 - [-   -    -]
# 4  Background short  Completed                   -    5524                 - [-   -    -]
# 5  Background short  Completed                   -    5523                 - [-   -    -]
# 6  Background short  Completed                   -    5522                 - [-   -    -]
# 7  Background short  Completed                   -    5521                 - [-   -    -]
# 8  Background short  Completed                   -    5520                 - [-   -    -]
# 9  Background short  Completed                   -    5519                 - [-   -    -]
#10  Background short  Completed                   -    5518                 - [-   -    -]
#11  Background short  Completed                   -    5517                 - [-   -    -]
#12  Background short  Completed                   -    5516                 - [-   -    -]
#13  Background short  Completed                   -    5515                 - [-   -    -]
#14  Background short  Completed                   -    5514                 - [-   -    -]
#15  Background short  Completed                   -    5513                 - [-   -    -]
#16  Background short  Completed                   -    5512                 - [-   -    -]
#17  Background short  Completed                   -    5511                 - [-   -    -]
#18  Background short  Completed                   -    5510                 - [-   -    -]
#19  Background short  Completed                   -    5509                 - [-   -    -]
#20  Background short  Completed                   -    5508                 - [-   -    -]

Long (extended) Self Test duration: 31120 seconds [518.7 minutes]

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 5528:40 [331720 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f012b10d2
    attached SAS address = 0x500304800157e43f
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x50000c0f012b10d3
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/cd0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/cd0: Unknown USB bridge [0x0624:0x0430 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary



