+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1585171718                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1585171718                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 5951.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1585171718                        +
+--------------------------------------------------------------------------------+
                 id = 1
     smarttest_type = S
     smarttest_desc = 
     smarttest_hour = 0
 smarttest_daymonth = *
    smarttest_month = *
  smarttest_dayweek = *
smarttest_all_disks = 1
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1585171718                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                            smartctl -a @1585171718                             +
+--------------------------------------------------------------------------------+
/dev/da11
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG4VY1Z
LU WWN Device Id: 5 000cca 27ec2369a
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:38 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1176) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       444 (Average 436)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       60
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2938
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       60
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       178
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       178
194 Temperature_Celsius     0x0002   116   116   000    Old_age   Always       -       56 (Min/Max 24/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       181

SMART Error Log Version: 1
ATA Error Count: 181 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 181 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 50 08 78 35 40 40 00      01:15:48.518  WRITE FPDMA QUEUED
  61 00 00 78 34 40 40 00      01:15:48.517  WRITE FPDMA QUEUED
  61 38 00 48 8d 95 40 00      01:15:48.517  WRITE FPDMA QUEUED
  61 08 00 40 8d 95 40 00      01:15:48.517  WRITE FPDMA QUEUED
  61 38 08 08 8d 95 40 00      01:15:48.516  WRITE FPDMA QUEUED

Error 180 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 00 d9 ea 40 00      01:14:58.443  WRITE FPDMA QUEUED
  61 08 00 88 2f 40 40 00      01:14:58.441  WRITE FPDMA QUEUED
  61 08 00 30 dd ea 40 00      01:14:58.441  WRITE FPDMA QUEUED
  61 18 00 90 e4 ea 40 00      01:14:58.440  WRITE FPDMA QUEUED
  61 08 00 50 2c 40 40 00      01:14:58.440  WRITE FPDMA QUEUED

Error 179 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 20 2e 40 40 00      01:14:22.541  WRITE FPDMA QUEUED
  61 10 00 c0 85 95 40 00      01:14:22.541  WRITE FPDMA QUEUED
  61 08 00 98 db ea 40 00      01:14:22.540  WRITE FPDMA QUEUED
  61 58 00 e0 e1 ea 40 00      01:14:22.540  WRITE FPDMA QUEUED
  61 28 00 88 d4 ea 40 00      01:14:22.540  WRITE FPDMA QUEUED

Error 178 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 50 d6 ea 40 00      01:13:41.044  WRITE FPDMA QUEUED
  61 10 00 40 2d 40 40 00      01:13:41.043  WRITE FPDMA QUEUED
  61 08 00 38 2d 40 40 00      01:13:41.043  WRITE FPDMA QUEUED
  61 10 00 b8 de ea 40 00      01:13:41.041  WRITE FPDMA QUEUED
  61 08 00 10 81 95 40 00      01:13:41.041  WRITE FPDMA QUEUED

Error 177 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 c0 cf ea 40 00      01:12:08.555  WRITE FPDMA QUEUED
  61 08 00 20 26 40 40 00      01:12:08.550  WRITE FPDMA QUEUED
  61 08 00 f0 7c 95 40 00      01:12:08.550  WRITE FPDMA QUEUED
  61 10 00 38 d3 ea 40 00      01:12:08.549  WRITE FPDMA QUEUED
  61 10 00 48 d0 ea 40 00      01:12:08.548  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2925         -
# 2  Short offline       Completed without error       00%      2901         -
# 3  Short offline       Completed without error       00%      2877         -
# 4  Short offline       Completed without error       00%      2853         -
# 5  Short offline       Completed without error       00%      2829         -
# 6  Short offline       Completed without error       00%      2805         -
# 7  Short offline       Completed without error       00%      2781         -
# 8  Short offline       Completed without error       00%      2757         -
# 9  Short offline       Completed without error       00%      2733         -
#10  Short offline       Completed without error       00%      2709         -
#11  Short offline       Completed without error       00%      2685         -
#12  Short offline       Completed without error       00%      2661         -
#13  Short offline       Completed without error       00%      2637         -
#14  Short offline       Completed without error       00%      2613         -
#15  Short offline       Completed without error       00%      2589         -
#16  Short offline       Completed without error       00%      2565         -
#17  Short offline       Completed without error       00%      2541         -
#18  Short offline       Completed without error       00%      2518         -
#19  Short offline       Completed without error       00%      2494         -
#20  Short offline       Completed without error       00%      2470         -
#21  Short offline       Completed without error       00%      2446         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da10
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEKTYPMZ
LU WWN Device Id: 5 000cca 267f59ee6
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:38 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1140) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   131   131   054    Old_age   Offline      -       104
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       444 (Average 437)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       61
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2938
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       61
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       177
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       177
194 Temperature_Celsius     0x0002   112   112   000    Old_age   Always       -       58 (Min/Max 23/58)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       126

SMART Error Log Version: 1
ATA Error Count: 126 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 126 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 e0 00 b8 da ea 40 00      01:15:44.643  WRITE FPDMA QUEUED
  61 d8 10 f0 da ea 40 00      01:15:44.642  WRITE FPDMA QUEUED
  61 00 08 f0 d9 ea 40 00      01:15:44.642  WRITE FPDMA QUEUED
  61 08 00 a8 cc ea 40 00      01:15:44.642  WRITE FPDMA QUEUED
  61 d8 10 40 31 40 40 00      01:15:44.641  WRITE FPDMA QUEUED

Error 125 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 98 dd ea 40 00      01:15:24.832  WRITE FPDMA QUEUED
  61 60 00 c8 e5 ea 40 00      01:15:24.830  WRITE FPDMA QUEUED
  61 20 00 40 d6 ea 40 00      01:15:24.830  WRITE FPDMA QUEUED
  61 18 00 b8 2c 40 40 00      01:15:24.830  WRITE FPDMA QUEUED
  61 10 00 f0 83 95 40 00      01:15:24.830  WRITE FPDMA QUEUED

Error 124 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 58 00 d8 e3 ea 40 00      01:14:48.050  WRITE FPDMA QUEUED
  61 28 00 48 d5 ea 40 00      01:14:48.049  WRITE FPDMA QUEUED
  61 18 00 b0 2b 40 40 00      01:14:48.049  WRITE FPDMA QUEUED
  61 10 00 08 83 95 40 00      01:14:48.049  WRITE FPDMA QUEUED
  61 20 00 68 d8 ea 40 00      01:14:48.048  WRITE FPDMA QUEUED

Error 123 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 c0 db ea 40 00      01:14:27.765  WRITE FPDMA QUEUED
  61 50 00 48 e2 ea 40 00      01:14:27.764  WRITE FPDMA QUEUED
  61 20 00 b0 d4 ea 40 00      01:14:27.764  WRITE FPDMA QUEUED
  61 18 00 40 2b 40 40 00      01:14:27.764  WRITE FPDMA QUEUED
  61 10 00 78 82 95 40 00      01:14:27.763  WRITE FPDMA QUEUED

Error 122 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 50 00 80 e1 ea 40 00      01:14:17.281  WRITE FPDMA QUEUED
  61 18 00 68 d4 ea 40 00      01:14:17.280  WRITE FPDMA QUEUED
  61 18 00 08 2b 40 40 00      01:14:17.280  WRITE FPDMA QUEUED
  61 10 00 28 82 95 40 00      01:14:17.280  WRITE FPDMA QUEUED
  61 08 08 78 d8 ea 40 00      01:14:17.279  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2925         -
# 2  Short offline       Completed without error       00%      2901         -
# 3  Short offline       Completed without error       00%      2877         -
# 4  Short offline       Completed without error       00%      2853         -
# 5  Short offline       Completed without error       00%      2829         -
# 6  Short offline       Completed without error       00%      2805         -
# 7  Short offline       Completed without error       00%      2781         -
# 8  Short offline       Completed without error       00%      2757         -
# 9  Short offline       Completed without error       00%      2733         -
#10  Short offline       Completed without error       00%      2709         -
#11  Short offline       Completed without error       00%      2685         -
#12  Short offline       Completed without error       00%      2661         -
#13  Short offline       Completed without error       00%      2637         -
#14  Short offline       Completed without error       00%      2613         -
#15  Short offline       Completed without error       00%      2589         -
#16  Short offline       Completed without error       00%      2565         -
#17  Short offline       Completed without error       00%      2541         -
#18  Short offline       Completed without error       00%      2518         -
#19  Short offline       Completed without error       00%      2494         -
#20  Short offline       Completed without error       00%      2470         -
#21  Short offline       Completed without error       00%      2446         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da9
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG67HUZ
LU WWN Device Id: 5 000cca 27ec2d66b
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:38 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1107) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   146   146   024    Pre-fail  Always       -       454 (Average 444)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       60
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2938
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       60
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       176
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       176
194 Temperature_Celsius     0x0002   114   114   000    Old_age   Always       -       57 (Min/Max 24/58)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       201

SMART Error Log Version: 1
ATA Error Count: 201 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 201 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 58 00 70 e3 ea 40 00      01:14:44.301  WRITE FPDMA QUEUED
  61 28 00 20 d5 ea 40 00      01:14:44.301  WRITE FPDMA QUEUED
  61 18 00 98 2b 40 40 00      01:14:44.300  WRITE FPDMA QUEUED
  61 18 00 e0 82 95 40 00      01:14:44.300  WRITE FPDMA QUEUED
  61 10 00 30 d9 ea 40 00      01:14:44.300  WRITE FPDMA QUEUED

Error 200 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 40 d8 ea 40 00      01:14:43.048  WRITE FPDMA QUEUED
  61 08 00 38 d8 ea 40 00      01:14:43.047  WRITE FPDMA QUEUED
  61 10 00 68 e3 ea 40 00      01:14:43.045  WRITE FPDMA QUEUED
  61 08 00 e0 82 95 40 00      01:14:43.045  WRITE FPDMA QUEUED
  61 10 00 28 d9 ea 40 00      01:14:43.044  WRITE FPDMA QUEUED

Error 199 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 e8 85 95 40 00      01:14:28.800  WRITE FPDMA QUEUED
  61 08 00 c0 db ea 40 00      01:14:28.800  WRITE FPDMA QUEUED
  61 60 00 40 e2 ea 40 00      01:14:28.799  WRITE FPDMA QUEUED
  61 20 00 b0 d4 ea 40 00      01:14:28.799  WRITE FPDMA QUEUED
  61 18 00 40 2b 40 40 00      01:14:28.798  WRITE FPDMA QUEUED

Error 198 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 20 00 18 d4 ea 40 00      01:14:08.299  WRITE FPDMA QUEUED
  61 08 00 d8 2a 40 40 00      01:14:08.298  WRITE FPDMA QUEUED
  61 18 00 d8 81 95 40 00      01:14:08.298  WRITE FPDMA QUEUED
  61 08 00 20 d8 ea 40 00      01:14:08.297  WRITE FPDMA QUEUED
  61 08 00 40 d7 ea 40 00      01:14:08.297  WRITE FPDMA QUEUED

Error 197 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 e8 df ea 40 00      01:13:57.800  WRITE FPDMA QUEUED
  61 10 00 e0 d3 ea 40 00      01:13:57.799  WRITE FPDMA QUEUED
  61 10 00 c8 d3 ea 40 00      01:13:57.799  WRITE FPDMA QUEUED
  61 08 00 90 81 95 40 00      01:13:57.798  WRITE FPDMA QUEUED
  61 10 00 c8 d7 ea 40 00      01:13:57.798  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2925         -
# 2  Short offline       Completed without error       00%      2901         -
# 3  Short offline       Completed without error       00%      2877         -
# 4  Short offline       Completed without error       00%      2853         -
# 5  Short offline       Completed without error       00%      2829         -
# 6  Short offline       Completed without error       00%      2805         -
# 7  Short offline       Completed without error       00%      2781         -
# 8  Short offline       Completed without error       00%      2757         -
# 9  Short offline       Completed without error       00%      2733         -
#10  Short offline       Completed without error       00%      2709         -
#11  Short offline       Completed without error       00%      2685         -
#12  Short offline       Completed without error       00%      2661         -
#13  Short offline       Completed without error       00%      2637         -
#14  Short offline       Completed without error       00%      2613         -
#15  Short offline       Completed without error       00%      2589         -
#16  Short offline       Completed without error       00%      2565         -
#17  Short offline       Completed without error       00%      2541         -
#18  Short offline       Completed without error       00%      2518         -
#19  Short offline       Completed without error       00%      2494         -
#20  Short offline       Completed without error       00%      2470         -
#21  Short offline       Completed without error       00%      2446         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da8
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG44G6Z
LU WWN Device Id: 5 000cca 27ec1e238
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:38 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1282) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   127   127   054    Old_age   Offline      -       120
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       447 (Average 437)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       60
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2938
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       60
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       176
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       176
194 Temperature_Celsius     0x0002   110   110   000    Old_age   Always       -       59 (Min/Max 24/60)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       188

SMART Error Log Version: 1
ATA Error Count: 188 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 188 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 b8 00 18 32 40 40 00      01:15:44.715  WRITE FPDMA QUEUED
  61 f8 00 e8 89 95 40 00      01:15:44.714  WRITE FPDMA QUEUED
  61 10 00 d0 89 95 40 00      01:15:44.713  WRITE FPDMA QUEUED
  61 48 00 88 df ea 40 00      01:15:44.713  WRITE FPDMA QUEUED
  61 58 08 58 d7 ea 40 00      01:15:44.713  WRITE FPDMA QUEUED

Error 187 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 00 e1 ea 40 00      01:14:08.388  WRITE FPDMA QUEUED
  61 40 00 b0 e0 ea 40 00      01:14:08.387  WRITE FPDMA QUEUED
  61 20 00 18 d4 ea 40 00      01:14:08.365  WRITE FPDMA QUEUED
  61 08 00 d0 2a 40 40 00      01:14:08.363  WRITE FPDMA QUEUED
  61 18 00 d8 81 95 40 00      01:14:08.362  WRITE FPDMA QUEUED

Error 186 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 60 00 b0 e0 ea 40 00      01:14:07.120  WRITE FPDMA QUEUED
  61 20 00 18 d4 ea 40 00      01:14:07.120  WRITE FPDMA QUEUED
  61 18 00 d0 2a 40 40 00      01:14:07.119  WRITE FPDMA QUEUED
  61 18 00 d8 81 95 40 00      01:14:07.119  WRITE FPDMA QUEUED
  61 08 00 20 d8 ea 40 00      01:14:07.119  WRITE FPDMA QUEUED

Error 185 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 c0 82 95 40 00      01:13:26.860  WRITE FPDMA QUEUED
  61 00 00 c0 81 95 40 00      01:13:26.859  WRITE FPDMA QUEUED
  61 18 08 48 d9 ea 40 00      01:13:26.858  WRITE FPDMA QUEUED
  61 00 00 48 d8 ea 40 00      01:13:26.858  WRITE FPDMA QUEUED
  61 e0 00 68 d7 ea 40 00      01:13:26.857  WRITE FPDMA QUEUED

Error 184 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 e0 00 68 d7 ea 40 00      01:13:25.799  WRITE FPDMA QUEUED
  61 c0 00 b0 d1 ea 40 00      01:13:25.798  WRITE FPDMA QUEUED
  61 68 00 48 28 40 40 00      01:13:25.798  WRITE FPDMA QUEUED
  61 28 00 28 7f 95 40 00      01:13:25.797  WRITE FPDMA QUEUED
  61 10 00 98 d5 ea 40 00      01:13:25.797  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2925         -
# 2  Short offline       Completed without error       00%      2901         -
# 3  Short offline       Completed without error       00%      2877         -
# 4  Short offline       Completed without error       00%      2853         -
# 5  Short offline       Completed without error       00%      2829         -
# 6  Short offline       Completed without error       00%      2805         -
# 7  Short offline       Completed without error       00%      2781         -
# 8  Short offline       Completed without error       00%      2757         -
# 9  Short offline       Completed without error       00%      2733         -
#10  Short offline       Completed without error       00%      2709         -
#11  Short offline       Completed without error       00%      2685         -
#12  Short offline       Completed without error       00%      2661         -
#13  Short offline       Completed without error       00%      2637         -
#14  Short offline       Completed without error       00%      2613         -
#15  Short offline       Completed without error       00%      2589         -
#16  Short offline       Completed without error       00%      2565         -
#17  Short offline       Completed without error       00%      2541         -
#18  Short offline       Completed without error       00%      2518         -
#19  Short offline       Completed without error       00%      2494         -
#20  Short offline       Completed without error       00%      2470         -
#21  Short offline       Completed without error       00%      2446         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da7
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEKTW22Z
LU WWN Device Id: 5 000cca 267f59506
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:38 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1266) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   148   148   024    Pre-fail  Always       -       446 (Average 443)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       78
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4558
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       78
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       246
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       246
194 Temperature_Celsius     0x0002   112   112   000    Old_age   Always       -       58 (Min/Max 24/59)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4544         -
# 2  Short offline       Completed without error       00%      4520         -
# 3  Short offline       Completed without error       00%      4496         -
# 4  Short offline       Completed without error       00%      4472         -
# 5  Short offline       Completed without error       00%      4448         -
# 6  Short offline       Completed without error       00%      4424         -
# 7  Short offline       Completed without error       00%      4400         -
# 8  Short offline       Completed without error       00%      4376         -
# 9  Short offline       Completed without error       00%      4352         -
#10  Short offline       Completed without error       00%      4328         -
#11  Short offline       Completed without error       00%      4304         -
#12  Short offline       Completed without error       00%      4280         -
#13  Short offline       Completed without error       00%      4256         -
#14  Short offline       Completed without error       00%      4232         -
#15  Short offline       Completed without error       00%      4208         -
#16  Short offline       Completed without error       00%      4184         -
#17  Short offline       Completed without error       00%      4160         -
#18  Short offline       Completed without error       00%      4137         -
#19  Short offline       Completed without error       00%      4113         -
#20  Short offline       Completed without error       00%      4089         -
#21  Short offline       Completed without error       00%      4065         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da6
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEKUJEVZ
LU WWN Device Id: 5 000cca 267f5e187
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1089) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       442 (Average 440)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       78
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4557
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       78
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       246
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       246
194 Temperature_Celsius     0x0002   122   122   000    Old_age   Always       -       53 (Min/Max 25/53)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       1

SMART Error Log Version: 1
ATA Error Count: 1
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 1709 hours (71 days + 5 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 c0 59 cd 40 00   6d+18:52:53.215  READ FPDMA QUEUED
  60 40 20 c0 5f cd 40 00   6d+18:52:53.214  READ FPDMA QUEUED
  60 00 18 c0 5d cd 40 00   6d+18:52:53.214  READ FPDMA QUEUED
  60 00 10 c0 5b cd 40 00   6d+18:52:53.214  READ FPDMA QUEUED
  60 c0 00 00 58 cd 40 00   6d+18:52:53.214  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4544         -
# 2  Short offline       Completed without error       00%      4520         -
# 3  Short offline       Completed without error       00%      4496         -
# 4  Short offline       Completed without error       00%      4472         -
# 5  Short offline       Completed without error       00%      4448         -
# 6  Short offline       Completed without error       00%      4424         -
# 7  Short offline       Completed without error       00%      4400         -
# 8  Short offline       Completed without error       00%      4376         -
# 9  Short offline       Completed without error       00%      4352         -
#10  Short offline       Completed without error       00%      4328         -
#11  Short offline       Completed without error       00%      4304         -
#12  Short offline       Completed without error       00%      4280         -
#13  Short offline       Completed without error       00%      4256         -
#14  Short offline       Completed without error       00%      4232         -
#15  Short offline       Completed without error       00%      4208         -
#16  Short offline       Completed without error       00%      4184         -
#17  Short offline       Completed without error       00%      4160         -
#18  Short offline       Completed without error       00%      4137         -
#19  Short offline       Completed without error       00%      4113         -
#20  Short offline       Completed without error       00%      4089         -
#21  Short offline       Completed without error       00%      4065         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da5
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEKRZ3MZ
LU WWN Device Id: 5 000cca 267f4b7bb
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1036) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       442 (Average 435)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       81
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4558
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       81
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       251
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       251
194 Temperature_Celsius     0x0002   112   112   000    Old_age   Always       -       58 (Min/Max 24/58)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4544         -
# 2  Short offline       Completed without error       00%      4520         -
# 3  Short offline       Completed without error       00%      4496         -
# 4  Short offline       Completed without error       00%      4472         -
# 5  Short offline       Completed without error       00%      4448         -
# 6  Short offline       Completed without error       00%      4424         -
# 7  Short offline       Completed without error       00%      4400         -
# 8  Short offline       Completed without error       00%      4376         -
# 9  Short offline       Completed without error       00%      4352         -
#10  Short offline       Completed without error       00%      4328         -
#11  Short offline       Completed without error       00%      4304         -
#12  Short offline       Completed without error       00%      4280         -
#13  Short offline       Completed without error       00%      4256         -
#14  Short offline       Completed without error       00%      4232         -
#15  Short offline       Completed without error       00%      4208         -
#16  Short offline       Completed without error       00%      4184         -
#17  Short offline       Completed without error       00%      4160         -
#18  Short offline       Completed without error       00%      4137         -
#19  Short offline       Completed without error       00%      4113         -
#20  Short offline       Completed without error       00%      4089         -
#21  Short offline       Completed without error       00%      4065         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da4
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG4YK0Z
LU WWN Device Id: 5 000cca 27ec24068
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1163) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       441 (Average 440)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       44
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       3873
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       44
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       191
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       191
194 Temperature_Celsius     0x0002   112   112   000    Old_age   Always       -       58 (Min/Max 25/58)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3860         -
# 2  Short offline       Completed without error       00%      3836         -
# 3  Short offline       Completed without error       00%      3812         -
# 4  Short offline       Completed without error       00%      3788         -
# 5  Short offline       Completed without error       00%      3764         -
# 6  Short offline       Completed without error       00%      3740         -
# 7  Short offline       Completed without error       00%      3716         -
# 8  Short offline       Completed without error       00%      3692         -
# 9  Short offline       Completed without error       00%      3668         -
#10  Short offline       Completed without error       00%      3644         -
#11  Short offline       Completed without error       00%      3620         -
#12  Short offline       Completed without error       00%      3596         -
#13  Short offline       Completed without error       00%      3572         -
#14  Short offline       Completed without error       00%      3548         -
#15  Short offline       Completed without error       00%      3524         -
#16  Short offline       Completed without error       00%      3500         -
#17  Short offline       Completed without error       00%      3476         -
#18  Short offline       Completed without error       00%      3453         -
#19  Short offline       Completed without error       00%      3429         -
#20  Short offline       Completed without error       00%      3405         -
#21  Short offline       Completed without error       00%      3381         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da3
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEK4T51N
LU WWN Device Id: 5 000cca 267ec72b3
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1169) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   148   148   024    Pre-fail  Always       -       444 (Average 443)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       64
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2939
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       64
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       180
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       180
194 Temperature_Celsius     0x0002   118   118   000    Old_age   Always       -       55 (Min/Max 23/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       130

SMART Error Log Version: 1
ATA Error Count: 130 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 130 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 b8 dd ea 40 00      01:15:53.646  WRITE FPDMA QUEUED
  61 08 00 b8 cc ea 40 00      01:15:53.645  WRITE FPDMA QUEUED
  61 08 00 00 36 40 40 00      01:15:53.644  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 00 00      01:15:49.860  FLUSH CACHE EXT
  61 10 00 68 e1 ea 40 00      01:15:49.860  WRITE FPDMA QUEUED

Error 129 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 48 e0 ea 40 00      01:15:45.816  WRITE FPDMA QUEUED
  61 40 00 08 e0 ea 40 00      01:15:45.815  WRITE FPDMA QUEUED
  61 08 00 00 e0 ea 40 00      01:15:45.815  WRITE FPDMA QUEUED
  61 08 00 b8 db ea 40 00      01:15:45.778  WRITE FPDMA QUEUED
  61 08 00 f8 df ea 40 00      01:15:45.777  WRITE FPDMA QUEUED

Error 128 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 18 00 08 d9 ea 40 00      01:14:58.460  WRITE FPDMA QUEUED
  61 10 00 98 2f 40 40 00      01:14:58.459  WRITE FPDMA QUEUED
  61 08 00 90 2f 40 40 00      01:14:58.457  WRITE FPDMA QUEUED
  61 10 00 98 e4 ea 40 00      01:14:58.454  WRITE FPDMA QUEUED
  61 08 00 f8 d9 ea 40 00      01:14:58.454  WRITE FPDMA QUEUED

Error 127 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 38 00 98 d9 ea 40 00      01:14:53.219  WRITE FPDMA QUEUED
  61 50 00 20 2f 40 40 00      01:14:53.219  WRITE FPDMA QUEUED
  61 18 00 20 87 95 40 00      01:14:53.218  WRITE FPDMA QUEUED
  61 08 00 f8 75 95 40 00      01:14:53.218  WRITE FPDMA QUEUED
  61 a8 00 60 dc ea 40 00      01:14:53.218  WRITE FPDMA QUEUED

Error 126 occurred at disk power-on lifetime: 21 hours (0 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 20 00 90 d4 ea 40 00      01:14:22.551  WRITE FPDMA QUEUED
  61 18 00 28 2b 40 40 00      01:14:22.551  WRITE FPDMA QUEUED
  61 10 00 58 82 95 40 00      01:14:22.550  WRITE FPDMA QUEUED
  61 10 00 a0 d8 ea 40 00      01:14:22.550  WRITE FPDMA QUEUED
  61 20 00 a8 d7 ea 40 00      01:14:22.550  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2925         -
# 2  Short offline       Completed without error       00%      2901         -
# 3  Short offline       Completed without error       00%      2877         -
# 4  Short offline       Completed without error       00%      2853         -
# 5  Short offline       Completed without error       00%      2829         -
# 6  Short offline       Completed without error       00%      2805         -
# 7  Short offline       Completed without error       00%      2781         -
# 8  Short offline       Completed without error       00%      2757         -
# 9  Short offline       Completed without error       00%      2733         -
#10  Short offline       Completed without error       00%      2709         -
#11  Short offline       Completed without error       00%      2685         -
#12  Short offline       Completed without error       00%      2661         -
#13  Short offline       Completed without error       00%      2637         -
#14  Short offline       Completed without error       00%      2613         -
#15  Short offline       Completed without error       00%      2590         -
#16  Short offline       Completed without error       00%      2565         -
#17  Short offline       Completed without error       00%      2541         -
#18  Short offline       Completed without error       00%      2518         -
#19  Short offline       Completed without error       00%      2494         -
#20  Short offline       Completed without error       00%      2470         -
#21  Short offline       Completed without error       00%      2446         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da2
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG4X80Z
LU WWN Device Id: 5 000cca 27ec23b90
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1138) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       440 (Average 434)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       171
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       3532
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       67
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       294
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       294
194 Temperature_Celsius     0x0002   125   125   000    Old_age   Always       -       52 (Min/Max 24/52)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       222

SMART Error Log Version: 1
ATA Error Count: 222 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 222 occurred at disk power-on lifetime: 615 hours (25 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 e8 d7 ea 40 00      01:15:45.770  WRITE FPDMA QUEUED
  61 08 00 e0 d7 ea 40 00      01:15:45.769  WRITE FPDMA QUEUED
  61 08 00 e0 df ea 40 00      01:15:45.767  WRITE FPDMA QUEUED
  60 08 00 f8 4a 40 40 00      01:15:45.750  READ FPDMA QUEUED
  61 08 00 88 33 40 40 00      01:15:44.672  WRITE FPDMA QUEUED

Error 221 occurred at disk power-on lifetime: 615 hours (25 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 08 00 58 d9 ea 40 00      01:14:49.313  WRITE FPDMA QUEUED
  61 18 00 68 d8 ea 40 00      01:14:49.312  WRITE FPDMA QUEUED
  61 08 00 58 d8 ea 40 00      01:14:49.312  WRITE FPDMA QUEUED
  61 18 00 a8 2e 40 40 00      01:14:48.069  WRITE FPDMA QUEUED
  61 18 00 70 86 95 40 00      01:14:48.069  WRITE FPDMA QUEUED

Error 220 occurred at disk power-on lifetime: 615 hours (25 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 a0 e2 ea 40 00      01:14:32.944  WRITE FPDMA QUEUED
  61 08 00 98 e2 ea 40 00      01:14:32.943  WRITE FPDMA QUEUED
  61 18 00 c8 db ea 40 00      01:14:32.941  WRITE FPDMA QUEUED
  61 08 00 58 2b 40 40 00      01:14:32.941  WRITE FPDMA QUEUED
  61 18 00 88 82 95 40 00      01:14:32.941  WRITE FPDMA QUEUED

Error 219 occurred at disk power-on lifetime: 615 hours (25 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 e8 da ea 40 00      01:14:01.843  WRITE FPDMA QUEUED
  61 58 00 48 e0 ea 40 00      01:14:01.842  WRITE FPDMA QUEUED
  61 20 00 f0 d3 ea 40 00      01:14:01.842  WRITE FPDMA QUEUED
  61 18 00 b8 2a 40 40 00      01:14:01.841  WRITE FPDMA QUEUED
  61 10 00 b8 81 95 40 00      01:14:01.841  WRITE FPDMA QUEUED

Error 218 occurred at disk power-on lifetime: 615 hours (25 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 10 00 80 df ea 40 00      01:13:51.553  WRITE FPDMA QUEUED
  61 08 00 b8 d3 ea 40 00      01:13:51.553  WRITE FPDMA QUEUED
  61 08 00 a8 d3 ea 40 00      01:13:51.552  WRITE FPDMA QUEUED
  61 18 00 68 81 95 40 00      01:13:51.552  WRITE FPDMA QUEUED
  61 08 00 a0 d7 ea 40 00      01:13:51.552  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3519         -
# 2  Short offline       Completed without error       00%      3495         -
# 3  Short offline       Completed without error       00%      3471         -
# 4  Short offline       Completed without error       00%      3447         -
# 5  Short offline       Completed without error       00%      3423         -
# 6  Short offline       Completed without error       00%      3399         -
# 7  Short offline       Completed without error       00%      3375         -
# 8  Short offline       Completed without error       00%      3351         -
# 9  Short offline       Completed without error       00%      3327         -
#10  Short offline       Completed without error       00%      3303         -
#11  Short offline       Completed without error       00%      3279         -
#12  Short offline       Completed without error       00%      3255         -
#13  Short offline       Completed without error       00%      3231         -
#14  Short offline       Completed without error       00%      3207         -
#15  Short offline       Completed without error       00%      3183         -
#16  Short offline       Completed without error       00%      3159         -
#17  Short offline       Completed without error       00%      3135         -
#18  Short offline       Completed without error       00%      3112         -
#19  Short offline       Completed without error       00%      3088         -
#20  Short offline       Completed without error       00%      3064         -
#21  Short offline       Completed without error       00%      3040         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da1
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1DH3DMNZ
LU WWN Device Id: 5 000cca 26ccfa40b
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1158) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       444 (Average 441)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       297
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10828
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       292
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4708
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4708
194 Temperature_Celsius     0x0002   127   127   000    Old_age   Always       -       51 (Min/Max 22/52)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10814         -
# 2  Short offline       Completed without error       00%     10790         -
# 3  Short offline       Completed without error       00%     10766         -
# 4  Short offline       Completed without error       00%     10742         -
# 5  Short offline       Completed without error       00%     10718         -
# 6  Short offline       Completed without error       00%     10694         -
# 7  Short offline       Completed without error       00%     10670         -
# 8  Short offline       Completed without error       00%     10646         -
# 9  Short offline       Completed without error       00%     10622         -
#10  Short offline       Completed without error       00%     10598         -
#11  Short offline       Completed without error       00%     10574         -
#12  Short offline       Completed without error       00%     10550         -
#13  Short offline       Completed without error       00%     10526         -
#14  Short offline       Completed without error       00%     10502         -
#15  Short offline       Completed without error       00%     10478         -
#16  Short offline       Completed without error       00%     10454         -
#17  Short offline       Completed without error       00%     10430         -
#18  Short offline       Completed without error       00%     10407         -
#19  Short offline       Completed without error       00%     10383         -
#20  Short offline       Completed without error       00%     10359         -
#21  Short offline       Completed without error       00%     10335         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da0
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1DH5MKKZ
LU WWN Device Id: 5 000cca 26cd0a6cf
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1041) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   131   131   054    Old_age   Offline      -       104
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       443 (Average 439)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       272
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10166
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       268
 22 Unknown_Attribute       0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4750
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4750
194 Temperature_Celsius     0x0002   118   118   000    Old_age   Always       -       55 (Min/Max 23/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10153         -
# 2  Short offline       Completed without error       00%     10129         -
# 3  Short offline       Completed without error       00%     10105         -
# 4  Short offline       Completed without error       00%     10081         -
# 5  Short offline       Completed without error       00%     10057         -
# 6  Short offline       Completed without error       00%     10033         -
# 7  Short offline       Completed without error       00%     10009         -
# 8  Short offline       Completed without error       00%      9985         -
# 9  Short offline       Completed without error       00%      9961         -
#10  Short offline       Completed without error       00%      9937         -
#11  Short offline       Completed without error       00%      9913         -
#12  Short offline       Completed without error       00%      9889         -
#13  Short offline       Completed without error       00%      9865         -
#14  Short offline       Completed without error       00%      9841         -
#15  Short offline       Completed without error       00%      9817         -
#16  Short offline       Completed without error       00%      9793         -
#17  Short offline       Completed without error       00%      9769         -
#18  Short offline       Completed without error       00%      9746         -
#19  Short offline       Completed without error       00%      9722         -
#20  Short offline       Completed without error       00%      9698         -
#21  Short offline       Completed without error       00%      9674         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada1
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel 53x and Pro 2500 Series SSDs
Device Model:     INTEL SSDSC2BW080A4
Serial Number:    CVDA652000UV0806GN
LU WWN Device Id: 5 5cd2e4 14d2d8952
Firmware Version: DC32
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x05)	Offline data collection activity
					was aborted by an interrupting command from host.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  33)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		( 1953) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0025)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       5455h+24m+31.260s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       49
170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       27
183 SATA_Downshift_Count    0x0032   100   100   000    Old_age   Always       -       51
184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   031   045   000    Old_age   Always       -       31 (Min/Max 20/45)
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       27
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       1
225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       15392
226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535
227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       99
228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   080   080   000    Old_age   Always       -       0
241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       15392
242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       1982017
249 NAND_Writes_1GiB        0x0032   100   100   000    Old_age   Always       -       51647

SMART Error Log not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Offline             Interrupted (host reset)      10%      5454         -
# 2  Offline             Interrupted (host reset)      10%      5453         -
# 3  Offline             Interrupted (host reset)      10%      5453         -
# 4  Offline             Interrupted (host reset)      10%      5453         -
# 5  Offline             Interrupted (host reset)      10%      5453         -
# 6  Offline             Interrupted (host reset)      10%      5450         -
# 7  Offline             Interrupted (host reset)      10%      5450         -
# 8  Offline             Interrupted (host reset)      10%      5450         -
# 9  Offline             Interrupted (host reset)      10%      5450         -
#10  Offline             Interrupted (host reset)      10%      5450         -
#11  Offline             Interrupted (host reset)      10%      5450         -
#12  Short offline       Completed without error       00%      5447         -
#13  Short offline       Completed without error       00%      5423         -
#14  Short offline       Completed without error       00%      5400         -
#15  Short offline       Completed without error       00%      5376         -
#16  Short offline       Completed without error       00%      5353         -
#17  Short offline       Completed without error       00%      5329         -
#18  Short offline       Completed without error       00%      5305         -
#19  Short offline       Completed without error       00%      5281         -
#20  Short offline       Completed without error       00%      5258         -
#21  Short offline       Completed without error       00%      5234         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada0
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel 53x and Pro 2500 Series SSDs
Device Model:     INTEL SSDSC2BW080A4
Serial Number:    CVDA626300QQ0806GN
LU WWN Device Id: 5 5cd2e4 14d0a7c2d
Firmware Version: DC32
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Mar 25 16:28:39 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x05)	Offline data collection activity
					was aborted by an interrupting command from host.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  33)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		( 1953) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0025)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       3611h+31m+44.660s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       48
170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       27
183 SATA_Downshift_Count    0x0032   100   100   000    Old_age   Always       -       8
184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   032   048   000    Old_age   Always       -       32 (Min/Max 17/48)
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       27
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       14389
226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535
227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       98
228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   068   068   000    Old_age   Always       -       0
241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       14389
242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       869271
249 NAND_Writes_1GiB        0x0032   100   100   000    Old_age   Always       -       74577

SMART Error Log not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Offline             Interrupted (host reset)      10%      3610         -
# 2  Offline             Interrupted (host reset)      10%      3610         -
# 3  Offline             Interrupted (host reset)      10%      3609         -
# 4  Offline             Interrupted (host reset)      10%      3609         -
# 5  Offline             Interrupted (host reset)      10%      3609         -
# 6  Offline             Interrupted (host reset)      10%      3606         -
# 7  Offline             Interrupted (host reset)      10%      3606         -
# 8  Offline             Interrupted (host reset)      10%      3606         -
# 9  Offline             Interrupted (host reset)      10%      3606         -
#10  Offline             Interrupted (host reset)      10%      3606         -
#11  Offline             Interrupted (host reset)      10%      3606         -
#12  Short offline       Completed without error       00%      3603         -
#13  Short offline       Completed without error       00%      3580         -
#14  Short offline       Completed without error       00%      3556         -
#15  Short offline       Completed without error       00%      3532         -
#16  Short offline       Completed without error       00%      3509         -
#17  Short offline       Completed without error       00%      3485         -
#18  Short offline       Completed without error       00%      3461         -
#19  Short offline       Completed without error       00%      3438         -
#20  Short offline       Completed without error       00%      3414         -
#21  Short offline       Completed without error       00%      3390         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/nvd0
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/nvd0: To monitor NVMe disks use /dev/nvme* device names
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

debug finished in 1 seconds for smartctl -a


