+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1565609614                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1565609614                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 3448.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1565609614                        +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1565609614                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                            smartctl -a @1565609614                             +
+--------------------------------------------------------------------------------+
/dev/da35
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d8bfe3
Serial number:        ZAD7YLTR0000C9279JLF
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:35 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     58 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1755734904
  Blocks received from initiator = 2107926824
  Blocks read from cache and sent to initiator = 202732582
  Number of read and write commands whose size <= segment size = 18473619
  Number of read and write commands whose size > segment size = 5008

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.75
  number of minutes until next internal SMART test = 24

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   446680164        0         0  446680164          0        896.220           0
write:         0        0         0         0          0       1176.731           0
verify:  1950805        0         0   1950805          0          2.717           0

Non-medium error count:        3


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da34
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d8a51f
Serial number:        ZAD7YM2A0000C9279MTC
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:35 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     59 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  158
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1671453816
  Blocks received from initiator = 2065756344
  Blocks read from cache and sent to initiator = 181516954
  Number of read and write commands whose size <= segment size = 18830659
  Number of read and write commands whose size > segment size = 5639

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   412159743        0         0  412159743          0        853.095           0
write:         0        0         0         0          0       1172.847           0
verify:  1831859        0         0   1831859          0          2.689           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da33
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7e9e713
Serial number:        ZAD818RQ0000C9273KUU
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:36 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     56 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  100
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  187
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1718532320
  Blocks received from initiator = 2232356248
  Blocks read from cache and sent to initiator = 199181109
  Number of read and write commands whose size <= segment size = 18637371
  Number of read and write commands whose size > segment size = 5172

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   424357943        0         0  424357943          0        877.226           0
write:         0        0         0         0          0       1253.209           0
verify:  1882257        0         0   1882257          0          2.664           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da32
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b63893
Serial number:        ZAD7QMKL0000C924JGHL
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:37 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     61 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  161
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1813994280
  Blocks received from initiator = 2102720968
  Blocks read from cache and sent to initiator = 209790488
  Number of read and write commands whose size <= segment size = 18505307
  Number of read and write commands whose size > segment size = 5365

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 28

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   447690036        0         0  447690036          0        926.135           0
write:         0        0         0         0          0       1177.432           0
verify:  1865674        0         0   1865674          0          2.631           0

Non-medium error count:        3


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da31
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b66407
Serial number:        ZAD7Q8MW0000C924EV65
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:38 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     61 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  159
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1504685000
  Blocks received from initiator = 1721670280
  Blocks read from cache and sent to initiator = 174553196
  Number of read and write commands whose size <= segment size = 24489844
  Number of read and write commands whose size > segment size = 3820

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 28

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   371551021        0         0  371551021          0        767.404           0
write:         0        0         0         0          0       1002.859           0
verify:  1958548        0         0   1958548          0          2.995           0

Non-medium error count:        4


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da30
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d1df27
Serial number:        ZAD7XQQA0000C9276CRT
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:39 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     58 C
Drive Trip Temperature:        60 C

Manufactured in week 06 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  160
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1688706144
  Blocks received from initiator = 2158988344
  Blocks read from cache and sent to initiator = 198828904
  Number of read and write commands whose size <= segment size = 18472426
  Number of read and write commands whose size > segment size = 5325

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 24

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   430400771        0         0  430400771          0        861.917           0
write:         0        0         0         0          0       1210.593           0
verify:  2037841        0         0   2037841          0          2.701           0

Non-medium error count:        2


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da29
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b65a9f
Serial number:        ZAD7Q8SH0000C924EVV3
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:40 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     62 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1510490360
  Blocks received from initiator = 1838042736
  Blocks read from cache and sent to initiator = 176668380
  Number of read and write commands whose size <= segment size = 25826463
  Number of read and write commands whose size > segment size = 3616

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 35

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   373483784        0         0  373483784          0        770.620           0
write:         0        0         0         0          0       1041.863           0
verify:  1713493        0         0   1713493          0          2.751           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da28
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b65f83
Serial number:        ZAD7QM1X0000C924JHGU
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:41 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     61 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1837457928
  Blocks received from initiator = 2174843360
  Blocks read from cache and sent to initiator = 215724284
  Number of read and write commands whose size <= segment size = 19693303
  Number of read and write commands whose size > segment size = 7293

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 27

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   454426547        0         0  454426547          0        938.326           0
write:         0        0         0         0          0       1222.822           0
verify:  1632261        0         0   1632261          0          2.452           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da27
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d886c3
Serial number:        ZAD7YMC60000C9276AWH
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:42 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     58 C
Drive Trip Temperature:        60 C

Manufactured in week 06 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  160
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1671055608
  Blocks received from initiator = 2267762336
  Blocks read from cache and sent to initiator = 186155287
  Number of read and write commands whose size <= segment size = 19525539
  Number of read and write commands whose size > segment size = 8265

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   412767097        0         0  412767097          0        853.161           0
write:         0        0         0         0          0       1282.433           0
verify:  1651030        0         0   1651030          0          2.421           0

Non-medium error count:        3


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da26
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7ce47c3
Serial number:        ZAD7WKHG0000C9273GU9
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:43 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     60 C
Drive Trip Temperature:        60 C

Manufactured in week 04 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1693917824
  Blocks received from initiator = 2162947544
  Blocks read from cache and sent to initiator = 190308393
  Number of read and write commands whose size <= segment size = 19311469
  Number of read and write commands whose size > segment size = 7131

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   418512342        0         0  418512342          0        864.872           0
write:         0        0         0         0          0       1220.170           0
verify:  1553443        0         0   1553443          0          2.414           0

Non-medium error count:        7


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da25
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7c38ecb
Serial number:        ZAD7VWKK0000C9253Z1V
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:43 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     60 C
Drive Trip Temperature:        60 C

Manufactured in week 04 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  155
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1772754712
  Blocks received from initiator = 2210580656
  Blocks read from cache and sent to initiator = 208183018
  Number of read and write commands whose size <= segment size = 19376911
  Number of read and write commands whose size > segment size = 8248

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   477476118        0         0  477476118          0        905.224           0
write:         0        0         0         0          0       1253.695           0
verify:  1784374        0         0   1784374          0          2.426           0

Non-medium error count:        2


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da24
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7cf12c3
Serial number:        ZAD7X0160000C927AXL6
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:44 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     56 C
Drive Trip Temperature:        60 C

Manufactured in week 04 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1617366120
  Blocks received from initiator = 2172946008
  Blocks read from cache and sent to initiator = 183987710
  Number of read and write commands whose size <= segment size = 19333382
  Number of read and write commands whose size > segment size = 7583

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   411742153        0         0  411742153          0        825.645           0
write:         0        0         0         0          0       1229.957           0
verify:  1802256        0         0   1802256          0          2.447           0

Non-medium error count:        6


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da23
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7abdbe3
Serial number:        ZAD7NLFL0000C9235DDP
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:45 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  160
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1750118128
  Blocks received from initiator = 2651335448
  Blocks read from cache and sent to initiator = 207595450
  Number of read and write commands whose size <= segment size = 19371778
  Number of read and write commands whose size > segment size = 25531

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   432216164        0         0  432216164          0        893.005           0
write:         0        0         0         0          0       1458.180           0
verify:  2269122        0         0   2269122          0          3.056           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da22
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500ad823ca7
Serial number:        ZAD83GN70000C92973B9
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:46 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     46 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1831169800
  Blocks received from initiator = 2659381448
  Blocks read from cache and sent to initiator = 214447122
  Number of read and write commands whose size <= segment size = 19591047
  Number of read and write commands whose size > segment size = 25295

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 25

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   456193031        0         0  456193031          0        934.547           0
write:         0        0         0         0          0       1471.585           0
verify:  2454913        0         0   2454913          0          3.013           0

Non-medium error count:        4


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da21
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500ad823aef
Serial number:        ZAD83GPS0000C92973GY
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:46 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     47 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  158
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1924120856
  Blocks received from initiator = 2647158824
  Blocks read from cache and sent to initiator = 248725619
  Number of read and write commands whose size <= segment size = 19544172
  Number of read and write commands whose size > segment size = 25327

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   501621415        0         0  501621415          0        982.115           0
write:         0        0         0         0          0       1463.963           0
verify:  2375276        0         0   2375276          0          3.035           0

Non-medium error count:        6


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da20
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E003
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a6740337
Serial number:        ZAD5ACA80000C849EXH5
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:47 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     46 C
Drive Trip Temperature:        60 C

Manufactured in week 26 of year 2018
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  163
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1757614408
  Blocks received from initiator = 2786093936
  Blocks read from cache and sent to initiator = 218460174
  Number of read and write commands whose size <= segment size = 19668387
  Number of read and write commands whose size > segment size = 27098

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 33

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   435573389        0         0  435573389          0        899.899           0
write:         0        0         0         0          0       1539.260           0

Non-medium error count:       60


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da19
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b6602f
Serial number:        ZAD7QM1V0000C924JHKE
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:47 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     46 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1866724944
  Blocks received from initiator = 2833904056
  Blocks read from cache and sent to initiator = 222698176
  Number of read and write commands whose size <= segment size = 19914782
  Number of read and write commands whose size > segment size = 25732

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 26

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   460807008        0         0  460807008          0        952.742           0
write:         0        0         0         0          0       1578.651           0
verify:  2253084        0         0   2253084          0          3.021           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da18
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b67d4b
Serial number:        ZAD7QHB90000C925063J
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:48 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1928065624
  Blocks received from initiator = 2654573464
  Blocks read from cache and sent to initiator = 245636102
  Number of read and write commands whose size <= segment size = 19728955
  Number of read and write commands whose size > segment size = 25179

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 25

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   480288829        0         0  480288829          0        984.184           0
write:         0        0         0         0          0       1471.650           0
verify:  2390177        0         0   2390177          0          2.985           0

Non-medium error count:        3


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da17
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d89e97
Serial number:        ZAD7YMRZ0000C9276EJQ
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:49 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     43 C
Drive Trip Temperature:        60 C

Manufactured in week 06 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1872594416
  Blocks received from initiator = 2565566616
  Blocks read from cache and sent to initiator = 226695425
  Number of read and write commands whose size <= segment size = 19054220
  Number of read and write commands whose size > segment size = 24673

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   468984419        0         0  468984419          0        955.882           0
write:         0        0         0         0          0       1406.451           0
verify:  2299362        0         0   2299362          0          2.887           0

Non-medium error count:        3


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da16
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d8c08b
Serial number:        ZAD7YLS70000C9273LU3
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:49 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     47 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1979081064
  Blocks received from initiator = 2577165704
  Blocks read from cache and sent to initiator = 245219687
  Number of read and write commands whose size <= segment size = 19144638
  Number of read and write commands whose size > segment size = 25760

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   509218721        0         0  509218721          0       1010.382           0
write:         0        0         0         0          0       1426.207           0
verify:  2094837        0         0   2094837          0          2.908           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da15
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7d1e07f
Serial number:        ZAD7XQQ10000C924EZR1
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:50 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     48 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  67
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  153
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1812649072
  Blocks received from initiator = 2567602624
  Blocks read from cache and sent to initiator = 207819918
  Number of read and write commands whose size <= segment size = 18847142
  Number of read and write commands whose size > segment size = 25304

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 24

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   446685682        0         0  446685682          0        925.239           0
write:         0        0         0         0          0       1423.944           0
verify:  1953867        0         0   1953867          0          2.838           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da14
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7e91ddb
Serial number:        ZAD80LWL0000C92972PH
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:51 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     48 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  160
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1815315056
  Blocks received from initiator = 2565909792
  Blocks read from cache and sent to initiator = 211326567
  Number of read and write commands whose size <= segment size = 18808932
  Number of read and write commands whose size > segment size = 25340

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   449150457        0         0  449150457          0        926.565           0
write:         0        0         0         0          0       1421.013           0
verify:  2150651        0         0   2150651          0          2.877           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da13
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7e9e927
Serial number:        ZAD7WX450000C9271LSL
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:51 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     47 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  154
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1883978680
  Blocks received from initiator = 2715021408
  Blocks read from cache and sent to initiator = 228961822
  Number of read and write commands whose size <= segment size = 19160159
  Number of read and write commands whose size > segment size = 25976

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.75
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   508699052        0         0  508699052          0        961.740           0
write:         0        0         0         0          0       1513.164           0
verify:  2054642        0         0   2054642          0          2.857           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da12
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500ad82405b
Serial number:        ZAD83GFZ0000C9299NA9
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:52 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     46 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  155
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1773955456
  Blocks received from initiator = 2693709440
  Blocks read from cache and sent to initiator = 205383755
  Number of read and write commands whose size <= segment size = 19040968
  Number of read and write commands whose size > segment size = 24824

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   446879487        0         0  446879487          0        905.374           0
write:         0        0         0         0          0       1489.642           0
verify:  2332627        0         0   2332627          0          2.891           0

Non-medium error count:        4


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da11
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adde5a1f
Serial number:        ZAD8DJ510000C9418NGX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:52 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  155
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1913187280
  Blocks received from initiator = 2576544312
  Blocks read from cache and sent to initiator = 207803486
  Number of read and write commands whose size <= segment size = 18099662
  Number of read and write commands whose size > segment size = 22520

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 22

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   476255365        0         0  476255365          0        976.365           0
write:         0        0         0         0          0       1421.045           0
verify:  2334716        0         0   2334716          0          3.187           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da10
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adda83e3
Serial number:        ZAD8D4R60000C9414HW4
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:53 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  135
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  221
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1843862808
  Blocks received from initiator = 2539676168
  Blocks read from cache and sent to initiator = 207963261
  Number of read and write commands whose size <= segment size = 18691516
  Number of read and write commands whose size > segment size = 23373

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 22

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   482932808        0         0  482932808          0        940.916           0
write:         0        0         0         0          0       1418.425           0
verify:  2475377        0         0   2475377          0          3.142           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da9
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adde7077
Serial number:        ZAD8DJ0C0000C9418M6C
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:54 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     47 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  156
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1987678272
  Blocks received from initiator = 2507925112
  Blocks read from cache and sent to initiator = 234177734
  Number of read and write commands whose size <= segment size = 18271924
  Number of read and write commands whose size > segment size = 22730

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 21

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   517013871        0         0  517013871          0       1014.558           0
write:         0        0         0         0          0       1390.085           0
verify:  2294596        0         0   2294596          0          3.134           0

Non-medium error count:        2


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da8
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500addd831f
Serial number:        ZAD8DLJD0000C9418T6D
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:54 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     47 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  155
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1865733064
  Blocks received from initiator = 2616456288
  Blocks read from cache and sent to initiator = 204307327
  Number of read and write commands whose size <= segment size = 18181568
  Number of read and write commands whose size > segment size = 22877

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 22

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   464070008        0         0  464070008          0        951.996           0
write:         0        0         0         0          0       1450.046           0
verify:  2462264        0         0   2462264          0          3.259           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da7
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7e9899b
Serial number:        ZAD80KA80000C928MX3G
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:55 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     46 C
Drive Trip Temperature:        60 C

Manufactured in week 07 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  72
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1837313184
  Blocks received from initiator = 2528537720
  Blocks read from cache and sent to initiator = 204142969
  Number of read and write commands whose size <= segment size = 18373145
  Number of read and write commands whose size > segment size = 23081

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   453065072        0         0  453065072          0        937.375           0
write:         0        0         0         0          0       1415.596           0
verify:  2233551        0         0   2233551          0          3.329           0

Non-medium error count:       20


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da6
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b6562b
Serial number:        ZAD7Q8VZ0000C924EW0A
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:55 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  153
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 2005723440
  Blocks received from initiator = 2510906904
  Blocks read from cache and sent to initiator = 233635149
  Number of read and write commands whose size <= segment size = 18051786
  Number of read and write commands whose size > segment size = 22603

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   500198502        0         0  500198502          0       1023.660           0
write:         0        0         0         0          0       1379.972           0
verify:  2539764        0         0   2539764          0          3.273           0

Non-medium error count:       11


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da5
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adda764b
Serial number:        ZAD8D5070000C9347XLK
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:56 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     41 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  135
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  222
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1825089200
  Blocks received from initiator = 2593234232
  Blocks read from cache and sent to initiator = 212192405
  Number of read and write commands whose size <= segment size = 18219510
  Number of read and write commands whose size > segment size = 23350

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   451529566        0         0  451529566          0        931.812           0
write:         0        0         0         0          0       1436.264           0
verify:  2167867        0         0   2167867          0          2.634           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da4
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500addd7e83
Serial number:        ZAD8DLM60000C9408DDL
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:57 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     44 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1965691032
  Blocks received from initiator = 2537808144
  Blocks read from cache and sent to initiator = 253528316
  Number of read and write commands whose size <= segment size = 18158556
  Number of read and write commands whose size > segment size = 24600

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.72
  number of minutes until next internal SMART test = 25

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   487482335        0         0  487482335          0       1003.851           0
write:         0        0         0         0          0       1413.457           0
verify:  1914841        0         0   1914841          0          2.583           0

Non-medium error count:        2


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da3
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adda4767
Serial number:        ZAD8D6360000C9349UT2
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:58 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  135
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  222
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1718466848
  Blocks received from initiator = 2613008864
  Blocks read from cache and sent to initiator = 190327931
  Number of read and write commands whose size <= segment size = 18020892
  Number of read and write commands whose size > segment size = 23722

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   425525691        0         0  425525691          0        877.262           0
write:         0        0         0         0          0       1454.468           0
verify:  1987300        0         0   1987300          0          2.593           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500adda3e97
Serial number:        ZAD8D5XP0000C9352R8A
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:58 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     45 C
Drive Trip Temperature:        60 C

Manufactured in week 17 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  135
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  224
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1815391120
  Blocks received from initiator = 2682406416
  Blocks read from cache and sent to initiator = 214952478
  Number of read and write commands whose size <= segment size = 18207699
  Number of read and write commands whose size > segment size = 23451

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   449557473        0         0  449557473          0        926.911           0
write:         0        0         0         0          0       1486.017           0
verify:  1971143        0         0   1971143          0          2.569           0

Non-medium error count:        2


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b6611f
Serial number:        ZAD7QM0Z0000C924JHHG
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:33:59 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     44 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  158
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1961418256
  Blocks received from initiator = 2542679920
  Blocks read from cache and sent to initiator = 255858805
  Number of read and write commands whose size <= segment size = 17933093
  Number of read and write commands whose size > segment size = 24770

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 23

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   529230206        0         0  529230206          0       1001.627           0
write:         0        0         0         0          0       1402.301           0
verify:  1972036        0         0   1972036          0          2.621           0

Non-medium error count:        0


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/da0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST6000NM0095
Revision:             E004
Compliance:           SPC-4
User Capacity:        6,001,175,126,016 bytes [6.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500a7b65ab3
Serial number:        ZAD7QM300000C924JGMU
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Aug 12 19:34:00 2019 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     43 C
Drive Trip Temperature:        60 C

Manufactured in week 02 of year 2019
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  69
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  157
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1700509024
  Blocks received from initiator = 2538870704
  Blocks read from cache and sent to initiator = 189483648
  Number of read and write commands whose size <= segment size = 17799850
  Number of read and write commands whose size > segment size = 23486

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 395.73
  number of minutes until next internal SMART test = 22

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   423049267        0         0  423049267          0        868.101           0
write:         0        0         0         0          0       1402.692           0
verify:  2022946        0         0   2022946          0          2.560           0

Non-medium error count:        1


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
No self-tests have been logged

/dev/ada1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON RBUSC180DS37128GH
Serial Number:    50026B7682C4AF84
LU WWN Device Id: 5 0026b7 682c4af84
Firmware Version: SBFK10D7
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Aug 12 19:34:01 2019 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       395
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       36
148 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       8
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       9
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
181 Program_Fail_Cnt_Total  0x0012   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   255   255   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       23
194 Temperature_Celsius     0x0023   054   049   000    Pre-fail  Always       -       46 (Min/Max 21/51)
196 Reallocated_Event_Count 0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       100
233 Media_Wearout_Indicator 0x0013   100   100   000    Pre-fail  Always       -       2
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       2
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       6
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       576

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON RBUSC180DS37128GH
Serial Number:    50026B7682C4A43A
LU WWN Device Id: 5 0026b7 682c4a43a
Firmware Version: SBFK10D7
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Aug 12 19:34:01 2019 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000a   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       395
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       40
148 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0022   100   100   000    Old_age   Always       -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       23
170 Unknown_Attribute       0x0013   100   100   010    Pre-fail  Always       -       25
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
181 Program_Fail_Cnt_Total  0x0012   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   255   255   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       27
194 Temperature_Celsius     0x0023   055   050   000    Pre-fail  Always       -       45 (Min/Max 21/50)
196 Reallocated_Event_Count 0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       4
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       100
233 Media_Wearout_Indicator 0x0013   100   100   000    Pre-fail  Always       -       2
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       2
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       9
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       576

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da35 SEAGATE:7200:ST6000NM0095:ZAD7YLTR0000C9279JLF C:58 dR:0 dW:0
/dev/da34 SEAGATE:7200:ST6000NM0095:ZAD7YM2A0000C9279MTC C:59 dR:0 dW:0
/dev/da33 SEAGATE:7200:ST6000NM0095:ZAD818RQ0000C9273KUU C:56 dR:0 dW:0
/dev/da32 SEAGATE:7200:ST6000NM0095:ZAD7QMKL0000C924JGHL C:61 dR:0 dW:0
/dev/da31 SEAGATE:7200:ST6000NM0095:ZAD7Q8MW0000C924EV65 C:61 dR:0 dW:0
/dev/da30 SEAGATE:7200:ST6000NM0095:ZAD7XQQA0000C9276CRT C:58 dR:0 dW:0
/dev/da29 SEAGATE:7200:ST6000NM0095:ZAD7Q8SH0000C924EVV3 C:62 dR:0 dW:0
/dev/da28 SEAGATE:7200:ST6000NM0095:ZAD7QM1X0000C924JHGU C:61 dR:0 dW:0
/dev/da27 SEAGATE:7200:ST6000NM0095:ZAD7YMC60000C9276AWH C:58 dR:0 dW:0
/dev/da26 SEAGATE:7200:ST6000NM0095:ZAD7WKHG0000C9273GU9 C:60 dR:0 dW:0
/dev/da25 SEAGATE:7200:ST6000NM0095:ZAD7VWKK0000C9253Z1V C:60 dR:0 dW:0
/dev/da24 SEAGATE:7200:ST6000NM0095:ZAD7X0160000C927AXL6 C:56 dR:0 dW:0
/dev/da23 SEAGATE:7200:ST6000NM0095:ZAD7NLFL0000C9235DDP C:42 dR:0 dW:0
/dev/da22 SEAGATE:7200:ST6000NM0095:ZAD83GN70000C92973B9 C:46 dR:0 dW:0
/dev/da21 SEAGATE:7200:ST6000NM0095:ZAD83GPS0000C92973GY C:47 dR:0 dW:0
/dev/da20 SEAGATE:7200:ST6000NM0095:ZAD5ACA80000C849EXH5 C:46 dR:0 dW:0
/dev/da19 SEAGATE:7200:ST6000NM0095:ZAD7QM1V0000C924JHKE C:46 dR:0 dW:0
/dev/da18 SEAGATE:7200:ST6000NM0095:ZAD7QHB90000C925063J C:45 dR:0 dW:0
/dev/da17 SEAGATE:7200:ST6000NM0095:ZAD7YMRZ0000C9276EJQ C:43 dR:0 dW:0
/dev/da16 SEAGATE:7200:ST6000NM0095:ZAD7YLS70000C9273LU3 C:47 dR:0 dW:0
/dev/da15 SEAGATE:7200:ST6000NM0095:ZAD7XQQ10000C924EZR1 C:48 dR:0 dW:0
/dev/da14 SEAGATE:7200:ST6000NM0095:ZAD80LWL0000C92972PH C:48 dR:0 dW:0
/dev/da13 SEAGATE:7200:ST6000NM0095:ZAD7WX450000C9271LSL C:47 dR:0 dW:0
/dev/da12 SEAGATE:7200:ST6000NM0095:ZAD83GFZ0000C9299NA9 C:46 dR:0 dW:0
/dev/da11 SEAGATE:7200:ST6000NM0095:ZAD8DJ510000C9418NGX C:42 dR:0 dW:0
/dev/da10 SEAGATE:7200:ST6000NM0095:ZAD8D4R60000C9414HW4 C:45 dR:0 dW:0
/dev/da9 SEAGATE:7200:ST6000NM0095:ZAD8DJ0C0000C9418M6C C:47 dR:0 dW:0
/dev/da8 SEAGATE:7200:ST6000NM0095:ZAD8DLJD0000C9418T6D C:47 dR:0 dW:0
/dev/da7 SEAGATE:7200:ST6000NM0095:ZAD80KA80000C928MX3G C:46 dR:0 dW:0
/dev/da6 SEAGATE:7200:ST6000NM0095:ZAD7Q8VZ0000C924EW0A C:45 dR:0 dW:0
/dev/da5 SEAGATE:7200:ST6000NM0095:ZAD8D5070000C9347XLK C:41 dR:0 dW:0
/dev/da4 SEAGATE:7200:ST6000NM0095:ZAD8DLM60000C9408DDL C:44 dR:0 dW:0
/dev/da3 SEAGATE:7200:ST6000NM0095:ZAD8D6360000C9349UT2 C:45 dR:0 dW:0
/dev/da2 SEAGATE:7200:ST6000NM0095:ZAD8D5XP0000C9352R8A C:45 dR:0 dW:0
/dev/da1 SEAGATE:7200:ST6000NM0095:ZAD7QM0Z0000C924JHHG C:44 dR:0 dW:0
/dev/da0 SEAGATE:7200:ST6000NM0095:ZAD7QM300000C924JGMU C:43 dR:0 dW:0
debug finished in 27 seconds for smartctl -a


