+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1561820877                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1561820877                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 2803.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1561820877                        +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1561820877                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                            smartctl -a @1561820877                             +
+--------------------------------------------------------------------------------+
/dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     KINGSTON SA400S37480G
Serial Number:    50026B778239FC5E
LU WWN Device Id: 5 0026b7 78239fc5e
Firmware Version: SBFK61K1
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 29 17:07:57 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1130
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       13
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       6
170 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       14
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       2
194 Temperature_Celsius     0x0022   070   068   000    Old_age   Always       -       30 (Min/Max 18/32)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
231 Temperature_Celsius     0x0000   000   000   000    Old_age   Offline      -       100
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       130
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       66
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       37
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       1
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       27008
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       27008

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

/dev/cd0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HL-DT-ST DVDRAM GH24NSD1
Serial Number:    K8NFC8I0929
LU WWN Device Id: 5 001480 000000000
Firmware Version: LE00
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (unknown minor revision code: 0x0210)
SATA Version is:  SATA 3.0, 1.5 Gb/s
Local Time is:    Sat Jun 29 17:07:57 2019 CEST
SMART support is: Unavailable - Packet Interface Devices [this device: CD/DVD] don't support ATA SMART

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
debug finished in 0 seconds for smartctl -a


