+--------------------------------------------------------------------------------+
+                       SMART - 'smartctl -x' @1522037953                        +
+--------------------------------------------------------------------------------+
/dev/ada2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9FD400328
LU WWN Device Id: 5 0004cf 20a1e1a95
Firmware Version: 2AR20002
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Mar 26 00:19:13 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(12480) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 208) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    804
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   090   085   025    -    3056
  4 Start_Stop_Count        -O--CK   095   095   000    -    6015
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    9358
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    139
 12 Power_Cycle_Count       -O--CK   099   099   000    -    1894
191 G-Sense_Error_Rate      -O---K   100   100   000    -    1505
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   058   000    -    24 (Min/Max 14/42)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   100   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    2304
223 Load_Retry_Count        -O--CK   100   100   000    -    139
225 Load_Cycle_Count        -O--CK   059   059   000    -    416609
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xc0-0xdf  GPL,SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 739 (device log contains only the most recent 8 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 739 [2] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 af 40 00  Error: UNC at LBA = 0x007251af = 7492015

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 90 00 01 00 00 00 72 51 af 40 00     00:00:08.787  READ FPDMA QUEUED
  61 00 02 00 08 00 00 03 ef 2d 18 40 00     00:00:09.007  WRITE FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 af 40 00     00:00:09.007  READ FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 fa a0 40 00     00:00:09.007  READ FPDMA QUEUED
  61 00 90 00 18 00 00 03 ef 2c d8 40 00     00:00:09.007  WRITE FPDMA QUEUED

Error 738 [1] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ae 40 00  Error: UNC at LBA = 0x007251ae = 7492014

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 90 00 01 00 00 00 72 51 ae 40 00     00:00:08.785  READ FPDMA QUEUED
  61 00 90 00 18 00 00 03 ef 2c d8 40 00     00:00:09.005  WRITE FPDMA QUEUED
  60 00 02 00 01 00 00 00 72 51 ae 40 00     00:00:09.005  READ FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 f2 18 40 00     00:00:09.005  READ FPDMA QUEUED
  61 00 90 00 08 00 00 03 ef 2c b8 40 00     00:00:09.005  WRITE FPDMA QUEUED

Error 737 [0] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ad 40 00  Error: UNC at LBA = 0x007251ad = 7492013

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 01 00 00 00 72 51 ad 40 00     00:00:08.660  READ FPDMA QUEUED
  61 00 00 00 08 00 00 03 ef 2c b8 40 00     00:00:09.003  WRITE FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 ad 40 00     00:00:09.003  READ FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 f1 98 40 00     00:00:09.003  READ FPDMA QUEUED
  61 00 90 00 08 00 00 03 ef 2b 88 40 00     00:00:09.003  WRITE FPDMA QUEUED

Error 736 [7] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ac 40 00  Error: UNC at LBA = 0x007251ac = 7492012

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 90 00 01 00 00 00 72 51 ac 40 00     00:00:08.755  READ FPDMA QUEUED
  61 00 00 00 08 00 00 03 ef 2b 88 40 00     00:00:09.002  WRITE FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 ac 40 00     00:00:09.002  READ FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 f1 18 40 00     00:00:09.002  READ FPDMA QUEUED
  61 00 90 00 10 00 00 03 ef 2a d0 40 00     00:00:09.002  WRITE FPDMA QUEUED

Error 735 [6] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ab 40 00  Error: UNC at LBA = 0x007251ab = 7492011

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 01 00 00 00 72 51 ab 40 00     00:00:08.755  READ FPDMA QUEUED
  61 00 90 00 10 00 00 03 ef 2a d0 40 00     00:00:09.000  WRITE FPDMA QUEUED
  60 00 00 00 01 00 00 00 72 51 ab 40 00     00:00:09.000  READ FPDMA QUEUED
  61 00 00 00 40 00 00 02 68 9f e0 40 00     00:00:09.000  WRITE FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 f0 98 40 00     00:00:09.000  READ FPDMA QUEUED

Error 734 [5] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ab 40 00  Error: WP at LBA = 0x007251ab = 7492011

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 90 00 10 00 00 03 ef 2a d0 40 00     00:00:08.971  WRITE FPDMA QUEUED
  60 00 00 00 01 00 00 00 72 51 ab 40 00     00:00:08.725  READ FPDMA QUEUED
  60 00 00 00 01 00 00 00 72 51 ab 40 00     00:00:08.970  READ FPDMA QUEUED
  61 00 00 00 10 00 00 03 ef 2a b8 40 00     00:00:08.970  WRITE FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 f0 18 40 00     00:00:08.970  READ FPDMA QUEUED

Error 733 [4] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 ab 40 00  Error: WP at LBA = 0x007251ab = 7492011

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 90 00 10 00 00 03 ef 2a b8 40 00     00:00:08.941  WRITE FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 ab 40 00     00:00:08.723  READ FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 ab 40 00     00:00:08.939  READ FPDMA QUEUED
  61 00 90 00 08 00 00 03 ef 29 b8 40 00     00:00:08.939  WRITE FPDMA QUEUED
  60 00 90 00 80 00 00 00 31 ef 98 40 00     00:00:08.939  READ FPDMA QUEUED

Error 732 [3] occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 01 00 00 00 72 51 aa 40 00  Error: UNC at LBA = 0x007251aa = 7492010

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 90 00 01 00 00 00 72 51 aa 40 00     00:00:08.723  READ FPDMA QUEUED
  61 00 00 00 40 00 00 02 68 9f a0 40 00     00:00:08.937  WRITE FPDMA QUEUED
  60 00 90 00 01 00 00 00 72 51 aa 40 00     00:00:08.937  READ FPDMA QUEUED
  61 00 90 00 40 00 00 02 68 9f 60 40 00     00:00:08.937  WRITE FPDMA QUEUED
  60 00 90 00 18 00 00 00 17 9c 90 40 00     00:00:08.937  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    24 Celsius
Power Cycle Min/Max Temperature:     22/25 Celsius
Lifetime    Min/Max Temperature:     14/42 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (57)

Index    Estimated Time   Temperature Celsius
  58    2018-03-25 13:40    24  *****
  59    2018-03-25 13:45    23  ****
 ...    ..( 46 skipped).    ..  ****
 106    2018-03-25 17:40    23  ****
 107    2018-03-25 17:45    24  *****
 108    2018-03-25 17:50    24  *****
 109    2018-03-25 17:55    24  *****
 110    2018-03-25 18:00    25  ******
 111    2018-03-25 18:05    25  ******
 112    2018-03-25 18:10    26  *******
 ...    ..(  5 skipped).    ..  *******
 118    2018-03-25 18:40    26  *******
 119    2018-03-25 18:45    24  *****
 ...    ..(  4 skipped).    ..  *****
 124    2018-03-25 19:10    24  *****
 125    2018-03-25 19:15    25  ******
 ...    ..(  9 skipped).    ..  ******
   7    2018-03-25 20:05    25  ******
   8    2018-03-25 20:10    24  *****
   9    2018-03-25 20:15    23  ****
  10    2018-03-25 20:20    22  ***
  11    2018-03-25 20:25    22  ***
  12    2018-03-25 20:30    22  ***
  13    2018-03-25 20:35    21  **
 ...    ..(  8 skipped).    ..  **
  22    2018-03-25 21:20    21  **
  23    2018-03-25 21:25    22  ***
  24    2018-03-25 21:30    22  ***
  25    2018-03-25 21:35    22  ***
  26    2018-03-25 21:40    24  *****
  27    2018-03-25 21:45    25  ******
 ...    ..(  4 skipped).    ..  ******
  32    2018-03-25 22:10    25  ******
  33    2018-03-25 22:15    24  *****
 ...    ..( 13 skipped).    ..  *****
  47    2018-03-25 23:25    24  *****
  48    2018-03-25 23:30    23  ****
  49    2018-03-25 23:35    23  ****
  50    2018-03-25 23:40    24  *****
 ...    ..(  6 skipped).    ..  *****
  57    2018-03-26 00:15    24  *****

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4           15  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4           14  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4            0  Vendor specific
0x8e07  4            0  Vendor specific
0x8e08  4            0  Vendor specific
0x8e09  4            0  Vendor specific
0x8e0a  4            0  Vendor specific
0x8e0b  4            0  Vendor specific
0x8e0c  4            0  Vendor specific
0x8e0d  4            0  Vendor specific
0x8e0e  4            0  Vendor specific
0x8e0f  4            0  Vendor specific
0x8e10  4            0  Vendor specific
0x8e11  4            0  Vendor specific

/dev/ada1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9DD402591
LU WWN Device Id: 5 0004cf 20a1f8d90
Firmware Version: 2AR20002
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Mar 26 00:19:14 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(13320) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 222) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    771
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   090   089   025    -    3055
  4 Start_Stop_Count        -O--CK   100   100   000    -    477
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    28069
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    408
 12 Power_Cycle_Count       -O--CK   100   100   000    -    160
191 G-Sense_Error_Rate      -O---K   100   100   000    -    21
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   060   000    -    23 (Min/Max 15/43)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   100   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    1594
223 Load_Retry_Count        -O--CK   100   100   000    -    408
225 Load_Cycle_Count        -O--CK   001   001   000    -    1732692
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xc0-0xdf  GPL,SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 715 (device log contains only the most recent 8 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 715 [2] occurred at disk power-on lifetime: 27598 hours (1149 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 08 00 00 31 8b 0b e0 40 00  Error: UNC at LBA = 0x318b0be0 = 831196128

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.818  READ FPDMA QUEUED
  61 00 00 00 10 00 00 13 fa 92 40 40 08     01:15:42.862  WRITE FPDMA QUEUED
  60 00 00 00 38 00 00 40 6f 66 b8 40 08     01:15:42.862  READ FPDMA QUEUED
  60 00 02 00 08 00 00 31 8b 0b e0 40 00     01:15:42.862  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     01:15:42.862  READ LOG EXT

Error 714 [1] occurred at disk power-on lifetime: 27598 hours (1149 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 08 00 00 31 8b 0b e0 40 00  Error: UNC at LBA = 0x318b0be0 = 831196128

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.818  READ FPDMA QUEUED
  61 00 00 00 10 00 00 13 fa 92 40 40 08     01:15:42.860  WRITE FPDMA QUEUED
  60 00 00 00 38 00 00 40 6f 66 b8 40 08     01:15:42.860  READ FPDMA QUEUED
  60 00 02 00 08 00 00 31 8b 0b e0 40 00     01:15:42.860  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     01:15:42.860  READ LOG EXT

Error 713 [0] occurred at disk power-on lifetime: 27598 hours (1149 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 08 00 00 31 8b 0b e0 40 00  Error: UNC at LBA = 0x318b0be0 = 831196128

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.818  READ FPDMA QUEUED
  61 00 00 00 10 00 00 13 fa 92 40 40 08     01:15:42.858  WRITE FPDMA QUEUED
  60 00 00 00 38 00 00 40 6f 66 b8 40 08     01:15:42.858  READ FPDMA QUEUED
  60 00 02 00 08 00 00 31 8b 0b e0 40 00     01:15:42.858  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     01:15:42.858  READ LOG EXT

Error 712 [7] occurred at disk power-on lifetime: 27598 hours (1149 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 08 00 00 31 8b 0b e0 40 00  Error: UNC at LBA = 0x318b0be0 = 831196128

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.818  READ FPDMA QUEUED
  61 00 00 00 10 00 00 13 fa 92 40 40 08     01:15:42.856  WRITE FPDMA QUEUED
  60 00 00 00 38 00 00 40 6f 66 b8 40 08     01:15:42.856  READ FPDMA QUEUED
  60 00 02 00 08 00 00 31 8b 0b e0 40 00     01:15:42.856  READ FPDMA QUEUED
  ef 00 02 00 00 00 00 00 00 00 00 40 00     01:15:42.856  SET FEATURES [Enable write cache]

Error 711 [6] occurred at disk power-on lifetime: 27598 hours (1149 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 08 00 00 31 8b 0b e0 40 00  Error: UNC at LBA = 0x318b0be0 = 831196128

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 38 00 00 40 6f 66 b8 40 08     01:15:42.828  READ FPDMA QUEUED
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.818  READ FPDMA QUEUED
  60 00 00 00 08 00 00 31 8b 0b e0 40 08     01:15:42.826  READ FPDMA QUEUED
  60 00 00 00 30 00 00 40 6f 67 20 40 08     01:15:42.826  READ FPDMA QUEUED
  60 00 00 00 28 00 00 14 04 00 70 40 08     01:15:42.825  READ FPDMA QUEUED

Error 710 [5] occurred at disk power-on lifetime: 23560 hours (981 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 04 00 00 02 86 44 80 40 00  Error: UNC at LBA = 0x02864480 = 42353792

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.570  READ FPDMA QUEUED
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.585  READ FPDMA QUEUED
  60 00 00 00 40 00 00 00 6d 72 e2 40 00     00:00:00.585  READ FPDMA QUEUED
  60 00 00 00 40 00 00 00 50 81 ca 40 00     00:00:00.585  READ FPDMA QUEUED
  61 00 00 00 b8 00 00 00 c6 0c 98 40 00     00:00:00.585  WRITE FPDMA QUEUED

Error 709 [4] occurred at disk power-on lifetime: 23560 hours (981 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 04 00 00 02 86 44 80 40 00  Error: UNC at LBA = 0x02864480 = 42353792

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.570  READ FPDMA QUEUED
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.583  READ FPDMA QUEUED
  61 00 00 00 08 00 00 00 50 49 80 40 00     00:00:00.583  WRITE FPDMA QUEUED
  60 00 00 00 40 00 00 01 8c c4 18 40 00     00:00:00.583  READ FPDMA QUEUED
  60 00 00 00 08 00 00 05 d9 38 a0 40 00     00:00:00.583  READ FPDMA QUEUED

Error 708 [3] occurred at disk power-on lifetime: 23560 hours (981 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 00 04 00 00 02 86 44 80 40 00  Error: UNC at LBA = 0x02864480 = 42353792

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.570  READ FPDMA QUEUED
  60 00 00 00 04 00 00 02 86 44 80 40 00     00:00:00.581  READ FPDMA QUEUED
  61 00 00 00 08 00 00 00 88 2a d0 40 00     00:00:00.581  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 04 5e 04 88 40 00     00:00:00.581  READ FPDMA QUEUED
  60 00 00 00 08 00 00 01 bb 95 70 40 00     00:00:00.581  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    23 Celsius
Power Cycle Min/Max Temperature:     21/24 Celsius
Lifetime    Min/Max Temperature:     15/43 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (41)

Index    Estimated Time   Temperature Celsius
  42    2018-03-25 13:40    23  ****
  43    2018-03-25 13:45    22  ***
 ...    ..( 45 skipped).    ..  ***
  89    2018-03-25 17:35    22  ***
  90    2018-03-25 17:40    23  ****
  91    2018-03-25 17:45    23  ****
  92    2018-03-25 17:50    23  ****
  93    2018-03-25 17:55    24  *****
  94    2018-03-25 18:00    24  *****
  95    2018-03-25 18:05    25  ******
 ...    ..(  6 skipped).    ..  ******
 102    2018-03-25 18:40    25  ******
 103    2018-03-25 18:45    23  ****
 104    2018-03-25 18:50    24  *****
 ...    ..( 10 skipped).    ..  *****
 115    2018-03-25 19:45    24  *****
 116    2018-03-25 19:50    25  ******
 117    2018-03-25 19:55    25  ******
 118    2018-03-25 20:00    25  ******
 119    2018-03-25 20:05    24  *****
 120    2018-03-25 20:10    23  ****
 121    2018-03-25 20:15    22  ***
 122    2018-03-25 20:20    22  ***
 123    2018-03-25 20:25    21  **
 124    2018-03-25 20:30    21  **
 125    2018-03-25 20:35    20  *
 ...    ..(  6 skipped).    ..  *
   4    2018-03-25 21:10    20  *
   5    2018-03-25 21:15    21  **
 ...    ..(  3 skipped).    ..  **
   9    2018-03-25 21:35    21  **
  10    2018-03-25 21:40    23  ****
  11    2018-03-25 21:45    24  *****
 ...    ..( 10 skipped).    ..  *****
  22    2018-03-25 22:40    24  *****
  23    2018-03-25 22:45    23  ****
 ...    ..( 17 skipped).    ..  ****
  41    2018-03-26 00:15    23  ****

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4           15  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4           14  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4            0  Vendor specific
0x8e07  4            0  Vendor specific
0x8e08  4            0  Vendor specific
0x8e09  4            0  Vendor specific
0x8e0a  4            0  Vendor specific
0x8e0b  4            0  Vendor specific
0x8e0c  4            0  Vendor specific
0x8e0d  4            0  Vendor specific
0x8e0e  4            0  Vendor specific
0x8e0f  4            0  Vendor specific
0x8e10  4            0  Vendor specific
0x8e11  4            0  Vendor specific

/dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HGST Travelstar 5K1000
Device Model:     HGST HTS541010A9E680
Serial Number:    JA108NSB0PTE0R
LU WWN Device Id: 5 000cca 8a0c9e776
Firmware Version: JA0OA710
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Mar 26 00:19:14 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   45) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 224) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   062    -    0
  2 Throughput_Performance  P-S--K   100   100   040    -    0
  3 Spin_Up_Time            PO---K   176   100   033    -    1
  4 Start_Stop_Count        -O--CK   100   100   000    -    105
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  7 Seek_Error_Rate         POSR-K   100   100   067    -    0
  8 Seek_Time_Performance   P-S--K   100   100   040    -    0
  9 Power_On_Hours          -O--CK   090   090   000    -    4495
 10 Spin_Retry_Count        PO--CK   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    92
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        PO--CK   100   100   097    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    30065033216
188 Command_Timeout         -O--CK   100   100   000    -    25770459136
190 Airflow_Temperature_Cel -O---K   076   061   045    -    24 (Min/Max 21/25)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    161
192 Power-Off_Retract_Count -O--CK   100   100   000    -    983055
193 Load_Cycle_Count        -O--CK   100   100   000    -    8222
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O--CK   100   100   000    -    0
198 Offline_Uncorrectable   ----CK   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   100   100   000    -    0
223 Load_Retry_Count        -O-R-K   100   100   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       481         -
# 2  Short offline       Completed without error       00%       407         -
# 3  Short offline       Completed without error       00%       362         -
# 4  Short offline       Completed without error       00%       229         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    24 Celsius
Power Cycle Min/Max Temperature:     21/25 Celsius
Lifetime    Min/Max Temperature:     15/39 Celsius
Lifetime    Average Temperature:        25 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/65 Celsius
Temperature History Size (Index):    128 (81)

Index    Estimated Time   Temperature Celsius
  82    2018-03-25 22:12    23  ****
 ...    ..( 77 skipped).    ..  ****
  32    2018-03-25 23:30    23  ****
  33    2018-03-25 23:31    22  ***
  34    2018-03-25 23:32    22  ***
  35    2018-03-25 23:33    23  ****
  36    2018-03-25 23:34    22  ***
  37    2018-03-25 23:35    23  ****
  38    2018-03-25 23:36    23  ****
  39    2018-03-25 23:37    23  ****
  40    2018-03-25 23:38    22  ***
  41    2018-03-25 23:39    22  ***
  42    2018-03-25 23:40    22  ***
  43    2018-03-25 23:41    23  ****
 ...    ..(  3 skipped).    ..  ****
  47    2018-03-25 23:45    23  ****
  48    2018-03-25 23:46    24  *****
  49    2018-03-25 23:47    23  ****
  50    2018-03-25 23:48    23  ****
  51    2018-03-25 23:49    23  ****
  52    2018-03-25 23:50    24  *****
 ...    ..(  5 skipped).    ..  *****
  58    2018-03-25 23:56    24  *****
  59    2018-03-25 23:57    23  ****
  60    2018-03-25 23:58    24  *****
  61    2018-03-25 23:59    23  ****
  62    2018-03-26 00:00    23  ****
  63    2018-03-26 00:01    24  *****
 ...    ..(  8 skipped).    ..  *****
  72    2018-03-26 00:10    24  *****
  73    2018-03-26 00:11    23  ****
  74    2018-03-26 00:12    24  *****
 ...    ..(  3 skipped).    ..  *****
  78    2018-03-26 00:16    24  *****
  79    2018-03-26 00:17    23  ****
  80    2018-03-26 00:18    24  *****
  81    2018-03-26 00:19    24  *****

SCT Error Recovery Control:
           Read:     85 (8.5 seconds)
          Write:     85 (8.5 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0009  2           15  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           14  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

/dev/da3
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da3: Unknown USB bridge [0x0781:0x5571 (0x127)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2SMJ9CD414277
LU WWN Device Id: 5 0004cf 20a3c396f
Firmware Version: 2AR20002
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Mar 26 00:19:16 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(12300) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 205) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    5
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   090   082   025    -    3057
  4 Start_Stop_Count        -O--CK   093   093   000    -    7327
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    11494
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    198
 12 Power_Cycle_Count       -O--CK   098   098   000    -    2372
191 G-Sense_Error_Rate      -O---K   100   100   000    -    441
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   054   000    -    24 (Min/Max 14/46)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    3376
223 Load_Retry_Count        -O--CK   100   100   000    -    198
225 Load_Cycle_Count        -O--CK   061   061   000    -    400492
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xc0-0xdf  GPL,SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    24 Celsius
Power Cycle Min/Max Temperature:     22/25 Celsius
Lifetime    Min/Max Temperature:     14/46 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (7)

Index    Estimated Time   Temperature Celsius
   8    2018-03-25 13:40    24  *****
   9    2018-03-25 13:45    23  ****
 ...    ..( 15 skipped).    ..  ****
  25    2018-03-25 15:05    23  ****
  26    2018-03-25 15:10    22  ***
  27    2018-03-25 15:15    23  ****
 ...    ..( 28 skipped).    ..  ****
  56    2018-03-25 17:40    23  ****
  57    2018-03-25 17:45    24  *****
  58    2018-03-25 17:50    24  *****
  59    2018-03-25 17:55    24  *****
  60    2018-03-25 18:00    25  ******
  61    2018-03-25 18:05    26  *******
 ...    ..(  6 skipped).    ..  *******
  68    2018-03-25 18:40    26  *******
  69    2018-03-25 18:45    24  *****
  70    2018-03-25 18:50    24  *****
  71    2018-03-25 18:55    24  *****
  72    2018-03-25 19:00    25  ******
 ...    ..( 11 skipped).    ..  ******
  84    2018-03-25 20:00    25  ******
  85    2018-03-25 20:05    24  *****
  86    2018-03-25 20:10    24  *****
  87    2018-03-25 20:15    23  ****
  88    2018-03-25 20:20    22  ***
  89    2018-03-25 20:25    22  ***
  90    2018-03-25 20:30    21  **
 ...    ..( 10 skipped).    ..  **
 101    2018-03-25 21:25    21  **
 102    2018-03-25 21:30    22  ***
 103    2018-03-25 21:35    22  ***
 104    2018-03-25 21:40    24  *****
 105    2018-03-25 21:45    25  ******
 ...    ..(  5 skipped).    ..  ******
 111    2018-03-25 22:15    25  ******
 112    2018-03-25 22:20    24  *****
 ...    ..( 12 skipped).    ..  *****
 125    2018-03-25 23:25    24  *****
 126    2018-03-25 23:30    23  ****
 127    2018-03-25 23:35    23  ****
   0    2018-03-25 23:40    24  *****
 ...    ..(  6 skipped).    ..  *****
   7    2018-03-26 00:15    24  *****

SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4           11  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4           12  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4            0  Vendor specific
0x8e07  4            0  Vendor specific
0x8e08  4            0  Vendor specific
0x8e09  4            0  Vendor specific
0x8e0a  4            0  Vendor specific
0x8e0b  4            0  Vendor specific
0x8e0c  4            0  Vendor specific
0x8e0d  4            0  Vendor specific
0x8e0e  4            0  Vendor specific
0x8e0f  4            0  Vendor specific
0x8e10  4            0  Vendor specific
0x8e11  4            0  Vendor specific

/dev/da1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Black
Device Model:     WDC WD1002FAEX-00Y9A0
Serial Number:    WD-WCAW33532270
LU WWN Device Id: 5 0014ee 25be92e81
Firmware Version: 05.01D05
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Mon Mar 26 00:19:18 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(15360) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 159) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    173
  3 Spin_Up_Time            POS--K   172   169   021    -    4400
  4 Start_Stop_Count        -O--CK   100   100   000    -    99
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   074   074   000    -    19618
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    97
192 Power-Off_Retract_Count -O--CK   200   200   000    -    95
193 Load_Cycle_Count        -O--CK   200   200   000    -    5
194 Temperature_Celsius     -O---K   111   102   000    -    36
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    28
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb5  GPL,SL  VS       1  Device vendor specific log
0xb6       GPL     VS       1  Device vendor specific log
0xb7       GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      24  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    36 Celsius
Power Cycle Min/Max Temperature:     35/40 Celsius
Lifetime    Min/Max Temperature:     33/46 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (474)

Index    Estimated Time   Temperature Celsius
 475    2018-03-25 16:22    35  ****************
 ...    ..(  7 skipped).    ..  ****************
   5    2018-03-25 16:30    35  ****************
   6    2018-03-25 16:31    36  *****************
   7    2018-03-25 16:32    36  *****************
   8    2018-03-25 16:33    36  *****************
   9    2018-03-25 16:34    37  ******************
 ...    ..(  3 skipped).    ..  ******************
  13    2018-03-25 16:38    37  ******************
  14    2018-03-25 16:39    38  *******************
 ...    ..(  4 skipped).    ..  *******************
  19    2018-03-25 16:44    38  *******************
  20    2018-03-25 16:45    39  ********************
 ...    ..( 10 skipped).    ..  ********************
  31    2018-03-25 16:56    39  ********************
  32    2018-03-25 16:57    40  *********************
 ...    ..( 84 skipped).    ..  *********************
 117    2018-03-25 18:22    40  *********************
 118    2018-03-25 18:23    39  ********************
 ...    ..( 11 skipped).    ..  ********************
 130    2018-03-25 18:35    39  ********************
 131    2018-03-25 18:36    38  *******************
 ...    ..( 33 skipped).    ..  *******************
 165    2018-03-25 19:10    38  *******************
 166    2018-03-25 19:11    37  ******************
 ...    ..( 84 skipped).    ..  ******************
 251    2018-03-25 20:36    37  ******************
 252    2018-03-25 20:37    36  *****************
 ...    ..(121 skipped).    ..  *****************
 374    2018-03-25 22:39    36  *****************
 375    2018-03-25 22:40    35  ****************
 ...    ..( 13 skipped).    ..  ****************
 389    2018-03-25 22:54    35  ****************
 390    2018-03-25 22:55    34  ***************
 ...    ..( 70 skipped).    ..  ***************
 461    2018-03-26 00:06    34  ***************
 462    2018-03-26 00:07     ?  -
 463    2018-03-26 00:08    35  ****************
 ...    ..( 10 skipped).    ..  ****************
 474    2018-03-26 00:19    35  ****************

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x000a  2           12  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x8000  4        23187  Vendor specific

/dev/da0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K2000
Device Model:     Hitachi HDS722020ALA330
Serial Number:    JK1174YAHM07JW
LU WWN Device Id: 5 000cca 221d6bb77
Firmware Version: JKAOA28A
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Mar 26 00:19:19 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(20567) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 343) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   016    -    0
  2 Throughput_Performance  P-S---   135   135   054    -    95
  3 Spin_Up_Time            POS---   130   130   024    -    549 (Average 560)
  4 Start_Stop_Count        -O--C-   100   100   000    -    271
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    2
  7 Seek_Error_Rate         PO-R--   100   100   067    -    0
  8 Seek_Time_Performance   P-S---   112   112   020    -    39
  9 Power_On_Hours          -O--C-   096   096   000    -    29873
 10 Spin_Retry_Count        PO--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    192
192 Power-Off_Retract_Count -O--CK   100   100   000    -    1034
193 Load_Cycle_Count        -O--C-   100   100   000    -    1034
194 Temperature_Celsius     -O----   157   157   000    -    38 (Min/Max 20/68)
196 Reallocated_Event_Count -O--CK   100   100   000    -    2
197 Current_Pending_Sector  -O---K   100   100   000    -    0
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL     R/O      7  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x20       GPL     R/O      1  Streaming performance log [OBS-8]
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    38 Celsius
Power Cycle Min/Max Temperature:     36/43 Celsius
Lifetime    Min/Max Temperature:     20/68 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (69)

Index    Estimated Time   Temperature Celsius
  70    2018-03-25 22:12    41  **********************
 ...    ..( 16 skipped).    ..  **********************
  87    2018-03-25 22:29    41  **********************
  88    2018-03-25 22:30    40  *********************
  89    2018-03-25 22:31    41  **********************
  90    2018-03-25 22:32    40  *********************
  91    2018-03-25 22:33    41  **********************
  92    2018-03-25 22:34    40  *********************
  93    2018-03-25 22:35    41  **********************
  94    2018-03-25 22:36    40  *********************
 ...    ..( 51 skipped).    ..  *********************
  18    2018-03-25 23:28    40  *********************
  19    2018-03-25 23:29    39  ********************
 ...    ..(  4 skipped).    ..  ********************
  24    2018-03-25 23:34    39  ********************
  25    2018-03-25 23:35    38  *******************
  26    2018-03-25 23:36    38  *******************
  27    2018-03-25 23:37    39  ********************
  28    2018-03-25 23:38    39  ********************
  29    2018-03-25 23:39    38  *******************
 ...    ..( 39 skipped).    ..  *******************
  69    2018-03-26 00:19    38  *******************

SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4             192  ---  Lifetime Power-On Resets
0x01  0x010  4           29873  ---  Power-on Hours
0x01  0x018  6     76034158082  ---  Logical Sectors Written
0x01  0x020  6       524308178  ---  Number of Write Commands
0x01  0x028  6   3464202644536  ---  Logical Sectors Read
0x01  0x030  6      3536974515  ---  Number of Read Commands
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4           29772  ---  Spindle Motor Power-on Hours
0x03  0x010  4           29772  ---  Head Flying Hours
0x03  0x018  4            1034  ---  Head Load Events
0x03  0x020  4               2  ---  Number of Reallocated Logical Sectors
0x03  0x028  4            3101  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4             369  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              38  ---  Current Temperature
0x05  0x010  1              37  N--  Average Short Term Temperature
0x05  0x018  1              37  N--  Average Long Term Temperature
0x05  0x020  1              68  ---  Highest Temperature
0x05  0x028  1              20  ---  Lowest Temperature
0x05  0x030  1              49  N--  Highest Average Short Term Temperature
0x05  0x038  1               0  N--  Lowest Average Short Term Temperature
0x05  0x040  1              46  N--  Highest Average Long Term Temperature
0x05  0x048  1               0  N--  Lowest Average Long Term Temperature
0x05  0x050  4             140  ---  Time in Over-Temperature
0x05  0x058  1              60  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4            2377  ---  Number of Hardware Resets
0x06  0x010  4            1383  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0009  2            5  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            6  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

debug finished in 8 seconds for SMART - 'smartctl -x'
command used:
/usr/local/bin/../libexec/freenas-debug/smart.sh


