+--------------------------------------------------------------------------------+
+                       SMART - 'smartctl -x' @1517014491                        +
+--------------------------------------------------------------------------------+
/dev/ada3
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Green
Device Model:     WDC WD20EZRX-00D8PB0
Serial Number:    WD-WMC4M2245521
LU WWN Device Id: 5 0014ee 0590b9c41
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jan 26 18:54:51 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(27240) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 275) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   172   171   021    -    4383
  4 Start_Stop_Count        -O--CK   100   100   000    -    126
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   058   058   000    -    31301
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    115
192 Power-Off_Retract_Count -O--CK   200   200   000    -    79
193 Load_Cycle_Count        -O--CK   001   001   000    -    1123632
194 Temperature_Celsius     -O---K   118   106   000    -    29
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     27425         -
# 2  Extended offline    Completed without error       00%     27333         -
# 3  Short offline       Completed without error       00%     27257         -
# 4  Short offline       Completed without error       00%     27018         -
# 5  Extended offline    Completed without error       00%     26926         -
# 6  Short offline       Completed without error       00%     26850         -
# 7  Short offline       Completed without error       00%     26682         -
# 8  Extended offline    Completed without error       00%     26590         -
# 9  Short offline       Completed without error       00%     26525         -
#10  Short offline       Completed without error       00%     26312         -
#11  Extended offline    Completed without error       00%     26220         -
#12  Short offline       Completed without error       00%     26153         -
#13  Short offline       Completed without error       00%     25989         -
#14  Short offline       Completed without error       00%     25759         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    29 Celsius
Power Cycle Min/Max Temperature:     18/32 Celsius
Lifetime    Min/Max Temperature:      2/41 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (51)

Index    Estimated Time   Temperature Celsius
  52    2018-01-26 10:57    28  *********
 ...    ..( 12 skipped).    ..  *********
  65    2018-01-26 11:10    28  *********
  66    2018-01-26 11:11    29  **********
  67    2018-01-26 11:12    28  *********
 ...    ..(  8 skipped).    ..  *********
  76    2018-01-26 11:21    28  *********
  77    2018-01-26 11:22    29  **********
  78    2018-01-26 11:23    28  *********
 ...    ..(  6 skipped).    ..  *********
  85    2018-01-26 11:30    28  *********
  86    2018-01-26 11:31    29  **********
  87    2018-01-26 11:32    28  *********
  88    2018-01-26 11:33    28  *********
  89    2018-01-26 11:34    29  **********
 ...    ..(405 skipped).    ..  **********
  17    2018-01-26 18:20    29  **********
  18    2018-01-26 18:21    28  *********
 ...    ..( 32 skipped).    ..  *********
  51    2018-01-26 18:54    28  *********

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           14  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           15  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       948627  Vendor specific

/dev/ada2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD20EZRZ-00Z5HB0
Serial Number:    WD-WCC4M3TFC6PS
LU WWN Device Id: 5 0014ee 263b2bf67
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jan 26 18:54:52 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(25320) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 256) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   172   172   021    -    4391
  4 Start_Stop_Count        -O--CK   100   100   000    -    86
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   093   093   000    -    5597
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    86
192 Power-Off_Retract_Count -O--CK   200   200   000    -    54
193 Load_Cycle_Count        -O--CK   001   001   000    -    907065
194 Temperature_Celsius     -O---K   118   111   000    -    29
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      39  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1722         -
# 2  Extended offline    Completed without error       00%      1630         -
# 3  Short offline       Completed without error       00%      1554         -
# 4  Short offline       Completed without error       00%      1314         -
# 5  Extended offline    Completed without error       00%      1222         -
# 6  Short offline       Completed without error       00%      1147         -
# 7  Short offline       Completed without error       00%       979         -
# 8  Extended offline    Completed without error       00%       887         -
# 9  Short offline       Completed without error       00%       822         -
#10  Short offline       Completed without error       00%       608         -
#11  Extended offline    Completed without error       00%       516         -
#12  Short offline       Completed without error       00%       450         -
#13  Short offline       Completed without error       00%       286         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    29 Celsius
Power Cycle Min/Max Temperature:     19/32 Celsius
Lifetime    Min/Max Temperature:     19/36 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (64)

Index    Estimated Time   Temperature Celsius
  65    2018-01-26 10:57    29  **********
 ...    ..(248 skipped).    ..  **********
 314    2018-01-26 15:06    29  **********
 315    2018-01-26 15:07    28  *********
 ...    ..( 39 skipped).    ..  *********
 355    2018-01-26 15:47    28  *********
 356    2018-01-26 15:48    29  **********
 357    2018-01-26 15:49    28  *********
 ...    ..(  4 skipped).    ..  *********
 362    2018-01-26 15:54    28  *********
 363    2018-01-26 15:55    29  **********
 364    2018-01-26 15:56    28  *********
 ...    ..(  2 skipped).    ..  *********
 367    2018-01-26 15:59    28  *********
 368    2018-01-26 16:00    29  **********
 ...    ..(  8 skipped).    ..  **********
 377    2018-01-26 16:09    29  **********
 378    2018-01-26 16:10    28  *********
 379    2018-01-26 16:11    29  **********
 ...    ..( 46 skipped).    ..  **********
 426    2018-01-26 16:58    29  **********
 427    2018-01-26 16:59    28  *********
 428    2018-01-26 17:00    29  **********
 ...    ..(113 skipped).    ..  **********
  64    2018-01-26 18:54    29  **********

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           14  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           15  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       948618  Vendor specific

/dev/ada1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD20EZRZ-00Z5HB0
Serial Number:    WD-WCC4M1LA9D8P
LU WWN Device Id: 5 0014ee 263fd10a9
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jan 26 18:54:52 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(26940) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 272) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   175   021    -    4191
  4 Start_Stop_Count        -O--CK   100   100   000    -    89
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   093   093   000    -    5610
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    89
192 Power-Off_Retract_Count -O--CK   200   200   000    -    54
193 Load_Cycle_Count        -O--CK   001   001   000    -    908523
194 Temperature_Celsius     -O---K   116   109   000    -    31
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   196   000    -    17
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      39  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1734         -
# 2  Extended offline    Completed without error       00%      1643         -
# 3  Short offline       Completed without error       00%      1567         -
# 4  Short offline       Completed without error       00%      1327         -
# 5  Extended offline    Completed without error       00%      1235         -
# 6  Short offline       Completed without error       00%      1159         -
# 7  Short offline       Completed without error       00%       991         -
# 8  Extended offline    Completed without error       00%       900         -
# 9  Short offline       Completed without error       00%       835         -
#10  Short offline       Completed without error       00%       621         -
#11  Extended offline    Completed without error       00%       529         -
#12  Short offline       Completed without error       00%       463         -
#13  Short offline       Completed without error       00%       298         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    31 Celsius
Power Cycle Min/Max Temperature:     19/34 Celsius
Lifetime    Min/Max Temperature:     19/38 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (151)

Index    Estimated Time   Temperature Celsius
 152    2018-01-26 10:57    30  ***********
 ...    ..(101 skipped).    ..  ***********
 254    2018-01-26 12:39    30  ***********
 255    2018-01-26 12:40    31  ************
 256    2018-01-26 12:41    30  ***********
 257    2018-01-26 12:42    31  ************
 258    2018-01-26 12:43    31  ************
 259    2018-01-26 12:44    30  ***********
 260    2018-01-26 12:45    30  ***********
 261    2018-01-26 12:46    31  ************
 262    2018-01-26 12:47    31  ************
 263    2018-01-26 12:48    30  ***********
 264    2018-01-26 12:49    31  ************
 265    2018-01-26 12:50    30  ***********
 266    2018-01-26 12:51    30  ***********
 267    2018-01-26 12:52    31  ************
 268    2018-01-26 12:53    30  ***********
 269    2018-01-26 12:54    30  ***********
 270    2018-01-26 12:55    31  ************
 271    2018-01-26 12:56    31  ************
 272    2018-01-26 12:57    31  ************
 273    2018-01-26 12:58    30  ***********
 274    2018-01-26 12:59    30  ***********
 275    2018-01-26 13:00    31  ************
 276    2018-01-26 13:01    31  ************
 277    2018-01-26 13:02    30  ***********
 278    2018-01-26 13:03    31  ************
 279    2018-01-26 13:04    30  ***********
 280    2018-01-26 13:05    31  ************
 281    2018-01-26 13:06    30  ***********
 282    2018-01-26 13:07    31  ************
 283    2018-01-26 13:08    30  ***********
 284    2018-01-26 13:09    31  ************
 ...    ..( 21 skipped).    ..  ************
 306    2018-01-26 13:31    31  ************
 307    2018-01-26 13:32    30  ***********
 308    2018-01-26 13:33    31  ************
 ...    ..(  3 skipped).    ..  ************
 312    2018-01-26 13:37    31  ************
 313    2018-01-26 13:38    30  ***********
 314    2018-01-26 13:39    31  ************
 ...    ..( 10 skipped).    ..  ************
 325    2018-01-26 13:50    31  ************
 326    2018-01-26 13:51    30  ***********
 327    2018-01-26 13:52    31  ************
 328    2018-01-26 13:53    31  ************
 329    2018-01-26 13:54    30  ***********
 330    2018-01-26 13:55    30  ***********
 331    2018-01-26 13:56    31  ************
 332    2018-01-26 13:57    30  ***********
 333    2018-01-26 13:58    31  ************
 334    2018-01-26 13:59    30  ***********
 335    2018-01-26 14:00    30  ***********
 336    2018-01-26 14:01    30  ***********
 337    2018-01-26 14:02    31  ************
 338    2018-01-26 14:03    30  ***********
 ...    ..(  7 skipped).    ..  ***********
 346    2018-01-26 14:11    30  ***********
 347    2018-01-26 14:12    31  ************
 348    2018-01-26 14:13    30  ***********
 349    2018-01-26 14:14    31  ************
 350    2018-01-26 14:15    30  ***********
 ...    ..( 36 skipped).    ..  ***********
 387    2018-01-26 14:52    30  ***********
 388    2018-01-26 14:53    31  ************
 389    2018-01-26 14:54    30  ***********
 390    2018-01-26 14:55    30  ***********
 391    2018-01-26 14:56    31  ************
 ...    ..(  9 skipped).    ..  ************
 401    2018-01-26 15:06    31  ************
 402    2018-01-26 15:07    29  **********
 ...    ..(141 skipped).    ..  **********
  66    2018-01-26 17:29    29  **********
  67    2018-01-26 17:30    30  ***********
  68    2018-01-26 17:31    29  **********
  69    2018-01-26 17:32    30  ***********
 ...    ..(  3 skipped).    ..  ***********
  73    2018-01-26 17:36    30  ***********
  74    2018-01-26 17:37    29  **********
  75    2018-01-26 17:38    29  **********
  76    2018-01-26 17:39    30  ***********
  77    2018-01-26 17:40    29  **********
  78    2018-01-26 17:41    29  **********
  79    2018-01-26 17:42    29  **********
  80    2018-01-26 17:43    30  ***********
 ...    ..( 13 skipped).    ..  ***********
  94    2018-01-26 17:57    30  ***********
  95    2018-01-26 17:58    29  **********
  96    2018-01-26 17:59    30  ***********
  97    2018-01-26 18:00    29  **********
 ...    ..(  3 skipped).    ..  **********
 101    2018-01-26 18:04    29  **********
 102    2018-01-26 18:05    30  ***********
 ...    ..(  2 skipped).    ..  ***********
 105    2018-01-26 18:08    30  ***********
 106    2018-01-26 18:09    29  **********
 107    2018-01-26 18:10    30  ***********
 ...    ..( 43 skipped).    ..  ***********
 151    2018-01-26 18:54    30  ***********

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           14  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           15  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       948633  Vendor specific

/dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD20EZRZ-00Z5HB0
Serial Number:    WD-WCC4N6XJ8CFS
LU WWN Device Id: 5 0014ee 2b9206cac
Firmware Version: 80.00A80
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jan 26 18:54:53 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(31440) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 317) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   183   178   021    -    5808
  4 Start_Stop_Count        -O--CK   100   100   000    -    79
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   093   093   000    -    5496
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    79
192 Power-Off_Retract_Count -O--CK   200   200   000    -    52
193 Load_Cycle_Count        -O--CK   001   001   000    -    894319
194 Temperature_Celsius     -O---K   120   113   000    -    30
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      39  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1620         -
# 2  Extended offline    Completed without error       00%      1529         -
# 3  Short offline       Completed without error       00%      1452         -
# 4  Short offline       Completed without error       00%      1213         -
# 5  Short offline       Completed without error       00%      1045         -
# 6  Short offline       Completed without error       00%       877         -
# 7  Extended offline    Completed without error       00%       786         -
# 8  Short offline       Completed without error       00%       720         -
# 9  Short offline       Completed without error       00%       507         -
#10  Extended offline    Completed without error       00%       416         -
#11  Short offline       Completed without error       00%       348         -
#12  Short offline       Completed without error       00%       184         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    30 Celsius
Power Cycle Min/Max Temperature:     19/33 Celsius
Lifetime    Min/Max Temperature:      2/37 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (180)

Index    Estimated Time   Temperature Celsius
 181    2018-01-26 10:57    29  **********
 ...    ..( 20 skipped).    ..  **********
 202    2018-01-26 11:18    29  **********
 203    2018-01-26 11:19    30  ***********
 204    2018-01-26 11:20    30  ***********
 205    2018-01-26 11:21    29  **********
 206    2018-01-26 11:22    29  **********
 207    2018-01-26 11:23    29  **********
 208    2018-01-26 11:24    30  ***********
 209    2018-01-26 11:25    29  **********
 210    2018-01-26 11:26    29  **********
 211    2018-01-26 11:27    30  ***********
 212    2018-01-26 11:28    29  **********
 ...    ..(  4 skipped).    ..  **********
 217    2018-01-26 11:33    29  **********
 218    2018-01-26 11:34    30  ***********
 219    2018-01-26 11:35    29  **********
 ...    ..(  2 skipped).    ..  **********
 222    2018-01-26 11:38    29  **********
 223    2018-01-26 11:39    30  ***********
 224    2018-01-26 11:40    29  **********
 225    2018-01-26 11:41    30  ***********
 ...    ..(204 skipped).    ..  ***********
 430    2018-01-26 15:06    30  ***********
 431    2018-01-26 15:07    29  **********
 ...    ..(226 skipped).    ..  **********
 180    2018-01-26 18:54    29  **********

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           15  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           15  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       948622  Vendor specific

/dev/da4
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da4: Unknown USB bridge [0x0781:0x5583 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da3
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da3: Unknown USB bridge [0x0bda:0x0181 (0x8197)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da2: Unknown USB bridge [0x0bda:0x0181 (0x8197)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da1: Unknown USB bridge [0x0bda:0x0181 (0x8197)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown USB bridge [0x0bda:0x0181 (0x8197)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

debug finished in 3 seconds for SMART - 'smartctl -x'
command used:
/usr/local/www/smart.sh


