+--------------------------------------------------------------------------------+
+                               SMART @1514948873                                +
+--------------------------------------------------------------------------------+
/dev/da0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown USB bridge [0x0781:0x5590 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/ada3
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD60EFRX-68L0BN1
Serial Number:    WD-WX31DB58Y918
LU WWN Device Id: 5 0014ee 20d3cf6bd
Firmware Version: 82.00A82
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan  2 19:07:53 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 6824) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 722) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   197   197   021    -    9133
  4 Start_Stop_Count        -O--CK   100   100   000    -    18
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   084   084   000    -    12136
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    18
192 Power-Off_Retract_Count -O--CK   200   200   000    -    11
193 Load_Cycle_Count        -O--CK   200   200   000    -    80
194 Temperature_Celsius     -O---K   111   097   000    -    41
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      54  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 2
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 [1] occurred at disk power-on lifetime: 10785 hours (449 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 64 5b c5 80 40 00  Error: UNC at LBA = 0x1645bc580 = 5978703232

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 58 00 a8 00 01 64 5b c6 30 40 08 48d+09:12:11.863  READ FPDMA QUEUED
  60 00 b0 00 a0 00 01 64 5b c5 80 40 08 48d+09:12:11.863  READ FPDMA QUEUED
  60 00 b0 00 98 00 01 64 5b c4 d0 40 08 48d+09:12:11.862  READ FPDMA QUEUED
  60 00 b0 00 90 00 01 64 5b c4 20 40 08 48d+09:12:11.851  READ FPDMA QUEUED
  60 00 b0 00 88 00 01 64 5b c3 70 40 08 48d+09:12:11.851  READ FPDMA QUEUED

Error 1 [0] occurred at disk power-on lifetime: 10772 hours (448 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 5c 19 b8 d0 40 00  Error: UNC at LBA = 0x5c19b8d0 = 1545189584

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 98 00 00 5c 19 b9 80 40 08 47d+20:00:59.767  READ FPDMA QUEUED
  60 00 b0 00 90 00 00 5c 19 b8 d0 40 08 47d+20:00:59.767  READ FPDMA QUEUED
  60 00 b0 00 88 00 00 5c 19 b8 20 40 08 47d+20:00:59.766  READ FPDMA QUEUED
  60 00 b0 00 80 00 00 5c 19 b7 70 40 08 47d+20:00:59.755  READ FPDMA QUEUED
  60 00 b0 00 78 00 00 5c 19 b6 c0 40 08 47d+20:00:59.755  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    41 Celsius
Power Cycle Min/Max Temperature:     22/41 Celsius
Lifetime    Min/Max Temperature:     16/55 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (106)

Index    Estimated Time   Temperature Celsius
 107    2018-01-02 11:10    30  ***********
 108    2018-01-02 11:11    31  ************
 109    2018-01-02 11:12    31  ************
 110    2018-01-02 11:13    31  ************
 111    2018-01-02 11:14    32  *************
 ...    ..(  2 skipped).    ..  *************
 114    2018-01-02 11:17    32  *************
 115    2018-01-02 11:18    33  **************
 ...    ..(  2 skipped).    ..  **************
 118    2018-01-02 11:21    33  **************
 119    2018-01-02 11:22    34  ***************
 ...    ..(  3 skipped).    ..  ***************
 123    2018-01-02 11:26    34  ***************
 124    2018-01-02 11:27    35  ****************
 ...    ..(  3 skipped).    ..  ****************
 128    2018-01-02 11:31    35  ****************
 129    2018-01-02 11:32    36  *****************
 ...    ..(  4 skipped).    ..  *****************
 134    2018-01-02 11:37    36  *****************
 135    2018-01-02 11:38    37  ******************
 ...    ..(  4 skipped).    ..  ******************
 140    2018-01-02 11:43    37  ******************
 141    2018-01-02 11:44    38  *******************
 ...    ..(  7 skipped).    ..  *******************
 149    2018-01-02 11:52    38  *******************
 150    2018-01-02 11:53    39  ********************
 ...    ..(  7 skipped).    ..  ********************
 158    2018-01-02 12:01    39  ********************
 159    2018-01-02 12:02    40  *********************
 ...    ..(  9 skipped).    ..  *********************
 169    2018-01-02 12:12    40  *********************
 170    2018-01-02 12:13    41  **********************
 ...    ..( 75 skipped).    ..  **********************
 246    2018-01-02 13:29    41  **********************
 247    2018-01-02 13:30    42  ***********************
 ...    ..(313 skipped).    ..  ***********************
  83    2018-01-02 18:44    42  ***********************
  84    2018-01-02 18:45     ?  -
  85    2018-01-02 18:46    22  ***
  86    2018-01-02 18:47    22  ***
  87    2018-01-02 18:48    22  ***
  88    2018-01-02 18:49    23  ****
  89    2018-01-02 18:50    23  ****
  90    2018-01-02 18:51    24  *****
  91    2018-01-02 18:52    24  *****
  92    2018-01-02 18:53    25  ******
  93    2018-01-02 18:54    25  ******
  94    2018-01-02 18:55    26  *******
  95    2018-01-02 18:56    26  *******
  96    2018-01-02 18:57    26  *******
  97    2018-01-02 18:58    27  ********
  98    2018-01-02 18:59    27  ********
  99    2018-01-02 19:00    28  *********
 100    2018-01-02 19:01    28  *********
 101    2018-01-02 19:02    28  *********
 102    2018-01-02 19:03    29  **********
 103    2018-01-02 19:04    29  **********
 104    2018-01-02 19:05    29  **********
 105    2018-01-02 19:06    30  ***********
 106    2018-01-02 19:07    30  ***********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            2  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         5639  Vendor specific

/dev/ada2
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD60EFRX-68L0BN1
Serial Number:    WD-WX31DB58Y6XX
LU WWN Device Id: 5 0014ee 20d3d10b7
Firmware Version: 82.00A82
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan  2 19:07:53 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 7184) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 725) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   197   197   021    -    9150
  4 Start_Stop_Count        -O--CK   100   100   000    -    18
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   084   084   000    -    12136
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    18
192 Power-Off_Retract_Count -O--CK   200   200   000    -    11
193 Load_Cycle_Count        -O--CK   200   200   000    -    88
194 Temperature_Celsius     -O---K   118   105   000    -    34
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      54  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 3
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 [2] occurred at disk power-on lifetime: 9773 hours (407 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 4d ab 0f 50 40 00  Error: UNC at LBA = 0x14dab0f50 = 5598023504

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 e0 00 01 4d ab 10 00 40 08  6d+05:11:45.201  READ FPDMA QUEUED
  60 00 b0 00 d8 00 01 4d ab 0f 50 40 08  6d+05:11:45.201  READ FPDMA QUEUED
  60 00 b0 00 d0 00 01 4d ab 0e a0 40 08  6d+05:11:45.189  READ FPDMA QUEUED
  60 00 b0 00 c8 00 01 4d ab 0d f0 40 08  6d+05:11:45.189  READ FPDMA QUEUED
  60 00 b0 00 c0 00 01 4d ab 0d 40 40 08  6d+05:11:45.178  READ FPDMA QUEUED

Error 2 [1] occurred at disk power-on lifetime: 9769 hours (407 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 23 fb 36 f0 40 00  Error: UNC at LBA = 0x123fb36f0 = 4898633456

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 58 00 e8 00 00 2a a8 ff 60 40 08  6d+00:59:47.046  READ FPDMA QUEUED
  60 00 58 00 e0 00 00 2a a8 ff 08 40 08  6d+00:59:45.897  READ FPDMA QUEUED
  60 00 58 00 d8 00 00 2a a8 fe b0 40 08  6d+00:59:44.964  READ FPDMA QUEUED
  60 00 d8 00 d0 00 01 23 fb 37 c0 40 08  6d+00:59:42.110  READ FPDMA QUEUED
  60 00 d0 00 c8 00 01 23 fb 36 f0 40 08  6d+00:59:42.110  READ FPDMA QUEUED

Error 1 [0] occurred at disk power-on lifetime: 5889 hours (245 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 f4 22 62 18 40 00  Error: UNC at LBA = 0x1f4226218 = 8390861336

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 78 00 01 f4 22 62 c8 40 08  2d+00:43:07.079  READ FPDMA QUEUED
  60 00 b0 00 70 00 01 f4 22 62 18 40 08  2d+00:43:07.079  READ FPDMA QUEUED
  60 00 b0 00 68 00 01 f4 22 61 68 40 08  2d+00:43:07.078  READ FPDMA QUEUED
  60 00 b0 00 60 00 01 f4 22 60 b8 40 08  2d+00:43:07.077  READ FPDMA QUEUED
  60 00 b0 00 58 00 01 f4 22 60 08 40 08  2d+00:43:07.076  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    34 Celsius
Power Cycle Min/Max Temperature:     23/34 Celsius
Lifetime    Min/Max Temperature:     16/47 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (116)

Index    Estimated Time   Temperature Celsius
 117    2018-01-02 11:10    29  **********
 118    2018-01-02 11:11    29  **********
 119    2018-01-02 11:12    30  ***********
 ...    ..(  4 skipped).    ..  ***********
 124    2018-01-02 11:17    30  ***********
 125    2018-01-02 11:18    31  ************
 ...    ..(  6 skipped).    ..  ************
 132    2018-01-02 11:25    31  ************
 133    2018-01-02 11:26    32  *************
 ...    ..( 11 skipped).    ..  *************
 145    2018-01-02 11:38    32  *************
 146    2018-01-02 11:39    33  **************
 ...    ..( 22 skipped).    ..  **************
 169    2018-01-02 12:02    33  **************
 170    2018-01-02 12:03    34  ***************
 ...    ..( 17 skipped).    ..  ***************
 188    2018-01-02 12:21    34  ***************
 189    2018-01-02 12:22    33  **************
 ...    ..( 58 skipped).    ..  **************
 248    2018-01-02 13:21    33  **************
 249    2018-01-02 13:22    34  ***************
 ...    ..(321 skipped).    ..  ***************
  93    2018-01-02 18:44    34  ***************
  94    2018-01-02 18:45     ?  -
  95    2018-01-02 18:46    23  ****
  96    2018-01-02 18:47    23  ****
  97    2018-01-02 18:48    23  ****
  98    2018-01-02 18:49    24  *****
  99    2018-01-02 18:50    24  *****
 100    2018-01-02 18:51    25  ******
 101    2018-01-02 18:52    25  ******
 102    2018-01-02 18:53    25  ******
 103    2018-01-02 18:54    26  *******
 104    2018-01-02 18:55    26  *******
 105    2018-01-02 18:56    26  *******
 106    2018-01-02 18:57    27  ********
 107    2018-01-02 18:58    27  ********
 108    2018-01-02 18:59    27  ********
 109    2018-01-02 19:00    28  *********
 ...    ..(  2 skipped).    ..  *********
 112    2018-01-02 19:03    28  *********
 113    2018-01-02 19:04    29  **********
 ...    ..(  2 skipped).    ..  **********
 116    2018-01-02 19:07    29  **********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            2  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         5640  Vendor specific

/dev/ada1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD60EFRX-68L0BN1
Serial Number:    WD-WXB1HB4X697T
LU WWN Device Id: 5 0014ee 2b7a5366c
Firmware Version: 82.00A82
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan  2 19:07:53 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 6524) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 719) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   197   196   021    -    9133
  4 Start_Stop_Count        -O--CK   100   100   000    -    38
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   084   084   000    -    12159
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    38
192 Power-Off_Retract_Count -O--CK   200   200   000    -    31
193 Load_Cycle_Count        -O--CK   200   200   000    -    132
194 Temperature_Celsius     -O---K   113   099   000    -    39
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      40  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    39 Celsius
Power Cycle Min/Max Temperature:     21/39 Celsius
Lifetime    Min/Max Temperature:      2/53 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (102)

Index    Estimated Time   Temperature Celsius
 103    2018-01-02 11:10    30  ***********
 104    2018-01-02 11:11    30  ***********
 105    2018-01-02 11:12    30  ***********
 106    2018-01-02 11:13    31  ************
 ...    ..(  2 skipped).    ..  ************
 109    2018-01-02 11:16    31  ************
 110    2018-01-02 11:17    32  *************
 ...    ..(  2 skipped).    ..  *************
 113    2018-01-02 11:20    32  *************
 114    2018-01-02 11:21    33  **************
 ...    ..(  3 skipped).    ..  **************
 118    2018-01-02 11:25    33  **************
 119    2018-01-02 11:26    34  ***************
 ...    ..(  3 skipped).    ..  ***************
 123    2018-01-02 11:30    34  ***************
 124    2018-01-02 11:31    35  ****************
 ...    ..(  5 skipped).    ..  ****************
 130    2018-01-02 11:37    35  ****************
 131    2018-01-02 11:38    36  *****************
 ...    ..(  5 skipped).    ..  *****************
 137    2018-01-02 11:44    36  *****************
 138    2018-01-02 11:45    37  ******************
 ...    ..(  7 skipped).    ..  ******************
 146    2018-01-02 11:53    37  ******************
 147    2018-01-02 11:54    38  *******************
 ...    ..( 13 skipped).    ..  *******************
 161    2018-01-02 12:08    38  *******************
 162    2018-01-02 12:09    39  ********************
 ...    ..( 13 skipped).    ..  ********************
 176    2018-01-02 12:23    39  ********************
 177    2018-01-02 12:24    40  *********************
 ...    ..(379 skipped).    ..  *********************
  79    2018-01-02 18:44    40  *********************
  80    2018-01-02 18:45     ?  -
  81    2018-01-02 18:46    21  **
  82    2018-01-02 18:47    21  **
  83    2018-01-02 18:48    22  ***
  84    2018-01-02 18:49    22  ***
  85    2018-01-02 18:50    23  ****
  86    2018-01-02 18:51    23  ****
  87    2018-01-02 18:52    24  *****
  88    2018-01-02 18:53    24  *****
  89    2018-01-02 18:54    25  ******
  90    2018-01-02 18:55    25  ******
  91    2018-01-02 18:56    26  *******
  92    2018-01-02 18:57    26  *******
  93    2018-01-02 18:58    26  *******
  94    2018-01-02 18:59    27  ********
  95    2018-01-02 19:00    27  ********
  96    2018-01-02 19:01    27  ********
  97    2018-01-02 19:02    28  *********
  98    2018-01-02 19:03    28  *********
  99    2018-01-02 19:04    29  **********
 ...    ..(  2 skipped).    ..  **********
 102    2018-01-02 19:07    29  **********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            2  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         5640  Vendor specific

/dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD60EFRX-68L0BN1
Serial Number:    WD-WXB1HB4Z9PYH
LU WWN Device Id: 5 0014ee 20d3cffa1
Firmware Version: 82.00A82
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5700 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jan  2 19:07:53 2018 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 6164) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 715) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   197   197   021    -    9108
  4 Start_Stop_Count        -O--CK   100   100   000    -    18
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   084   084   000    -    12136
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    18
192 Power-Off_Retract_Count -O--CK   200   200   000    -    11
193 Load_Cycle_Count        -O--CK   200   200   000    -    87
194 Temperature_Celsius     -O---K   109   096   000    -    43
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      54  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 4
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 [3] occurred at disk power-on lifetime: 11597 hours (483 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 01 e8 22 27 58 40 00  Error: UNC at LBA = 0x1e8222758 = 8189519704

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 78 00 01 e8 22 28 08 40 08  3d+18:16:45.298  READ FPDMA QUEUED
  60 00 b0 00 70 00 01 e8 22 27 58 40 08  3d+18:16:45.297  READ FPDMA QUEUED
  60 00 b0 00 68 00 01 e8 22 26 a8 40 08  3d+18:16:45.296  READ FPDMA QUEUED
  60 00 b0 00 60 00 01 e8 22 25 f8 40 08  3d+18:16:45.285  READ FPDMA QUEUED
  60 00 b0 00 58 00 01 e8 22 25 48 40 08  3d+18:16:45.285  READ FPDMA QUEUED

Error 3 [2] occurred at disk power-on lifetime: 11595 hours (483 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 02 75 2e 2f d0 40 00  Error: UNC at LBA = 0x2752e2fd0 = 10555895760

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 58 00 98 00 02 75 2e 30 80 40 08  3d+16:18:33.108  READ FPDMA QUEUED
  60 00 b0 00 90 00 02 75 2e 2f d0 40 08  3d+16:18:33.108  READ FPDMA QUEUED
  60 00 b0 00 88 00 02 75 2e 2f 20 40 08  3d+16:18:33.106  READ FPDMA QUEUED
  60 00 b0 00 80 00 02 75 2e 2e 70 40 08  3d+16:18:33.106  READ FPDMA QUEUED
  60 00 b0 00 78 00 02 75 2e 2d c0 40 08  3d+16:18:33.104  READ FPDMA QUEUED

Error 2 [1] occurred at disk power-on lifetime: 11593 hours (483 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 02 8d 5b 00 c0 40 00  Error: UNC at LBA = 0x28d5b00c0 = 10961486016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 98 00 02 8d 5b 01 70 40 08  3d+13:38:42.181  READ FPDMA QUEUED
  60 00 b0 00 90 00 02 8d 5b 00 c0 40 08  3d+13:38:42.181  READ FPDMA QUEUED
  60 00 b0 00 88 00 02 8d 5b 00 10 40 08  3d+13:38:42.179  READ FPDMA QUEUED
  60 00 b0 00 80 00 02 8d 5a ff 60 40 08  3d+13:38:42.168  READ FPDMA QUEUED
  60 00 b0 00 78 00 02 8d 5a fe b0 40 08  3d+13:38:42.168  READ FPDMA QUEUED

Error 1 [0] occurred at disk power-on lifetime: 8771 hours (365 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 02 8d 5b 00 c0 40 00  Error: UNC at LBA = 0x28d5b00c0 = 10961486016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 b0 00 e0 00 02 8d 5b 01 70 40 08 27d+12:41:23.855  READ FPDMA QUEUED
  60 00 b0 00 d8 00 02 8d 5b 00 c0 40 08 27d+12:41:23.855  READ FPDMA QUEUED
  60 00 b0 00 d0 00 02 8d 5b 00 10 40 08 27d+12:41:23.853  READ FPDMA QUEUED
  60 00 b0 00 c8 00 02 8d 5a ff 60 40 08 27d+12:41:23.842  READ FPDMA QUEUED
  60 00 b0 00 c0 00 02 8d 5a fe b0 40 08 27d+12:41:23.842  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    42 Celsius
Power Cycle Min/Max Temperature:     22/42 Celsius
Lifetime    Min/Max Temperature:     15/56 Celsius
Under/Over Temperature Limit Count:   0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (113)

Index    Estimated Time   Temperature Celsius
 114    2018-01-02 11:10    30  ***********
 115    2018-01-02 11:11    31  ************
 116    2018-01-02 11:12    31  ************
 117    2018-01-02 11:13    31  ************
 118    2018-01-02 11:14    32  *************
 119    2018-01-02 11:15    32  *************
 120    2018-01-02 11:16    33  **************
 ...    ..(  2 skipped).    ..  **************
 123    2018-01-02 11:19    33  **************
 124    2018-01-02 11:20    34  ***************
 ...    ..(  2 skipped).    ..  ***************
 127    2018-01-02 11:23    34  ***************
 128    2018-01-02 11:24    35  ****************
 ...    ..(  3 skipped).    ..  ****************
 132    2018-01-02 11:28    35  ****************
 133    2018-01-02 11:29    36  *****************
 ...    ..(  2 skipped).    ..  *****************
 136    2018-01-02 11:32    36  *****************
 137    2018-01-02 11:33    37  ******************
 ...    ..(  3 skipped).    ..  ******************
 141    2018-01-02 11:37    37  ******************
 142    2018-01-02 11:38    38  *******************
 ...    ..(  4 skipped).    ..  *******************
 147    2018-01-02 11:43    38  *******************
 148    2018-01-02 11:44    39  ********************
 ...    ..(  5 skipped).    ..  ********************
 154    2018-01-02 11:50    39  ********************
 155    2018-01-02 11:51    40  *********************
 ...    ..(  5 skipped).    ..  *********************
 161    2018-01-02 11:57    40  *********************
 162    2018-01-02 11:58    41  **********************
 ...    ..( 10 skipped).    ..  **********************
 173    2018-01-02 12:09    41  **********************
 174    2018-01-02 12:10    42  ***********************
 ...    ..( 10 skipped).    ..  ***********************
 185    2018-01-02 12:21    42  ***********************
 186    2018-01-02 12:22    43  ************************
 ...    ..(111 skipped).    ..  ************************
 298    2018-01-02 14:14    43  ************************
 299    2018-01-02 14:15    44  *************************
 ...    ..(268 skipped).    ..  *************************
  90    2018-01-02 18:44    44  *************************
  91    2018-01-02 18:45     ?  -
  92    2018-01-02 18:46    22  ***
 ...    ..(  2 skipped).    ..  ***
  95    2018-01-02 18:49    22  ***
  96    2018-01-02 18:50    23  ****
  97    2018-01-02 18:51    23  ****
  98    2018-01-02 18:52    24  *****
  99    2018-01-02 18:53    24  *****
 100    2018-01-02 18:54    25  ******
 101    2018-01-02 18:55    25  ******
 102    2018-01-02 18:56    26  *******
 103    2018-01-02 18:57    26  *******
 104    2018-01-02 18:58    27  ********
 105    2018-01-02 18:59    27  ********
 106    2018-01-02 19:00    28  *********
 107    2018-01-02 19:01    28  *********
 108    2018-01-02 19:02    28  *********
 109    2018-01-02 19:03    29  **********
 110    2018-01-02 19:04    29  **********
 111    2018-01-02 19:05    30  ***********
 112    2018-01-02 19:06    30  ***********
 113    2018-01-02 19:07    30  ***********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            2  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         5640  Vendor specific

debug finished in 0 seconds for SMART


