+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD1600AVBS-63SVA0
Serial Number:    WD-WCAP90407075
LU WWN Device Id: 5 0014ee 1003c70dd
Firmware Version: 05.06H05
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Sat Aug 29 08:06:51 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 4200) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  56) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   100   253   051    -    0
  3 Spin_Up_Time            PO----   165   165   021    -    2733
  4 Start_Stop_Count        -O--CK   100   100   000    -    8
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR--   200   200   051    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    6
 10 Spin_Retry_Count        -O--C-   100   253   051    -    0
 11 Calibration_Retry_Count -O--C-   100   253   051    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    7
190 Airflow_Temperature_Cel -O---K   070   059   040    -    30
192 Power-Off_Retract_Count -O--CK   200   200   000    -    3
193 Load_Cycle_Count        -O--CK   200   200   000    -    8
194 Temperature_Celsius     -O---K   113   102   000    -    30
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--C-   200   200   000    -    0
198 Offline_Uncorrectable   ----C-   100   253   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   051    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x09           SL  R/W      1  Selective self-test log
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xa0-0xa7      SL  VS      16  Device vendor specific log
0xa8-0xb7      SL  VS       1  Device vendor specific log
0xc0           SL  VS       1  Device vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    30 Celsius
Power Cycle Min/Max Temperature:     26/31 Celsius
Lifetime    Min/Max Temperature:     23/41 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      5/60 Celsius
Min/Max Temperature Limit:            1/85 Celsius
Temperature History Size (Index):    128 (124)

Index    Estimated Time   Temperature Celsius
 125    2015-08-29 05:59    41  **********************
 ...    ..( 78 skipped).    ..  **********************
  76    2015-08-29 07:18    41  **********************
  77    2015-08-29 07:19    40  *********************
 ...    ..(  2 skipped).    ..  *********************
  80    2015-08-29 07:22    40  *********************
  81    2015-08-29 07:23    39  ********************
  82    2015-08-29 07:24    39  ********************
  83    2015-08-29 07:25    39  ********************
  84    2015-08-29 07:26    38  *******************
  85    2015-08-29 07:27     ?  -
  86    2015-08-29 07:28    23  ****
  87    2015-08-29 07:29    23  ****
  88    2015-08-29 07:30     ?  -
  89    2015-08-29 07:31    25  ******
  90    2015-08-29 07:32     ?  -
  91    2015-08-29 07:33    26  *******
  92    2015-08-29 07:34    26  *******
  93    2015-08-29 07:35    26  *******
  94    2015-08-29 07:36    27  ********
  95    2015-08-29 07:37    27  ********
  96    2015-08-29 07:38    27  ********
  97    2015-08-29 07:39    28  *********
 ...    ..(  2 skipped).    ..  *********
 100    2015-08-29 07:42    28  *********
 101    2015-08-29 07:43    29  **********
 ...    ..(  6 skipped).    ..  **********
 108    2015-08-29 07:50    29  **********
 109    2015-08-29 07:51    30  ***********
 ...    ..(  5 skipped).    ..  ***********
 115    2015-08-29 07:57    30  ***********
 116    2015-08-29 07:58    31  ************
 117    2015-08-29 07:59    30  ***********
 ...    ..(  5 skipped).    ..  ***********
 123    2015-08-29 08:05    30  ***********
 124    2015-08-29 08:06    41  **********************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

/dev/da4
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da4: Unknown USB bridge [0xcd12:0xef18 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da3: Unknown USB bridge [0x058f:0x6362 (0x129)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da2: Unknown USB bridge [0x058f:0x6362 (0x129)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da1: Unknown USB bridge [0x058f:0x6362 (0x129)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown USB bridge [0x058f:0x6362 (0x129)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/cd1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     PLEXTOR DVDR   PX-880SA
Serial Number:    [No Information Found]
Firmware Version: 1.03
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 1.5 Gb/s
Local Time is:    Sat Aug 29 08:06:51 2015 PDT
SMART support is: Unavailable - Packet Interface Devices [this device: CD/DVD] don't support ATA SMART
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Unavailable
Write cache is:   Unavailable
ATA Security is:  Unavailable
Wt Cache Reorder: Unavailable

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
/dev/cd0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ATAPI   iHAS424   Y
Serial Number:    [No Information Found]
Firmware Version: ZL1V
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 1.5 Gb/s
Local Time is:    Sat Aug 29 08:06:52 2015 PDT
SMART support is: Unavailable - Packet Interface Devices [this device: CD/DVD] don't support ATA SMART
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Unavailable
Write cache is:   Unavailable
ATA Security is:  Unavailable
Wt Cache Reorder: Unavailable

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


