+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint M7E (AF)
Device Model:     SAMSUNG HM321HI
Serial Number:    S24PJDRZ239294
LU WWN Device Id: 5 0024e9 00305e71f
Firmware Version: 2AJ10001
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Aug 15 11:13:07 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  25)	The self-test routine was aborted by
					the host.
Total time to complete Offline 
data collection: 		( 5520) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  92) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    43
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   092   069   025    -    2693
  4 Start_Stop_Count        -O--CK   098   098   000    -    2629
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    8683
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   098   098   000    -    2995
 12 Power_Cycle_Count       -O--CK   098   098   000    -    3014
191 G-Sense_Error_Rate      -O---K   100   100   000    -    2767
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   048   000    -    32 (Min/Max 10/54)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   100   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   100   100   000    -    1
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    2631
223 Load_Retry_Count        -O--CK   098   098   000    -    2995
225 Load_Cycle_Count        -O--CK   080   080   000    -    203099
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x09           SL  R/W      1  Selective self-test log
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               90%      4836         -
# 2  Short offline       Aborted by host               90%      4836         -
# 3  Short offline       Aborted by host               90%      4836         -
# 4  Short offline       Aborted by host               90%      4836         -
# 5  Short offline       Aborted by host               90%      4836         -
# 6  Short offline       Aborted by host               90%      4797         -
# 7  Short offline       Aborted by host               90%      4796         -
# 8  Short offline       Aborted by host               90%      4796         -
# 9  Short offline       Aborted by host               90%      4796         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Aborted_by_host [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    31 Celsius
Power Cycle Min/Max Temperature:     26/31 Celsius
Lifetime    Min/Max Temperature:     14/64 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (5)

Index    Estimated Time   Temperature Celsius
   6    2015-08-15 00:35    34  ***************
   7    2015-08-15 00:40    34  ***************
   8    2015-08-15 00:45    34  ***************
   9    2015-08-15 00:50    32  *************
  10    2015-08-15 00:55    31  ************
 ...    ..(  3 skipped).    ..  ************
  14    2015-08-15 01:15    31  ************
  15    2015-08-15 01:20    32  *************
  16    2015-08-15 01:25    31  ************
  17    2015-08-15 01:30    32  *************
  18    2015-08-15 01:35    31  ************
  19    2015-08-15 01:40    32  *************
  20    2015-08-15 01:45    31  ************
  21    2015-08-15 01:50    34  ***************
  22    2015-08-15 01:55    35  ****************
 ...    ..(  4 skipped).    ..  ****************
  27    2015-08-15 02:20    35  ****************
  28    2015-08-15 02:25    34  ***************
  29    2015-08-15 02:30    32  *************
  30    2015-08-15 02:35    33  **************
  31    2015-08-15 02:40    33  **************
  32    2015-08-15 02:45    32  *************
  33    2015-08-15 02:50    33  **************
  34    2015-08-15 02:55    34  ***************
  35    2015-08-15 03:00    32  *************
  36    2015-08-15 03:05    34  ***************
  37    2015-08-15 03:10    33  **************
  38    2015-08-15 03:15    34  ***************
  39    2015-08-15 03:20    35  ****************
  40    2015-08-15 03:25    35  ****************
  41    2015-08-15 03:30    35  ****************
  42    2015-08-15 03:35    34  ***************
  43    2015-08-15 03:40    35  ****************
 ...    ..(  3 skipped).    ..  ****************
  47    2015-08-15 04:00    35  ****************
  48    2015-08-15 04:05    34  ***************
  49    2015-08-15 04:10    34  ***************
  50    2015-08-15 04:15    34  ***************
  51    2015-08-15 04:20    33  **************
  52    2015-08-15 04:25    33  **************
  53    2015-08-15 04:30    34  ***************
  54    2015-08-15 04:35    32  *************
  55    2015-08-15 04:40    31  ************
  56    2015-08-15 04:45    34  ***************
  57    2015-08-15 04:50    32  *************
  58    2015-08-15 04:55    33  **************
  59    2015-08-15 05:00    34  ***************
  60    2015-08-15 05:05    35  ****************
  61    2015-08-15 05:10    34  ***************
  62    2015-08-15 05:15    33  **************
  63    2015-08-15 05:20    32  *************
  64    2015-08-15 05:25    33  **************
  65    2015-08-15 05:30    34  ***************
  66    2015-08-15 05:35    35  ****************
  67    2015-08-15 05:40    34  ***************
  68    2015-08-15 05:45    34  ***************
  69    2015-08-15 05:50    34  ***************
  70    2015-08-15 05:55    33  **************
  71    2015-08-15 06:00    34  ***************
  72    2015-08-15 06:05    34  ***************
  73    2015-08-15 06:10    34  ***************
  74    2015-08-15 06:15    35  ****************
  75    2015-08-15 06:20    35  ****************
  76    2015-08-15 06:25    34  ***************
  77    2015-08-15 06:30    34  ***************
  78    2015-08-15 06:35    35  ****************
  79    2015-08-15 06:40    35  ****************
  80    2015-08-15 06:45    36  *****************
  81    2015-08-15 06:50    36  *****************
  82    2015-08-15 06:55    34  ***************
  83    2015-08-15 07:00    34  ***************
  84    2015-08-15 07:05    35  ****************
  85    2015-08-15 07:10    35  ****************
  86    2015-08-15 07:15    36  *****************
  87    2015-08-15 07:20    36  *****************
  88    2015-08-15 07:25    36  *****************
  89    2015-08-15 07:30    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  92    2015-08-15 07:45    34  ***************
  93    2015-08-15 07:50    35  ****************
  94    2015-08-15 07:55    35  ****************
  95    2015-08-15 08:00    34  ***************
  96    2015-08-15 08:05    34  ***************
  97    2015-08-15 08:10    35  ****************
  98    2015-08-15 08:15    35  ****************
  99    2015-08-15 08:20    35  ****************
 100    2015-08-15 08:25    36  *****************
 101    2015-08-15 08:30    36  *****************
 102    2015-08-15 08:35    33  **************
 103    2015-08-15 08:40    35  ****************
 104    2015-08-15 08:45    35  ****************
 105    2015-08-15 08:50    35  ****************
 106    2015-08-15 08:55    34  ***************
 107    2015-08-15 09:00    34  ***************
 108    2015-08-15 09:05    35  ****************
 109    2015-08-15 09:10    35  ****************
 110    2015-08-15 09:15    35  ****************
 111    2015-08-15 09:20    34  ***************
 112    2015-08-15 09:25    35  ****************
 ...    ..(  3 skipped).    ..  ****************
 116    2015-08-15 09:45    35  ****************
 117    2015-08-15 09:50    36  *****************
 ...    ..(  2 skipped).    ..  *****************
 120    2015-08-15 10:05    36  *****************
 121    2015-08-15 10:10    33  **************
 122    2015-08-15 10:15    34  ***************
 123    2015-08-15 10:20    33  **************
 124    2015-08-15 10:25    33  **************
 125    2015-08-15 10:30    34  ***************
 126    2015-08-15 10:35    33  **************
 127    2015-08-15 10:40    34  ***************
   0    2015-08-15 10:45    26  *******
   1    2015-08-15 10:50    27  ********
   2    2015-08-15 10:55    28  *********
   3    2015-08-15 11:00    29  **********
   4    2015-08-15 11:05    30  ***********
   5    2015-08-15 11:10    31  ************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

/dev/ada2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2TPJAGCA13421
LU WWN Device Id: 5 0004cf 208c66368
Firmware Version: 2AR10001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Aug 15 11:13:09 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(13140) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 219) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    15318
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   086   086   025    -    4451
  4 Start_Stop_Count        -O--CK   100   100   000    -    925
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    1941
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    43
 12 Power_Cycle_Count       -O--CK   100   100   000    -    945
191 G-Sense_Error_Rate      -O---K   100   100   000    -    17
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   064   049   000    -    35 (Min/Max 14/52)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   100   100   000    -    46
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    1332
223 Load_Retry_Count        -O--CK   100   100   000    -    43
225 Load_Cycle_Count        -O--CK   094   094   000    -    62600
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      2  Comprehensive SMART error log
0x03       GPL     R/O      2  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      2  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xc0-0xdf  GPL,SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 14753 (device log contains only the most recent 8 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 14753 [0] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 70 00 00 74 70 6a 90 40 00  Error: UNC 112 sectors at LBA = 0x74706a90 = 1953524368

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.869  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.867  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.866  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.858  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.856  READ DMA EXT

Error 14752 [7] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 70 00 00 74 70 6a 90 40 00  Error: UNC 112 sectors at LBA = 0x74706a90 = 1953524368

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.867  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.866  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.858  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.856  READ DMA EXT
  61 00 00 01 00 00 00 15 40 73 a8 40 08     00:00:00.856  WRITE FPDMA QUEUED

Error 14751 [6] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 70 00 00 74 70 6a 90 40 00  Error: UNC 112 sectors at LBA = 0x74706a90 = 1953524368

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.866  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.858  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.856  READ DMA EXT
  61 00 00 01 00 00 00 15 40 73 a8 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 00 01 00 00 00 15 40 6e 20 40 08     00:00:00.856  WRITE FPDMA QUEUED

Error 14750 [5] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 70 00 00 74 70 6a 90 40 00  Error: UNC 112 sectors at LBA = 0x74706a90 = 1953524368

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.858  READ DMA EXT
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.856  READ DMA EXT
  61 00 00 01 00 00 00 15 40 73 a8 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 00 01 00 00 00 15 40 6e 20 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 00 01 00 00 00 15 40 6d 20 40 08     00:00:00.856  WRITE FPDMA QUEUED

Error 14749 [4] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 70 00 00 74 70 6a 90 40 00  Error: UNC 112 sectors at LBA = 0x74706a90 = 1953524368

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 01 00 00 00 74 70 6a 00 40 08     00:00:00.856  READ DMA EXT
  61 00 00 01 00 00 00 15 40 73 a8 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 00 01 00 00 00 15 40 6e 20 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 00 01 00 00 00 15 40 6d 20 40 08     00:00:00.856  WRITE FPDMA QUEUED
  61 00 c2 00 90 00 00 15 40 e5 68 40 08     00:00:00.856  WRITE FPDMA QUEUED

Error 14748 [3] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 01 00 00 00 74 70 68 00 40 00  Error: UNC at LBA = 0x74706800 = 1953523712

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 c2 01 00 00 00 74 70 68 00 40 08     00:00:00.795  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.854  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.854  READ LOG EXT
  60 00 c2 01 00 00 00 74 70 68 00 40 08     00:00:00.795  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.852  READ FPDMA QUEUED

Error 14747 [2] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 01 00 00 00 74 70 68 00 40 00  Error: UNC at LBA = 0x74706800 = 1953523712

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 c2 01 00 00 00 74 70 68 00 40 08     00:00:00.795  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.852  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.852  READ LOG EXT
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.795  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.850  READ FPDMA QUEUED

Error 14746 [1] occurred at disk power-on lifetime: 1941 hours (80 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 41 01 00 00 00 74 70 68 00 40 00  Error: UNC at LBA = 0x74706800 = 1953523712

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.795  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.850  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 00 08     00:00:00.850  READ LOG EXT
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.794  READ FPDMA QUEUED
  60 00 00 01 00 00 00 74 70 68 00 40 08     00:00:00.848  READ FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    35 Celsius
Power Cycle Min/Max Temperature:     26/35 Celsius
Lifetime    Min/Max Temperature:     13/51 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (112)

Index    Estimated Time   Temperature Celsius
 113    2015-08-15 00:35    35  ****************
 ...    ..(  2 skipped).    ..  ****************
 116    2015-08-15 00:50    35  ****************
 117    2015-08-15 00:55    34  ***************
 ...    ..(  8 skipped).    ..  ***************
 126    2015-08-15 01:40    34  ***************
 127    2015-08-15 01:45    33  **************
   0    2015-08-15 01:50    33  **************
   1    2015-08-15 01:55    34  ***************
   2    2015-08-15 02:00    34  ***************
   3    2015-08-15 02:05    33  **************
   4    2015-08-15 02:10    33  **************
   5    2015-08-15 02:15    34  ***************
   6    2015-08-15 02:20    34  ***************
   7    2015-08-15 02:25    34  ***************
   8    2015-08-15 02:30    33  **************
   9    2015-08-15 02:35    34  ***************
  10    2015-08-15 02:40    34  ***************
  11    2015-08-15 02:45    33  **************
  12    2015-08-15 02:50    33  **************
  13    2015-08-15 02:55    34  ***************
  14    2015-08-15 03:00    34  ***************
  15    2015-08-15 03:05    34  ***************
  16    2015-08-15 03:10    33  **************
 ...    ..(  2 skipped).    ..  **************
  19    2015-08-15 03:25    33  **************
  20    2015-08-15 03:30    34  ***************
  21    2015-08-15 03:35    33  **************
  22    2015-08-15 03:40    33  **************
  23    2015-08-15 03:45    33  **************
  24    2015-08-15 03:50    34  ***************
  25    2015-08-15 03:55    34  ***************
  26    2015-08-15 04:00    35  ****************
  27    2015-08-15 04:05    36  *****************
  28    2015-08-15 04:10    34  ***************
  29    2015-08-15 04:15    34  ***************
  30    2015-08-15 04:20    35  ****************
  31    2015-08-15 04:25    34  ***************
  32    2015-08-15 04:30    34  ***************
  33    2015-08-15 04:35    35  ****************
  34    2015-08-15 04:40    34  ***************
  35    2015-08-15 04:45    33  **************
  36    2015-08-15 04:50    34  ***************
  37    2015-08-15 04:55    33  **************
  38    2015-08-15 05:00    33  **************
  39    2015-08-15 05:05    33  **************
  40    2015-08-15 05:10    34  ***************
  41    2015-08-15 05:15    34  ***************
  42    2015-08-15 05:20    35  ****************
  43    2015-08-15 05:25    34  ***************
  44    2015-08-15 05:30    33  **************
  45    2015-08-15 05:35    33  **************
  46    2015-08-15 05:40    34  ***************
  47    2015-08-15 05:45    34  ***************
  48    2015-08-15 05:50    33  **************
  49    2015-08-15 05:55    34  ***************
  50    2015-08-15 06:00    33  **************
  51    2015-08-15 06:05    34  ***************
  52    2015-08-15 06:10    33  **************
 ...    ..(  2 skipped).    ..  **************
  55    2015-08-15 06:25    33  **************
  56    2015-08-15 06:30    34  ***************
  57    2015-08-15 06:35    33  **************
 ...    ..(  2 skipped).    ..  **************
  60    2015-08-15 06:50    33  **************
  61    2015-08-15 06:55    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  64    2015-08-15 07:10    34  ***************
  65    2015-08-15 07:15    33  **************
 ...    ..(  2 skipped).    ..  **************
  68    2015-08-15 07:30    33  **************
  69    2015-08-15 07:35    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  72    2015-08-15 07:50    34  ***************
  73    2015-08-15 07:55    33  **************
 ...    ..( 15 skipped).    ..  **************
  89    2015-08-15 09:15    33  **************
  90    2015-08-15 09:20    34  ***************
  91    2015-08-15 09:25    33  **************
 ...    ..(  7 skipped).    ..  **************
  99    2015-08-15 10:05    33  **************
 100    2015-08-15 10:10    34  ***************
 ...    ..(  4 skipped).    ..  ***************
 105    2015-08-15 10:35    34  ***************
 106    2015-08-15 10:40    33  **************
 107    2015-08-15 10:45    29  **********
 108    2015-08-15 10:50    31  ************
 109    2015-08-15 10:55    32  *************
 110    2015-08-15 11:00    34  ***************
 111    2015-08-15 11:05    35  ****************
 112    2015-08-15 11:10    35  ****************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4            9  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4            8  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4         5822  Vendor specific
0x8e07  4        14394  Vendor specific
0x8e08  4          163  Vendor specific
0x8e09  4         2984  Vendor specific
0x8e0a  4        21025  Vendor specific
0x8e0b  4     25812480  Vendor specific
0x8e0c  4        65928  Vendor specific
0x8e0d  4         4554  Vendor specific
0x8e0e  4         6255  Vendor specific
0x8e0f  4      8297472  Vendor specific
0x8e10  4        25020  Vendor specific
0x8e11  4          143  Vendor specific

/dev/ada1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4E7HHC9SU
LU WWN Device Id: 5 0014ee 20b3fb28c
Firmware Version: 82.00A82
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Aug 15 11:13:10 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(52380) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 524) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x703d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   176   171   021    -    8183
  4 Start_Stop_Count        -O--CK   100   100   000    -    247
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    2466
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    105
192 Power-Off_Retract_Count -O--CK   200   200   000    -    59
193 Load_Cycle_Count        -O--CK   200   200   000    -    618
194 Temperature_Celsius     -O---K   119   112   000    -    33
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    33 Celsius
Power Cycle Min/Max Temperature:     27/33 Celsius
Lifetime    Min/Max Temperature:     16/40 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (64)

Index    Estimated Time   Temperature Celsius
  65    2015-08-15 03:16    36  *****************
 ...    ..( 49 skipped).    ..  *****************
 115    2015-08-15 04:06    36  *****************
 116    2015-08-15 04:07    35  ****************
 ...    ..( 14 skipped).    ..  ****************
 131    2015-08-15 04:22    35  ****************
 132    2015-08-15 04:23     ?  -
 133    2015-08-15 04:24    27  ********
 134    2015-08-15 04:25    28  *********
 ...    ..(  2 skipped).    ..  *********
 137    2015-08-15 04:28    28  *********
 138    2015-08-15 04:29    29  **********
 ...    ..(  4 skipped).    ..  **********
 143    2015-08-15 04:34    29  **********
 144    2015-08-15 04:35    30  ***********
 145    2015-08-15 04:36    30  ***********
 146    2015-08-15 04:37    30  ***********
 147    2015-08-15 04:38    31  ************
 ...    ..(  2 skipped).    ..  ************
 150    2015-08-15 04:41    31  ************
 151    2015-08-15 04:42    32  *************
 ...    ..( 11 skipped).    ..  *************
 163    2015-08-15 04:54    32  *************
 164    2015-08-15 04:55    33  **************
 165    2015-08-15 04:56    35  ****************
 ...    ..( 14 skipped).    ..  ****************
 180    2015-08-15 05:11    35  ****************
 181    2015-08-15 05:12    36  *****************
 ...    ..( 31 skipped).    ..  *****************
 213    2015-08-15 05:44    36  *****************
 214    2015-08-15 05:45    35  ****************
 ...    ..(132 skipped).    ..  ****************
 347    2015-08-15 07:58    35  ****************
 348    2015-08-15 07:59    36  *****************
 ...    ..(143 skipped).    ..  *****************
  14    2015-08-15 10:23    36  *****************
  15    2015-08-15 10:24    35  ****************
 ...    ..( 40 skipped).    ..  ****************
  56    2015-08-15 11:05    35  ****************
  57    2015-08-15 11:06    36  *****************
 ...    ..(  6 skipped).    ..  *****************
  64    2015-08-15 11:13    36  *****************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            5  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            5  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         1903  Vendor specific

/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Green
Device Model:     WDC WD10EARX-00N0YB0
Serial Number:    WD-WMC0S0068596
LU WWN Device Id: 5 0014ee 2069025ac
Firmware Version: 51.0AB51
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat Aug 15 11:13:10 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(17280) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 170) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x30b5)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   114   104   021    -    7258
  4 Start_Stop_Count        -O--CK   098   098   000    -    2293
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   085   085   000    -    11250
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   099   099   000    -    1970
192 Power-Off_Retract_Count -O--CK   200   200   000    -    701
193 Load_Cycle_Count        -O--CK   185   185   000    -    45748
194 Temperature_Celsius     -O---K   115   096   000    -    32
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 3
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 [2] occurred at disk power-on lifetime: 5247 hours (218 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 08 00 00 3d 64 99 48 e0 00  Error: UNC 8 sectors at LBA = 0x3d649948 = 1030003016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 3d 64 99 48 e0 00     00:00:32.227  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 48 e0 00     00:00:29.679  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 40 e0 00     00:00:29.679  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 38 e0 00     00:00:29.678  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 30 e0 00     00:00:29.678  READ DMA EXT

Error 2 [1] occurred at disk power-on lifetime: 5247 hours (218 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 08 00 00 3d 64 99 48 e0 00  Error: UNC 8 sectors at LBA = 0x3d649948 = 1030003016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 08 00 00 3d 64 99 48 e0 00     00:00:29.679  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 40 e0 00     00:00:29.679  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 38 e0 00     00:00:29.678  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 30 e0 00     00:00:29.678  READ DMA EXT
  25 00 00 00 08 00 00 3d 64 99 28 e0 00     00:00:29.678  READ DMA EXT

Error 1 [0] occurred at disk power-on lifetime: 5247 hours (218 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 40 00 00 3d 64 99 48 e0 00  Error: UNC 64 sectors at LBA = 0x3d649948 = 1030003016

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 40 00 00 3d 64 99 20 e0 00     00:00:27.086  READ DMA EXT
  35 00 00 00 10 00 00 3d 09 08 00 e0 00     00:00:27.056  WRITE DMA EXT
  25 00 00 01 00 00 00 59 00 bd 80 e0 00     00:00:27.042  READ DMA EXT
  25 00 00 01 00 00 00 59 00 bc 80 e0 00     00:00:27.040  READ DMA EXT
  25 00 00 01 00 00 00 59 00 bb 80 e0 00     00:00:27.039  READ DMA EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10544         -
# 2  Short offline       Aborted by host               90%      7389         -
# 3  Short offline       Aborted by host               90%      7389         -
# 4  Short offline       Aborted by host               90%      7389         -
# 5  Short offline       Aborted by host               90%      7389         -
# 6  Short offline       Aborted by host               90%      7389         -
# 7  Short offline       Aborted by host               90%      7349         -
# 8  Short offline       Aborted by host               90%      7349         -
# 9  Short offline       Aborted by host               90%      7349         -
#10  Short offline       Aborted by host               90%      7349         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    32 Celsius
Power Cycle Min/Max Temperature:     26/32 Celsius
Lifetime    Min/Max Temperature:      0/51 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (302)

Index    Estimated Time   Temperature Celsius
 303    2015-08-15 03:16    29  **********
 304    2015-08-15 03:17    29  **********
 305    2015-08-15 03:18    29  **********
 306    2015-08-15 03:19    30  ***********
 307    2015-08-15 03:20    30  ***********
 308    2015-08-15 03:21    30  ***********
 309    2015-08-15 03:22    31  ************
 ...    ..(  3 skipped).    ..  ************
 313    2015-08-15 03:26    31  ************
 314    2015-08-15 03:27    32  *************
 ...    ..(  9 skipped).    ..  *************
 324    2015-08-15 03:37    32  *************
 325    2015-08-15 03:38    35  ****************
 ...    ..(443 skipped).    ..  ****************
 291    2015-08-15 11:02    35  ****************
 292    2015-08-15 11:03     ?  -
 293    2015-08-15 11:04    26  *******
 ...    ..(  2 skipped).    ..  *******
 296    2015-08-15 11:07    26  *******
 297    2015-08-15 11:08    27  ********
 298    2015-08-15 11:09    27  ********
 299    2015-08-15 11:10    28  *********
 300    2015-08-15 11:11    28  *********
 301    2015-08-15 11:12    29  **********
 302    2015-08-15 11:13    29  **********

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            5  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4         1904  Vendor specific

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown USB bridge [0x058f:0x6387 (0x103)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary



