+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model:     WDC WD40EZRX-00SPEB0
Serial Number:    WD-WCC4E3FE1ZJE
LU WWN Device Id: 5 0014ee 20b337b12
Firmware Version: 80.00A80
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Dec 17 13:53:06 2014 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(52020) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 520) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   253   051    -    0
  3 Spin_Up_Time            POS--K   182   182   021    -    7866
  4 Start_Stop_Count        -O--CK   100   100   000    -    11
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    25
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    11
192 Power-Off_Retract_Count -O--CK   200   200   000    -    9
193 Load_Cycle_Count        -O--CK   200   200   000    -    109
194 Temperature_Celsius     -O---K   124   122   000    -    28
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x09           SL  R/W      1  Selective self-test log
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xa0-0xa7      SL  VS      16  Device vendor specific log
0xa8-0xb6      SL  VS       1  Device vendor specific log
0xb7           SL  VS      39  Device vendor specific log
0xbd           SL  VS       1  Device vendor specific log
0xc0           SL  VS       1  Device vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    28 Celsius
Power Cycle Min/Max Temperature:     21/28 Celsius
Lifetime    Min/Max Temperature:     21/29 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (81)

Index    Estimated Time   Temperature Celsius
  82    2014-12-17 05:56    28  *********
 ...    ..(195 skipped).    ..  *********
 278    2014-12-17 09:12    28  *********
 279    2014-12-17 09:13     ?  -
 280    2014-12-17 09:14    27  ********
 ...    ..(  4 skipped).    ..  ********
 285    2014-12-17 09:19    27  ********
 286    2014-12-17 09:20    28  *********
 ...    ..(  3 skipped).    ..  *********
 290    2014-12-17 09:24    28  *********
 291    2014-12-17 09:25     ?  -
 292    2014-12-17 09:26    20  *
 293    2014-12-17 09:27     ?  -
 294    2014-12-17 09:28    21  **
 ...    ..(  2 skipped).    ..  **
 297    2014-12-17 09:31    21  **
 298    2014-12-17 09:32    22  ***
 ...    ..(  8 skipped).    ..  ***
 307    2014-12-17 09:41    22  ***
 308    2014-12-17 09:42    23  ****
 ...    ..(  2 skipped).    ..  ****
 311    2014-12-17 09:45    23  ****
 312    2014-12-17 09:46    24  *****
 ...    ..(  7 skipped).    ..  *****
 320    2014-12-17 09:54    24  *****
 321    2014-12-17 09:55    25  ******
 322    2014-12-17 09:56     ?  -
 323    2014-12-17 09:57    24  *****
 ...    ..(  3 skipped).    ..  *****
 327    2014-12-17 10:01    24  *****
 328    2014-12-17 10:02    25  ******
 ...    ..(  4 skipped).    ..  ******
 333    2014-12-17 10:07    25  ******
 334    2014-12-17 10:08    26  *******
 335    2014-12-17 10:09     ?  -
 336    2014-12-17 10:10    26  *******
 ...    ..(  8 skipped).    ..  *******
 345    2014-12-17 10:19    26  *******
 346    2014-12-17 10:20    27  ********
 ...    ..( 19 skipped).    ..  ********
 366    2014-12-17 10:40    27  ********
 367    2014-12-17 10:41     ?  -
 368    2014-12-17 10:42    21  **
 369    2014-12-17 10:43    22  ***
 370    2014-12-17 10:44    22  ***
 371    2014-12-17 10:45    23  ****
 372    2014-12-17 10:46    23  ****
 373    2014-12-17 10:47    24  *****
 374    2014-12-17 10:48    24  *****
 375    2014-12-17 10:49    24  *****
 376    2014-12-17 10:50    25  ******
 ...    ..(  5 skipped).    ..  ******
 382    2014-12-17 10:56    25  ******
 383    2014-12-17 10:57    26  *******
 ...    ..(  4 skipped).    ..  *******
 388    2014-12-17 11:02    26  *******
 389    2014-12-17 11:03    27  ********
 ...    ..( 39 skipped).    ..  ********
 429    2014-12-17 11:43    27  ********
 430    2014-12-17 11:44    28  *********
 ...    ..( 82 skipped).    ..  *********
  35    2014-12-17 13:07    28  *********
  36    2014-12-17 13:08    27  ********
 ...    ..(  2 skipped).    ..  ********
  39    2014-12-17 13:11    27  ********
  40    2014-12-17 13:12    28  *********
 ...    ..( 40 skipped).    ..  *********
  81    2014-12-17 13:53    28  *********

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

/dev/da3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da3: Unknown USB bridge [0x0781:0x5571 (0x126)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da2: Unknown USB bridge [0x0781:0x5571 (0x126)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

/dev/da1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model:     WDC WD40EZRX-00SPEB0
Serial Number:    WD-WCC4E2PTVTP9
LU WWN Device Id: 5 0014ee 2b5de9840
Firmware Version: 80.00A80
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Dec 17 13:53:06 2014 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(54300) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 543) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   253   051    -    0
  3 Spin_Up_Time            POS--K   180   180   021    -    8000
  4 Start_Stop_Count        -O--CK   100   100   000    -    11
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    25
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    11
192 Power-Off_Retract_Count -O--CK   200   200   000    -    9
193 Load_Cycle_Count        -O--CK   200   200   000    -    97
194 Temperature_Celsius     -O---K   124   122   000    -    28
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      39  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    28 Celsius
Power Cycle Min/Max Temperature:     20/28 Celsius
Lifetime    Min/Max Temperature:     20/29 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (38)

Index    Estimated Time   Temperature Celsius
  39    2014-12-17 05:56    28  *********
 ...    ..(195 skipped).    ..  *********
 235    2014-12-17 09:12    28  *********
 236    2014-12-17 09:13     ?  -
 237    2014-12-17 09:14    27  ********
 238    2014-12-17 09:15    27  ********
 239    2014-12-17 09:16    27  ********
 240    2014-12-17 09:17    28  *********
 ...    ..(  4 skipped).    ..  *********
 245    2014-12-17 09:22    28  *********
 246    2014-12-17 09:23     ?  -
 247    2014-12-17 09:24    20  *
 248    2014-12-17 09:25     ?  -
 249    2014-12-17 09:26    22  ***
 250    2014-12-17 09:27    21  **
 251    2014-12-17 09:28    22  ***
 ...    ..(  8 skipped).    ..  ***
 260    2014-12-17 09:37    22  ***
 261    2014-12-17 09:38    23  ****
 ...    ..(  4 skipped).    ..  ****
 266    2014-12-17 09:43    23  ****
 267    2014-12-17 09:44    24  *****
 ...    ..(  6 skipped).    ..  *****
 274    2014-12-17 09:51    24  *****
 275    2014-12-17 09:52    25  ******
 276    2014-12-17 09:53    25  ******
 277    2014-12-17 09:54     ?  -
 278    2014-12-17 09:55    25  ******
 279    2014-12-17 09:56    24  *****
 ...    ..(  2 skipped).    ..  *****
 282    2014-12-17 09:59    24  *****
 283    2014-12-17 10:00    25  ******
 ...    ..(  4 skipped).    ..  ******
 288    2014-12-17 10:05    25  ******
 289    2014-12-17 10:06    26  *******
 290    2014-12-17 10:07     ?  -
 291    2014-12-17 10:08    26  *******
 ...    ..( 32 skipped).    ..  *******
 324    2014-12-17 10:41    26  *******
 325    2014-12-17 10:42     ?  -
 326    2014-12-17 10:43    20  *
 327    2014-12-17 10:44    21  **
 328    2014-12-17 10:45    22  ***
 329    2014-12-17 10:46    22  ***
 330    2014-12-17 10:47    23  ****
 331    2014-12-17 10:48    23  ****
 332    2014-12-17 10:49    24  *****
 ...    ..(  3 skipped).    ..  *****
 336    2014-12-17 10:53    24  *****
 337    2014-12-17 10:54    25  ******
 ...    ..(  2 skipped).    ..  ******
 340    2014-12-17 10:57    25  ******
 341    2014-12-17 10:58    26  *******
 ...    ..(  6 skipped).    ..  *******
 348    2014-12-17 11:05    26  *******
 349    2014-12-17 11:06    27  ********
 ...    ..( 44 skipped).    ..  ********
 394    2014-12-17 11:51    27  ********
 395    2014-12-17 11:52    28  *********
 396    2014-12-17 11:53    28  *********
 397    2014-12-17 11:54    27  ********
 ...    ..( 28 skipped).    ..  ********
 426    2014-12-17 12:23    27  ********
 427    2014-12-17 12:24    28  *********
 ...    ..( 11 skipped).    ..  *********
 439    2014-12-17 12:36    28  *********
 440    2014-12-17 12:37    27  ********
 ...    ..( 37 skipped).    ..  ********
   0    2014-12-17 13:15    27  ********
   1    2014-12-17 13:16    28  *********
 ...    ..( 28 skipped).    ..  *********
  30    2014-12-17 13:45    28  *********
  31    2014-12-17 13:46    27  ********
 ...    ..(  3 skipped).    ..  ********
  35    2014-12-17 13:50    27  ********
  36    2014-12-17 13:51    28  *********
  37    2014-12-17 13:52    28  *********
  38    2014-12-17 13:53    28  *********

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           10  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           11  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4        11756  Vendor specific

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model:     WDC WD40EZRX-00SPEB0
Serial Number:    WD-WCC4E4CL824N
LU WWN Device Id: 5 0014ee 20b33c353
Firmware Version: 80.00A80
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Dec 17 13:53:06 2014 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(51540) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 515) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   253   051    -    0
  3 Spin_Up_Time            POS--K   182   182   021    -    7866
  4 Start_Stop_Count        -O--CK   100   100   000    -    10
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    24
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    10
192 Power-Off_Retract_Count -O--CK   200   200   000    -    8
193 Load_Cycle_Count        -O--CK   200   200   000    -    103
194 Temperature_Celsius     -O---K   124   123   000    -    28
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb6  GPL,SL  VS       1  Device vendor specific log
0xb7       GPL,SL  VS      39  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    28 Celsius
Power Cycle Min/Max Temperature:     21/28 Celsius
Lifetime    Min/Max Temperature:     21/29 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (3)

Index    Estimated Time   Temperature Celsius
   4    2014-12-17 05:56    29  **********
 ...    ..(230 skipped).    ..  **********
 235    2014-12-17 09:47    29  **********
 236    2014-12-17 09:48     ?  -
 237    2014-12-17 09:49    28  *********
 238    2014-12-17 09:50    27  ********
 239    2014-12-17 09:51    27  ********
 240    2014-12-17 09:52    28  *********
 ...    ..(  4 skipped).    ..  *********
 245    2014-12-17 09:57    28  *********
 246    2014-12-17 09:58     ?  -
 247    2014-12-17 09:59    20  *
 248    2014-12-17 10:00     ?  -
 249    2014-12-17 10:01    22  ***
 ...    ..(  7 skipped).    ..  ***
 257    2014-12-17 10:09    22  ***
 258    2014-12-17 10:10    23  ****
 ...    ..(  3 skipped).    ..  ****
 262    2014-12-17 10:14    23  ****
 263    2014-12-17 10:15    24  *****
 ...    ..(  3 skipped).    ..  *****
 267    2014-12-17 10:19    24  *****
 268    2014-12-17 10:20    25  ******
 ...    ..(  6 skipped).    ..  ******
 275    2014-12-17 10:27    25  ******
 276    2014-12-17 10:28    26  *******
 277    2014-12-17 10:29     ?  -
 278    2014-12-17 10:30    25  ******
 ...    ..(  3 skipped).    ..  ******
 282    2014-12-17 10:34    25  ******
 283    2014-12-17 10:35    26  *******
 ...    ..(  5 skipped).    ..  *******
 289    2014-12-17 10:41    26  *******
 290    2014-12-17 10:42     ?  -
 291    2014-12-17 10:43    21  **
 292    2014-12-17 10:44    22  ***
 293    2014-12-17 10:45    22  ***
 294    2014-12-17 10:46    23  ****
 295    2014-12-17 10:47    24  *****
 296    2014-12-17 10:48    24  *****
 297    2014-12-17 10:49    25  ******
 ...    ..(  7 skipped).    ..  ******
 305    2014-12-17 10:57    25  ******
 306    2014-12-17 10:58    26  *******
 ...    ..(  2 skipped).    ..  *******
 309    2014-12-17 11:01    26  *******
 310    2014-12-17 11:02    27  ********
 ...    ..(  3 skipped).    ..  ********
 314    2014-12-17 11:06    27  ********
 315    2014-12-17 11:07    28  *********
 ...    ..(165 skipped).    ..  *********
   3    2014-12-17 13:53    28  *********

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           21  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           22  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4        11756  Vendor specific



