+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1645040575                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1645040575                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 2741.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1645040575                        +
+--------------------------------------------------------------------------------+
                 id = 2
     smarttest_type = S
     smarttest_desc = 
     smarttest_hour = 0
 smarttest_daymonth = *
    smarttest_month = *
  smarttest_dayweek = sun
smarttest_all_disks = 1
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1645040575                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                          smartctl output @1645040575                           +
+--------------------------------------------------------------------------------+
/dev/da22 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGY1XXZ
LU WWN Device Id: 5 000cca 2a2cd3604
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1170) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       442 (Average 441)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       80
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       7860
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       75
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   096   096   000    Old_age   Always       -       5953
193 Load_Cycle_Count        0x0012   096   096   000    Old_age   Always       -       5953
194 Temperature_Celsius     0x0002   180   180   000    Old_age   Always       -       36 (Min/Max 19/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      7823         -
# 2  Short offline       Completed without error       00%      7655         -
# 3  Short offline       Completed without error       00%      7487         -
# 4  Short offline       Completed without error       00%      7319         -
# 5  Short offline       Completed without error       00%      7151         -
# 6  Short offline       Completed without error       00%      6983         -
# 7  Short offline       Completed without error       00%      6815         -
# 8  Short offline       Completed without error       00%      6623         -
# 9  Short offline       Completed without error       00%      6455         -
#10  Short offline       Completed without error       00%      6287         -
#11  Short offline       Completed without error       00%      5976         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da21 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGYK0GZ
LU WWN Device Id: 5 000cca 2a2cd6ea2
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1084) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   158   158   024    Pre-fail  Always       -       434 (Average 400)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       82
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       7879
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       77
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   096   096   000    Old_age   Always       -       5652
193 Load_Cycle_Count        0x0012   096   096   000    Old_age   Always       -       5652
194 Temperature_Celsius     0x0002   216   216   000    Old_age   Always       -       30 (Min/Max 18/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      7841         -
# 2  Short offline       Completed without error       00%      7673         -
# 3  Short offline       Completed without error       00%      7505         -
# 4  Short offline       Completed without error       00%      7337         -
# 5  Short offline       Completed without error       00%      7169         -
# 6  Short offline       Completed without error       00%      7001         -
# 7  Short offline       Completed without error       00%      6833         -
# 8  Short offline       Completed without error       00%      6642         -
# 9  Short offline       Completed without error       00%      6474         -
#10  Short offline       Completed without error       00%      6306         -
#11  Short offline       Completed without error       00%      5995         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da20 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGT3HYZ
LU WWN Device Id: 5 000cca 2a2caf619
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1117) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   153   153   024    Pre-fail  Always       -       435 (Average 426)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       24
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2327
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       24
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       123
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       123
194 Temperature_Celsius     0x0002   203   203   000    Old_age   Always       -       32 (Min/Max 19/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       2

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 e0 18 20 f6 3e 40 00      00:03:26.062  READ FPDMA QUEUED
  60 e0 10 20 f4 3e 40 00      00:03:26.061  READ FPDMA QUEUED
  60 e0 08 20 0a 00 40 00      00:03:26.061  READ FPDMA QUEUED
  60 e0 00 20 08 00 40 00      00:03:26.061  READ FPDMA QUEUED
  ec 00 00 00 00 00 00 00      00:03:26.061  IDENTIFY DEVICE

Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 e0 08 20 0a 00 40 00      00:03:25.831  READ FPDMA QUEUED
  60 e0 18 20 f6 3e 40 00      00:03:25.820  READ FPDMA QUEUED
  60 e0 10 20 f4 3e 40 00      00:03:25.820  READ FPDMA QUEUED
  60 e0 00 20 08 00 40 00      00:03:25.820  READ FPDMA QUEUED
  ec 00 00 00 00 00 00 00      00:03:25.820  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2289         -
# 2  Short offline       Completed without error       00%      2121         -
# 3  Short offline       Completed without error       00%      1953         -
# 4  Short offline       Completed without error       00%      1785         -
# 5  Short offline       Completed without error       00%      1617         -
# 6  Short offline       Completed without error       00%      1449         -
# 7  Short offline       Completed without error       00%      1281         -
# 8  Short offline       Completed without error       00%      1090         -
# 9  Short offline       Completed without error       00%       922         -
#10  Short offline       Completed without error       00%       754         -
#11  Short offline       Completed without error       00%       443         -
#12  Short offline       Completed without error       00%       136         -
#13  Short offline       Completed without error       00%        25         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da19 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGVPSHZ
LU WWN Device Id: 5 000cca 2a2cc2353
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1112) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       438 (Average 438)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       23
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2327
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       23
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       124
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       124
194 Temperature_Celsius     0x0002   180   180   000    Old_age   Always       -       36 (Min/Max 20/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       2

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 00 28 f7 49 40 00      00:45:33.798  WRITE FPDMA QUEUED
  61 00 00 28 f6 49 40 00      00:45:33.794  WRITE FPDMA QUEUED
  61 00 00 28 f5 49 40 00      00:45:33.793  WRITE FPDMA QUEUED
  61 00 00 28 f4 49 40 00      00:45:33.792  WRITE FPDMA QUEUED
  61 00 00 28 f3 49 40 00      00:45:33.791  WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 e0 00 20 08 00 40 00      00:03:26.108  READ FPDMA QUEUED
  60 e0 18 20 f6 3e 40 00      00:03:26.107  READ FPDMA QUEUED
  60 e0 10 20 f4 3e 40 00      00:03:26.107  READ FPDMA QUEUED
  60 e0 08 20 0a 00 40 00      00:03:26.107  READ FPDMA QUEUED
  ec 00 00 00 00 00 00 00      00:03:26.107  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2289         -
# 2  Short offline       Completed without error       00%      2121         -
# 3  Short offline       Completed without error       00%      1953         -
# 4  Short offline       Completed without error       00%      1792         -
# 5  Short offline       Completed without error       00%      1617         -
# 6  Short offline       Completed without error       00%      1449         -
# 7  Short offline       Completed without error       00%      1281         -
# 8  Short offline       Completed without error       00%      1095         -
# 9  Short offline       Completed without error       00%       922         -
#10  Short offline       Completed without error       00%       754         -
#11  Short offline       Completed without error       00%       447         -
#12  Short offline       Completed without error       00%       136         -
#13  Short offline       Completed without error       00%        25         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da18 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD101EDAZ-11Y7KA0
Serial Number:    VCG45BEN
LU WWN Device Id: 5 000cca 0b0c1e5a3
Firmware Version: 81.00A81
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   87) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1054) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   128   128   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   134   134   024    Pre-fail  Always       -       604 (Average 603)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       26
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2328
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       26
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       127
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       127
194 Temperature_Celsius     0x0002   166   166   000    Old_age   Always       -       39 (Min/Max 19/57)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       1

SMART Error Log Version: 1
ATA Error Count: 1
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 e0 18 20 f6 3e 40 00      00:03:26.240  READ FPDMA QUEUED
  60 e0 10 20 f4 3e 40 00      00:03:26.239  READ FPDMA QUEUED
  60 e0 08 20 0a 00 40 00      00:03:26.239  READ FPDMA QUEUED
  60 e0 00 20 08 00 40 00      00:03:26.239  READ FPDMA QUEUED
  ec 00 00 00 00 00 00 00      00:03:26.239  IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2290         -
# 2  Short offline       Completed without error       00%      2122         -
# 3  Short offline       Completed without error       00%      1955         -
# 4  Short offline       Completed without error       00%      1793         -
# 5  Short offline       Completed without error       00%      1619         -
# 6  Short offline       Completed without error       00%      1451         -
# 7  Short offline       Completed without error       00%      1282         -
# 8  Short offline       Completed without error       00%      1096         -
# 9  Short offline       Completed without error       00%       923         -
#10  Short offline       Completed without error       00%       755         -
#11  Short offline       Completed without error       00%       448         -
#12  Short offline       Completed without error       00%       137         -
#13  Short offline       Completed without error       00%        27         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da17 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGTJ1MZ
LU WWN Device Id: 5 000cca 2a2cb252a
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1270) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   128   128   054    Old_age   Offline      -       116
  3 Spin_Up_Time            0x0007   146   146   024    Pre-fail  Always       -       452 (Average 450)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       23
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2327
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       23
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       124
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       124
194 Temperature_Celsius     0x0002   196   196   000    Old_age   Always       -       33 (Min/Max 20/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2289         -
# 2  Short offline       Completed without error       00%      2121         -
# 3  Short offline       Completed without error       00%      1953         -
# 4  Short offline       Completed without error       00%      1792         -
# 5  Short offline       Completed without error       00%      1617         -
# 6  Short offline       Completed without error       00%      1449         -
# 7  Short offline       Completed without error       00%      1281         -
# 8  Short offline       Completed without error       00%      1095         -
# 9  Short offline       Completed without error       00%       922         -
#10  Short offline       Completed without error       00%       754         -
#11  Short offline       Completed without error       00%       447         -
#12  Short offline       Completed without error       00%       136         -
#13  Short offline       Completed without error       00%        25         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da16 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EZAZ-11TDBA0
Serial Number:    4DGTVKNZ
LU WWN Device Id: 5 000cca 2a2cb4ca5
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1093) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       442 (Average 442)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       23
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2327
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       23
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       124
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       124
194 Temperature_Celsius     0x0002   203   203   000    Old_age   Always       -       32 (Min/Max 19/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      2289         -
# 2  Short offline       Completed without error       00%      2121         -
# 3  Short offline       Completed without error       00%      1953         -
# 4  Short offline       Completed without error       00%      1792         -
# 5  Short offline       Completed without error       00%      1617         -
# 6  Short offline       Completed without error       00%      1449         -
# 7  Short offline       Completed without error       00%      1281         -
# 8  Short offline       Completed without error       00%      1095         -
# 9  Short offline       Completed without error       00%       922         -
#10  Short offline       Completed without error       00%       754         -
#11  Short offline       Completed without error       00%       447         -
#12  Short offline       Completed without error       00%       136         -
#13  Short offline       Completed without error       00%        25         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da15 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OWC Mercury Electra 3G SSD
Serial Number:    EX6G24012E52S5116
LU WWN Device Id: 0 000000 000000000
Firmware Version: 504ABBF0
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
TRIM Command:     Available, deterministic
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0021)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   120   050    Pre-fail  Always       -       0/0
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       126
  9 Power_On_Hours_and_Msec 0x0032   064   064   000    Old_age   Always       -       31642h+25m+10.220s
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2376
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       63
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       723
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       1
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       63
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   032   050   000    Old_age   Always       -       32 (Min/Max 12/50)
195 ECC_Uncorr_Error_Count  0x001c   100   100   000    Old_age   Offline      -       0/0
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       126
201 Unc_Soft_Read_Err_Rate  0x001c   100   100   000    Old_age   Offline      -       0/0
204 Soft_ECC_Correct_Rate   0x001c   100   100   000    Old_age   Offline      -       0/0
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       1386
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       1277
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       1277
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       6135

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da14 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OWC Mercury EXTREME Pro SSD
Serial Number:    MXE24011E23D9689
LU WWN Device Id: 5 000000 000009689
Firmware Version: 361A13F0
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
TRIM Command:     Available, deterministic
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   5) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   099   050    Pre-fail  Always       -       0/4488127
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       43859h+14m+14.350s
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2971
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       282
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       1
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   030   030   000    Old_age   Always       -       30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count  0x001c   100   099   000    Old_age   Offline      -       0/4488127
196 Reallocated_Event_Count 0x0033   100   100   000    Pre-fail  Always       -       0
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       6976
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       7360
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       7360
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       14080

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da13 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    2TJ1RM7D
LU WWN Device Id: 5 000cca 26adcf84b
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1135) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   146   146   024    Pre-fail  Always       -       450 (Average 448)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       455
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16552
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       190
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4634
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4634
194 Temperature_Celsius     0x0002   203   203   000    Old_age   Always       -       32 (Min/Max 19/54)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       17

SMART Error Log Version: 1
ATA Error Count: 17 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 17 occurred at disk power-on lifetime: 6737 hours (280 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fa 1b 40 00      00:10:39.550  READ FPDMA QUEUED
  60 00 00 00 f8 1b 40 00      00:10:38.463  READ FPDMA QUEUED
  60 00 00 00 f6 1b 40 00      00:10:38.417  READ FPDMA QUEUED
  60 00 00 00 f4 1b 40 00      00:10:38.404  READ FPDMA QUEUED
  60 00 00 00 f2 1b 40 00      00:10:38.361  READ FPDMA QUEUED

Error 16 occurred at disk power-on lifetime: 6737 hours (280 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 54 1b 40 00      00:09:47.892  READ FPDMA QUEUED
  60 00 00 00 52 1b 40 00      00:09:44.810  READ FPDMA QUEUED
  60 00 00 00 50 1b 40 00      00:09:35.635  READ FPDMA QUEUED
  60 00 00 00 4e 1b 40 00      00:09:34.574  READ FPDMA QUEUED
  60 00 00 00 4c 1b 40 00      00:09:34.560  READ FPDMA QUEUED

Error 15 occurred at disk power-on lifetime: 6737 hours (280 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 a2 1a 40 00      00:09:06.513  READ FPDMA QUEUED
  60 00 00 00 a0 1a 40 00      00:09:06.499  READ FPDMA QUEUED
  60 00 00 00 9e 1a 40 00      00:09:06.487  READ FPDMA QUEUED
  60 00 00 00 9c 1a 40 00      00:09:06.449  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:09:04.590  FLUSH CACHE EXT

Error 14 occurred at disk power-on lifetime: 6737 hours (280 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 f0 00 10 9c b8 40 00      00:08:59.346  READ FPDMA QUEUED
  60 00 00 00 72 1a 40 00      00:08:58.685  READ FPDMA QUEUED
  60 00 00 00 70 1a 40 00      00:08:58.663  READ FPDMA QUEUED
  60 00 00 00 6e 1a 40 00      00:08:58.652  READ FPDMA QUEUED
  60 00 00 00 6c 1a 40 00      00:08:58.609  READ FPDMA QUEUED

Error 13 occurred at disk power-on lifetime: 6737 hours (280 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fe 19 40 00      00:08:40.763  READ FPDMA QUEUED
  60 00 00 00 fc 19 40 00      00:08:39.631  READ FPDMA QUEUED
  60 00 00 00 fa 19 40 00      00:08:39.620  READ FPDMA QUEUED
  60 00 00 00 f8 19 40 00      00:08:39.602  READ FPDMA QUEUED
  60 00 00 00 f6 19 40 00      00:08:39.562  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16514         -
# 2  Short offline       Completed without error       00%     16346         -
# 3  Short offline       Completed without error       00%     16179         -
# 4  Short offline       Completed without error       00%     16017         -
# 5  Short offline       Completed without error       00%     15843         -
# 6  Short offline       Completed without error       00%     15675         -
# 7  Short offline       Completed without error       00%     15506         -
# 8  Short offline       Completed without error       00%     15322         -
# 9  Short offline       Completed without error       00%     15147         -
#10  Short offline       Completed without error       00%     14979         -
#11  Short offline       Completed without error       00%     14673         -
#12  Short offline       Completed without error       00%     14361         -
#13  Short offline       Completed without error       00%     14251         -
#14  Short offline       Completed without error       00%     14083         -
#15  Short offline       Completed without error       00%     13922         -
#16  Short offline       Completed without error       00%     13645         -
#17  Short offline       Completed without error       00%     13477         -
#18  Short offline       Completed without error       00%     13309         -
#19  Short offline       Completed without error       00%     13147         -
#20  Short offline       Completed without error       00%     12941         -
#21  Short offline       Completed without error       00%     12779         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da12 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEG8WVKN
LU WWN Device Id: 5 000cca 267c40b8a
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1222) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       440 (Average 440)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       456
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16588
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       185
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4587
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4587
194 Temperature_Celsius     0x0002   185   185   000    Old_age   Always       -       35 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       212

SMART Error Log Version: 1
ATA Error Count: 212 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 212 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 da 1d 40 00      00:11:39.802  READ FPDMA QUEUED
  61 00 00 00 d8 1d 40 00      00:11:35.659  WRITE FPDMA QUEUED
  60 00 00 00 d8 1d 40 00      00:11:35.618  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:34.615  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:34.615  READ LOG EXT

Error 211 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 d8 1d 40 00      00:11:34.615  READ FPDMA QUEUED
  61 00 00 00 d6 1d 40 00      00:11:33.548  WRITE FPDMA QUEUED
  60 00 00 00 d6 1d 40 00      00:11:33.547  READ FPDMA QUEUED
  61 00 00 00 d4 1d 40 00      00:11:32.491  WRITE FPDMA QUEUED
  60 00 00 00 d4 1d 40 00      00:11:32.490  READ FPDMA QUEUED

Error 210 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 c0 1c 40 00      00:11:18.681  READ FPDMA QUEUED
  61 00 00 00 be 1c 40 00      00:11:18.669  WRITE FPDMA QUEUED
  60 00 00 00 be 1c 40 00      00:11:18.668  READ FPDMA QUEUED
  61 00 00 00 bc 1c 40 00      00:11:18.657  WRITE FPDMA QUEUED
  60 00 00 00 bc 1c 40 00      00:11:18.656  READ FPDMA QUEUED

Error 209 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 ac 1c 40 00      00:11:15.263  READ FPDMA QUEUED
  61 00 00 00 aa 1c 40 00      00:11:15.247  WRITE FPDMA QUEUED
  60 00 00 00 aa 1c 40 00      00:11:15.246  READ FPDMA QUEUED
  61 00 00 00 a8 1c 40 00      00:11:14.160  WRITE FPDMA QUEUED
  60 00 00 00 a8 1c 40 00      00:11:14.159  READ FPDMA QUEUED

Error 208 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 92 1c 40 00      00:11:03.545  READ FPDMA QUEUED
  61 00 00 00 90 1c 40 00      00:11:02.438  WRITE FPDMA QUEUED
  60 00 00 00 90 1c 40 00      00:11:02.438  READ FPDMA QUEUED
  61 00 00 00 8e 1c 40 00      00:11:02.396  WRITE FPDMA QUEUED
  60 00 00 00 8e 1c 40 00      00:11:02.395  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16551         -
# 2  Short offline       Completed without error       00%     16383         -
# 3  Short offline       Completed without error       00%     16215         -
# 4  Short offline       Completed without error       00%     16057         -
# 5  Short offline       Completed without error       00%     15879         -
# 6  Short offline       Completed without error       00%     15711         -
# 7  Short offline       Completed without error       00%     15543         -
# 8  Short offline       Completed without error       00%     15361         -
# 9  Short offline       Completed without error       00%     15183         -
#10  Short offline       Completed without error       00%     15015         -
#11  Short offline       Completed without error       00%     14711         -
#12  Short offline       Completed without error       00%     14397         -
#13  Short offline       Completed without error       00%     14287         -
#14  Short offline       Completed without error       00%     14119         -
#15  Short offline       Completed without error       00%     13958         -
#16  Short offline       Completed without error       00%     13682         -
#17  Short offline       Completed without error       00%     13514         -
#18  Short offline       Completed without error       00%     13346         -
#19  Short offline       Completed without error       00%     13186         -
#20  Short offline       Completed without error       00%     12977         -
#21  Short offline       Completed without error       00%     12817         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da11 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEGMRRKN
LU WWN Device Id: 5 000cca 267c8f85e
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1099) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   148   148   024    Pre-fail  Always       -       443 (Average 444)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       439
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16523
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       166
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4580
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4580
194 Temperature_Celsius     0x0002   180   180   000    Old_age   Always       -       36 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       9

SMART Error Log Version: 1
ATA Error Count: 9 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 9 occurred at disk power-on lifetime: 6707 hours (279 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 c0 1d 40 00      00:11:26.764  READ FPDMA QUEUED
  61 00 00 00 be 1d 40 00      00:11:25.691  WRITE FPDMA QUEUED
  60 00 00 00 be 1d 40 00      00:11:25.690  READ FPDMA QUEUED
  61 00 00 00 bc 1d 40 00      00:11:25.679  WRITE FPDMA QUEUED
  60 00 00 00 bc 1d 40 00      00:11:25.678  READ FPDMA QUEUED

Error 8 occurred at disk power-on lifetime: 6707 hours (279 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 e0 1b 40 00      00:10:33.063  READ FPDMA QUEUED
  61 00 00 00 de 1b 40 00      00:10:33.051  WRITE FPDMA QUEUED
  60 00 00 00 de 1b 40 00      00:10:33.051  READ FPDMA QUEUED
  61 00 00 00 dc 1b 40 00      00:10:33.031  WRITE FPDMA QUEUED
  60 00 00 00 dc 1b 40 00      00:10:33.030  READ FPDMA QUEUED

Error 7 occurred at disk power-on lifetime: 6707 hours (279 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 52 1b 40 00      00:09:44.846  READ FPDMA QUEUED
  61 00 00 00 50 1b 40 00      00:09:41.716  WRITE FPDMA QUEUED
  60 00 00 00 50 1b 40 00      00:09:40.680  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:09:39.680  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:09:39.680  READ LOG EXT

Error 6 occurred at disk power-on lifetime: 6707 hours (279 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 50 1b 40 00      00:09:39.680  READ FPDMA QUEUED
  61 00 00 00 4e 1b 40 00      00:09:34.586  WRITE FPDMA QUEUED
  60 00 00 00 4e 1b 40 00      00:09:34.585  READ FPDMA QUEUED
  61 00 00 00 4c 1b 40 00      00:09:34.572  WRITE FPDMA QUEUED
  60 00 00 00 4c 1b 40 00      00:09:34.572  READ FPDMA QUEUED

Error 5 occurred at disk power-on lifetime: 6707 hours (279 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 3e 19 40 00      00:08:12.537  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:08:11.504  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:08:11.504  READ LOG EXT
  60 00 00 00 3e 19 40 00      00:08:11.503  READ FPDMA QUEUED
  61 00 00 00 3c 19 40 00      00:08:10.455  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16485         -
# 2  Short offline       Completed without error       00%     16317         -
# 3  Short offline       Completed without error       00%     16149         -
# 4  Short offline       Completed without error       00%     15992         -
# 5  Short offline       Completed without error       00%     15813         -
# 6  Short offline       Completed without error       00%     15645         -
# 7  Short offline       Completed without error       00%     15477         -
# 8  Short offline       Completed without error       00%     15295         -
# 9  Short offline       Completed without error       00%     15118         -
#10  Short offline       Completed without error       00%     14950         -
#11  Short offline       Completed without error       00%     14646         -
#12  Short offline       Completed without error       00%     14332         -
#13  Short offline       Completed without error       00%     14221         -
#14  Short offline       Completed without error       00%     14054         -
#15  Short offline       Completed without error       00%     13892         -
#16  Short offline       Completed without error       00%     13616         -
#17  Short offline       Completed without error       00%     13448         -
#18  Short offline       Completed without error       00%     13280         -
#19  Short offline       Completed without error       00%     13120         -
#20  Short offline       Completed without error       00%     12912         -
#21  Short offline       Completed without error       00%     12752         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da10 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate IronWolf
Device Model:     ST10000VN0004-1ZD101
Serial Number:    ZA2CALDZ
LU WWN Device Id: 5 000c50 0c414e8e0
Firmware Version: SC61
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:55 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  567) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 920) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x50bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   084   064   044    Pre-fail  Always       -       224969816
  3 Spin_Up_Time            0x0003   089   089   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       316
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   045    Pre-fail  Always       -       290524822
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12657
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       143
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1
189 High_Fly_Writes         0x003a   078   078   000    Old_age   Always       -       22
190 Airflow_Temperature_Cel 0x0022   064   041   040    Old_age   Always       -       36 (Min/Max 19/36)
191 G-Sense_Error_Rate      0x0032   099   099   000    Old_age   Always       -       2704
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       526
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       759
194 Temperature_Celsius     0x0022   036   059   000    Old_age   Always       -       36 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   009   003   000    Old_age   Always       -       224969816
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Pressure_Limit          0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12212 (49 68 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       40253307888
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       217735914923

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12619         -
# 2  Short offline       Completed without error       00%     12451         -
# 3  Short offline       Completed without error       00%     12284         -
# 4  Short offline       Completed without error       00%     12116         -
# 5  Short offline       Completed without error       00%     11948         -
# 6  Short offline       Completed without error       00%     11780         -
# 7  Short offline       Completed without error       00%     11611         -
# 8  Short offline       Completed without error       00%     11420         -
# 9  Short offline       Completed without error       00%     11252         -
#10  Short offline       Completed without error       00%     11084         -
#11  Short offline       Completed without error       00%     10773         -
#12  Short offline       Completed without error       00%     10466         -
#13  Short offline       Completed without error       00%     10356         -
#14  Short offline       Completed without error       00%     10188         -
#15  Short offline       Completed without error       00%     10020         -
#16  Short offline       Completed without error       00%      9750         -
#17  Short offline       Completed without error       00%      9582         -
#18  Short offline       Completed without error       00%      9414         -
#19  Short offline       Completed without error       00%      9246         -
#20  Short offline       Completed without error       00%      9046         -
#21  Short offline       Completed without error       00%      8878         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da9 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EG484AZ
LU WWN Device Id: 5 000cca 27ec1f00a
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1101) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   151   151   024    Pre-fail  Always       -       435 (Average 433)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       114
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10165
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       114
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       713
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       713
194 Temperature_Celsius     0x0002   171   171   000    Old_age   Always       -       38 (Min/Max 19/60)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       29

SMART Error Log Version: 1
ATA Error Count: 29 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 29 occurred at disk power-on lifetime: 349 hours (14 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 da 1d 40 00      00:11:37.715  READ FPDMA QUEUED
  61 00 00 00 d8 1d 40 00      00:11:34.598  WRITE FPDMA QUEUED
  60 00 00 00 d8 1d 40 00      00:11:34.572  READ FPDMA QUEUED
  61 00 00 00 d6 1d 40 00      00:11:33.538  WRITE FPDMA QUEUED
  60 00 00 00 d6 1d 40 00      00:11:33.508  READ FPDMA QUEUED

Error 28 occurred at disk power-on lifetime: 349 hours (14 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 96 1c 40 00      00:11:07.655  READ FPDMA QUEUED
  61 00 00 00 94 1c 40 00      00:11:06.623  WRITE FPDMA QUEUED
  60 00 00 00 94 1c 40 00      00:11:06.598  READ FPDMA QUEUED
  61 00 00 00 92 1c 40 00      00:11:03.538  WRITE FPDMA QUEUED
  60 00 00 00 92 1c 40 00      00:11:03.512  READ FPDMA QUEUED

Error 27 occurred at disk power-on lifetime: 349 hours (14 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 54 1b 40 00      00:09:51.005  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:09:49.989  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:09:49.989  READ LOG EXT
  60 00 00 00 54 1b 40 00      00:09:49.948  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:09:48.949  READ LOG EXT

Error 26 occurred at disk power-on lifetime: 349 hours (14 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 54 1b 40 00      00:09:49.989  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:09:48.949  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:09:48.949  READ LOG EXT
  60 00 00 00 54 1b 40 00      00:09:48.948  READ FPDMA QUEUED
  61 00 00 00 52 1b 40 00      00:09:44.845  WRITE FPDMA QUEUED

Error 25 occurred at disk power-on lifetime: 349 hours (14 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 54 1b 40 00      00:09:48.949  READ FPDMA QUEUED
  61 00 00 00 52 1b 40 00      00:09:44.845  WRITE FPDMA QUEUED
  60 00 00 00 52 1b 40 00      00:09:44.820  READ FPDMA QUEUED
  61 00 00 00 50 1b 40 00      00:09:39.679  WRITE FPDMA QUEUED
  60 00 00 00 50 1b 40 00      00:09:39.656  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10127         -
# 2  Short offline       Completed without error       00%      9959         -
# 3  Short offline       Completed without error       00%      9792         -
# 4  Short offline       Completed without error       00%      9636         -
# 5  Short offline       Completed without error       00%      9456         -
# 6  Short offline       Completed without error       00%      9288         -
# 7  Short offline       Completed without error       00%      9119         -
# 8  Short offline       Completed without error       00%      8940         -
# 9  Short offline       Completed without error       00%      8760         -
#10  Short offline       Completed without error       00%      8592         -
#11  Short offline       Completed without error       00%      8288         -
#12  Short offline       Completed without error       00%      7974         -
#13  Short offline       Completed without error       00%      7864         -
#14  Short offline       Completed without error       00%      7696         -
#15  Short offline       Completed without error       00%      7535         -
#16  Short offline       Completed without error       00%      7258         -
#17  Short offline       Completed without error       00%      7090         -
#18  Short offline       Completed without error       00%      6922         -
#19  Short offline       Completed without error       00%      6763         -
#20  Short offline       Completed without error       00%      6554         -
#21  Short offline       Completed without error       00%      6395         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da8 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEGL4ZTN
LU WWN Device Id: 5 000cca 267c8416c
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1136) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   151   151   024    Pre-fail  Always       -       436 (Average 435)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       456
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16588
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       186
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   097   097   000    Old_age   Always       -       4656
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       4656
194 Temperature_Celsius     0x0002   171   171   000    Old_age   Always       -       38 (Min/Max 19/60)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       127

SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 127 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fa 1d 40 00      00:11:56.733  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:55.819  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.817  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.815  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.808  FLUSH CACHE EXT

Error 126 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fa 1d 40 00      00:11:55.733  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:54.719  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:54.719  READ LOG EXT
  60 00 00 00 fa 1d 40 00      00:11:54.719  READ FPDMA QUEUED
  60 00 00 00 f8 1d 40 00      00:11:54.680  READ FPDMA QUEUED

Error 125 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fa 1d 40 00      00:11:54.719  READ FPDMA QUEUED
  60 00 00 00 f8 1d 40 00      00:11:54.680  READ FPDMA QUEUED
  60 00 00 00 f6 1d 40 00      00:11:53.625  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:52.719  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:52.640  FLUSH CACHE EXT

Error 124 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f6 1d 40 00      00:11:52.625  READ FPDMA QUEUED
  60 00 00 00 f4 1d 40 00      00:11:52.581  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:51.600  FLUSH CACHE EXT
  2f 00 01 10 00 00 00 00      00:11:51.583  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:51.583  READ LOG EXT

Error 123 occurred at disk power-on lifetime: 6773 hours (282 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f4 1d 40 00      00:11:51.583  READ FPDMA QUEUED
  60 00 00 00 f2 1d 40 00      00:11:51.537  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:50.117  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:50.115  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:50.102  FLUSH CACHE EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16551         -
# 2  Short offline       Completed without error       00%     16383         -
# 3  Short offline       Completed without error       00%     16215         -
# 4  Short offline       Completed without error       00%     16058         -
# 5  Short offline       Completed without error       00%     15879         -
# 6  Short offline       Completed without error       00%     15711         -
# 7  Short offline       Completed without error       00%     15543         -
# 8  Short offline       Completed without error       00%     15362         -
# 9  Short offline       Completed without error       00%     15183         -
#10  Short offline       Completed without error       00%     15015         -
#11  Short offline       Completed without error       00%     14711         -
#12  Short offline       Completed without error       00%     14397         -
#13  Short offline       Completed without error       00%     14287         -
#14  Short offline       Completed without error       00%     14120         -
#15  Short offline       Completed without error       00%     13958         -
#16  Short offline       Completed without error       00%     13682         -
#17  Short offline       Completed without error       00%     13514         -
#18  Short offline       Completed without error       00%     13346         -
#19  Short offline       Completed without error       00%     13186         -
#20  Short offline       Completed without error       00%     12977         -
#21  Short offline       Completed without error       00%     12818         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da7 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate IronWolf
Device Model:     ST10000VN0004-1ZD101
Serial Number:    ZA2C69D9
LU WWN Device Id: 5 000c50 0c3d35bff
Firmware Version: SC61
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  567) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 927) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x50bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   072   064   044    Pre-fail  Always       -       17193368
  3 Spin_Up_Time            0x0003   089   089   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       310
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   045    Pre-fail  Always       -       322285248
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12655
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       142
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1
189 High_Fly_Writes         0x003a   098   098   000    Old_age   Always       -       2
190 Airflow_Temperature_Cel 0x0022   063   043   040    Old_age   Always       -       37 (Min/Max 19/37)
191 G-Sense_Error_Rate      0x0032   098   098   000    Old_age   Always       -       4500
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       534
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       758
194 Temperature_Celsius     0x0022   037   057   000    Old_age   Always       -       37 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   008   002   000    Old_age   Always       -       17193368
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Pressure_Limit          0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12211 (52 145 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       39720540579
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       211238130130

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12618         -
# 2  Short offline       Completed without error       00%     12450         -
# 3  Short offline       Completed without error       00%     12282         -
# 4  Short offline       Completed without error       00%     12114         -
# 5  Short offline       Completed without error       00%     11946         -
# 6  Short offline       Completed without error       00%     11778         -
# 7  Short offline       Completed without error       00%     11609         -
# 8  Short offline       Completed without error       00%     11418         -
# 9  Short offline       Completed without error       00%     11250         -
#10  Short offline       Completed without error       00%     11082         -
#11  Short offline       Completed without error       00%     10771         -
#12  Short offline       Completed without error       00%     10464         -
#13  Short offline       Completed without error       00%     10354         -
#14  Short offline       Completed without error       00%     10186         -
#15  Short offline       Completed without error       00%     10018         -
#16  Short offline       Completed without error       00%      9748         -
#17  Short offline       Completed without error       00%      9580         -
#18  Short offline       Completed without error       00%      9412         -
#19  Short offline       Completed without error       00%      9244         -
#20  Short offline       Completed without error       00%      9044         -
#21  Short offline       Completed without error       00%      8876         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da6 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate IronWolf
Device Model:     ST10000VN0004-1ZD101
Serial Number:    ZA2C69BK
LU WWN Device Id: 5 000c50 0c3d31952
Firmware Version: SC61
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  567) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 938) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x50bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   081   064   044    Pre-fail  Always       -       128321432
  3 Spin_Up_Time            0x0003   089   089   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       267
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   045    Pre-fail  Always       -       323848864
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12762
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       135
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   099   099   000    Old_age   Always       -       1
190 Airflow_Temperature_Cel 0x0022   064   043   040    Old_age   Always       -       36 (Min/Max 19/36)
191 G-Sense_Error_Rate      0x0032   099   099   000    Old_age   Always       -       2398
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       541
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       725
194 Temperature_Celsius     0x0022   036   057   000    Old_age   Always       -       36 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   008   002   000    Old_age   Always       -       128321432
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Pressure_Limit          0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12301 (45 32 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       41761705743
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       228921735375

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12724         -
# 2  Short offline       Completed without error       00%     12556         -
# 3  Short offline       Completed without error       00%     12389         -
# 4  Short offline       Completed without error       00%     12221         -
# 5  Short offline       Completed without error       00%     12052         -
# 6  Short offline       Completed without error       00%     11884         -
# 7  Short offline       Completed without error       00%     11716         -
# 8  Short offline       Completed without error       00%     11525         -
# 9  Short offline       Completed without error       00%     11357         -
#10  Short offline       Completed without error       00%     11189         -
#11  Short offline       Completed without error       00%     10878         -
#12  Short offline       Completed without error       00%     10571         -
#13  Short offline       Completed without error       00%     10460         -
#14  Short offline       Completed without error       00%     10293         -
#15  Short offline       Completed without error       00%     10125         -
#16  Short offline       Completed without error       00%      9855         -
#17  Short offline       Completed without error       00%      9687         -
#18  Short offline       Completed without error       00%      9519         -
#19  Short offline       Completed without error       00%      9351         -
#20  Short offline       Completed without error       00%      9151         -
#21  Short offline       Completed without error       00%      8983         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da5 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEK68WDN
LU WWN Device Id: 5 000cca 267ed2216
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1095) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       438 (Average 439)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       109
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10734
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       109
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       709
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       709
194 Temperature_Celsius     0x0002   180   180   000    Old_age   Always       -       36 (Min/Max 19/58)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       128

SMART Error Log Version: 1
ATA Error Count: 128 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 128 occurred at disk power-on lifetime: 918 hours (38 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f0 1d 40 00      00:11:48.388  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:47.380  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:47.380  READ LOG EXT
  60 00 00 00 f0 1d 40 00      00:11:47.359  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:46.363  READ LOG EXT

Error 127 occurred at disk power-on lifetime: 918 hours (38 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f0 1d 40 00      00:11:47.380  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:46.363  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:46.363  READ LOG EXT
  60 00 00 00 f0 1d 40 00      00:11:46.358  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:45.671  FLUSH CACHE EXT

Error 126 occurred at disk power-on lifetime: 918 hours (38 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f0 1d 40 00      00:11:46.363  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:45.671  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:45.412  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:45.367  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:45.365  FLUSH CACHE EXT

Error 125 occurred at disk power-on lifetime: 918 hours (38 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f0 1d 40 00      00:11:45.350  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:45.334  FLUSH CACHE EXT
  61 00 00 00 ee 1d 40 00      00:11:45.238  WRITE FPDMA QUEUED
  60 00 00 00 ee 1d 40 00      00:11:45.237  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:45.212  FLUSH CACHE EXT

Error 124 occurred at disk power-on lifetime: 918 hours (38 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 ec 1d 40 00      00:11:44.176  READ FPDMA QUEUED
  61 00 00 00 ea 1d 40 00      00:11:44.163  WRITE FPDMA QUEUED
  60 00 00 00 ea 1d 40 00      00:11:44.163  READ FPDMA QUEUED
  61 00 00 00 e8 1d 40 00      00:11:44.127  WRITE FPDMA QUEUED
  60 00 00 00 e8 1d 40 00      00:11:44.119  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10696         -
# 2  Short offline       Completed without error       00%     10528         -
# 3  Short offline       Completed without error       00%     10361         -
# 4  Short offline       Completed without error       00%     10210         -
# 5  Short offline       Completed without error       00%     10025         -
# 6  Short offline       Completed without error       00%      9857         -
# 7  Short offline       Completed without error       00%      9688         -
# 8  Short offline       Completed without error       00%      9513         -
# 9  Short offline       Completed without error       00%      9329         -
#10  Short offline       Completed without error       00%      9161         -
#11  Short offline       Completed without error       00%      8860         -
#12  Short offline       Completed without error       00%      8543         -
#13  Short offline       Completed without error       00%      8433         -
#14  Short offline       Completed without error       00%      8265         -
#15  Short offline       Completed without error       00%      8105         -
#16  Short offline       Completed without error       00%      7827         -
#17  Short offline       Completed without error       00%      7659         -
#18  Short offline       Completed without error       00%      7491         -
#19  Short offline       Completed without error       00%      7333         -
#20  Short offline       Completed without error       00%      7123         -
#21  Short offline       Completed without error       00%      6964         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da4 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEJMN25N
LU WWN Device Id: 5 000cca 267e51d66
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1083) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   148   148   024    Pre-fail  Always       -       444 (Average 442)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       104
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10727
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       104
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       855
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       855
194 Temperature_Celsius     0x0002   191   191   000    Old_age   Always       -       34 (Min/Max 19/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       7

SMART Error Log Version: 1
ATA Error Count: 7 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 7 occurred at disk power-on lifetime: 912 hours (38 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 d8 1d 40 00      00:11:36.697  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:35.671  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:35.671  READ LOG EXT
  60 00 00 00 d8 1d 40 00      00:11:35.655  READ FPDMA QUEUED
  60 00 00 00 d6 1d 40 00      00:11:33.544  READ FPDMA QUEUED

Error 6 occurred at disk power-on lifetime: 912 hours (38 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 d8 1d 40 00      00:11:35.671  READ FPDMA QUEUED
  60 00 00 00 d6 1d 40 00      00:11:33.544  READ FPDMA QUEUED
  60 00 00 00 d4 1d 40 00      00:11:32.488  READ FPDMA QUEUED
  60 00 00 00 d2 1d 40 00      00:11:31.419  READ FPDMA QUEUED
  60 00 00 00 d0 1d 40 00      00:11:31.385  READ FPDMA QUEUED

Error 5 occurred at disk power-on lifetime: 912 hours (38 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 88 1b 40 00      00:10:21.888  READ FPDMA QUEUED
  60 00 00 00 86 1b 40 00      00:10:21.787  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:10:20.787  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:10:20.787  READ LOG EXT
  60 00 00 00 86 1b 40 00      00:10:20.787  READ FPDMA QUEUED

Error 4 occurred at disk power-on lifetime: 912 hours (38 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 86 1b 40 00      00:10:20.787  READ FPDMA QUEUED
  60 00 00 00 84 1b 40 00      00:10:17.646  READ FPDMA QUEUED
  60 00 00 00 82 1b 40 00      00:10:17.617  READ FPDMA QUEUED
  60 00 00 00 80 1b 40 00      00:10:14.406  READ FPDMA QUEUED
  60 00 00 00 7e 1b 40 00      00:10:13.359  READ FPDMA QUEUED

Error 3 occurred at disk power-on lifetime: 912 hours (38 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 52 1b 40 00      00:09:46.869  READ FPDMA QUEUED
  60 00 00 00 50 1b 40 00      00:09:41.745  READ FPDMA QUEUED
  60 00 00 00 4e 1b 40 00      00:09:34.586  READ FPDMA QUEUED
  60 00 00 00 4c 1b 40 00      00:09:34.575  READ FPDMA QUEUED
  60 00 00 00 4a 1b 40 00      00:09:34.561  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10690         -
# 2  Short offline       Completed without error       00%     10522         -
# 3  Short offline       Completed without error       00%     10354         -
# 4  Short offline       Completed without error       00%     10204         -
# 5  Short offline       Completed without error       00%     10018         -
# 6  Short offline       Completed without error       00%      9850         -
# 7  Short offline       Completed without error       00%      9682         -
# 8  Short offline       Completed without error       00%      9507         -
# 9  Short offline       Completed without error       00%      9322         -
#10  Short offline       Completed without error       00%      9154         -
#11  Short offline       Completed without error       00%      8854         -
#12  Short offline       Completed without error       00%      8536         -
#13  Short offline       Completed without error       00%      8426         -
#14  Short offline       Completed without error       00%      8258         -
#15  Short offline       Completed without error       00%      8100         -
#16  Short offline       Completed without error       00%      7821         -
#17  Short offline       Completed without error       00%      7653         -
#18  Short offline       Completed without error       00%      7485         -
#19  Short offline       Completed without error       00%      7326         -
#20  Short offline       Completed without error       00%      7116         -
#21  Short offline       Completed without error       00%      6958         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da3 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate IronWolf
Device Model:     ST10000VN0004-1ZD101
Serial Number:    ZA2C692W
LU WWN Device Id: 5 000c50 0c3d3442f
Firmware Version: SC61
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  567) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 912) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x50bd)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   081   064   044    Pre-fail  Always       -       116129976
  3 Spin_Up_Time            0x0003   089   089   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       260
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   045    Pre-fail  Always       -       243573215
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12576
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       136
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   075   075   000    Old_age   Always       -       25
190 Airflow_Temperature_Cel 0x0022   066   041   040    Old_age   Always       -       34 (Min/Max 19/34)
191 G-Sense_Error_Rate      0x0032   099   099   000    Old_age   Always       -       3168
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       531
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       708
194 Temperature_Celsius     0x0022   034   059   000    Old_age   Always       -       34 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   009   004   000    Old_age   Always       -       116129976
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
200 Pressure_Limit          0x0023   100   100   001    Pre-fail  Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12118 (179 141 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       41592304737
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       221696219432

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12538         -
# 2  Short offline       Completed without error       00%     12370         -
# 3  Short offline       Completed without error       00%     12203         -
# 4  Short offline       Completed without error       00%     12035         -
# 5  Short offline       Completed without error       00%     11867         -
# 6  Short offline       Completed without error       00%     11698         -
# 7  Short offline       Completed without error       00%     11530         -
# 8  Short offline       Completed without error       00%     11339         -
# 9  Short offline       Completed without error       00%     11171         -
#10  Short offline       Completed without error       00%     11003         -
#11  Short offline       Completed without error       00%     10692         -
#12  Short offline       Completed without error       00%     10385         -
#13  Short offline       Completed without error       00%     10274         -
#14  Short offline       Completed without error       00%     10107         -
#15  Short offline       Completed without error       00%      9939         -
#16  Short offline       Completed without error       00%      9669         -
#17  Short offline       Completed without error       00%      9501         -
#18  Short offline       Completed without error       00%      9333         -
#19  Short offline       Completed without error       00%      9165         -
#20  Short offline       Completed without error       00%      8965         -
#21  Short offline       Completed without error       00%      8797         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da2 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EGEYT1Z
LU WWN Device Id: 5 000cca 27ec65899
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1291) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   128   128   054    Old_age   Offline      -       116
  3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       438 (Average 438)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       180
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10773
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       180
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       863
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       863
194 Temperature_Celsius     0x0002   185   185   000    Old_age   Always       -       35 (Min/Max 11/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       14

SMART Error Log Version: 1
ATA Error Count: 14 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 14 occurred at disk power-on lifetime: 957 hours (39 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fc 1d 40 00      00:11:58.836  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:57.787  FLUSH CACHE EXT
  2f 00 01 10 00 00 00 00      00:11:57.786  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:57.786  READ LOG EXT
  60 00 00 00 fc 1d 40 00      00:11:57.757  READ FPDMA QUEUED

Error 13 occurred at disk power-on lifetime: 957 hours (39 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 fc 1d 40 00      00:11:57.786  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:57.738  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.813  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.811  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:55.810  FLUSH CACHE EXT

Error 12 occurred at disk power-on lifetime: 957 hours (39 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 94 1c 40 00      00:11:05.543  READ FPDMA QUEUED
  61 00 00 00 92 1c 40 00      00:11:03.489  WRITE FPDMA QUEUED
  60 00 00 00 92 1c 40 00      00:11:03.489  READ FPDMA QUEUED
  61 00 00 00 90 1c 40 00      00:11:02.392  WRITE FPDMA QUEUED
  60 00 00 00 90 1c 40 00      00:11:02.391  READ FPDMA QUEUED

Error 11 occurred at disk power-on lifetime: 957 hours (39 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 8c 1c 40 00      00:11:01.316  READ FPDMA QUEUED
  61 00 00 00 8a 1c 40 00      00:11:00.278  WRITE FPDMA QUEUED
  60 00 00 00 8a 1c 40 00      00:11:00.278  READ FPDMA QUEUED
  61 00 00 00 88 1c 40 00      00:11:00.267  WRITE FPDMA QUEUED
  60 00 00 00 88 1c 40 00      00:11:00.266  READ FPDMA QUEUED

Error 10 occurred at disk power-on lifetime: 957 hours (39 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 f2 1b 40 00      00:10:37.352  READ FPDMA QUEUED
  61 00 00 00 f0 1b 40 00      00:10:37.318  WRITE FPDMA QUEUED
  60 00 00 00 f0 1b 40 00      00:10:37.317  READ FPDMA QUEUED
  61 00 00 00 ee 1b 40 00      00:10:37.300  WRITE FPDMA QUEUED
  60 00 00 00 ee 1b 40 00      00:10:37.300  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10735         -
# 2  Short offline       Completed without error       00%     10567         -
# 3  Short offline       Completed without error       00%     10400         -
# 4  Short offline       Completed without error       00%     10249         -
# 5  Short offline       Completed without error       00%     10064         -
# 6  Short offline       Completed without error       00%      9896         -
# 7  Short offline       Completed without error       00%      9727         -
# 8  Short offline       Completed without error       00%      9552         -
# 9  Short offline       Completed without error       00%      9368         -
#10  Short offline       Completed without error       00%      9200         -
#11  Short offline       Completed without error       00%      8904         -
#12  Short offline       Completed without error       00%      8582         -
#13  Short offline       Completed without error       00%      8472         -
#14  Short offline       Completed without error       00%      8304         -
#15  Short offline       Completed without error       00%      8144         -
#16  Short offline       Completed without error       00%      7866         -
#17  Short offline       Completed without error       00%      7698         -
#18  Short offline       Completed without error       00%      7530         -
#19  Short offline       Completed without error       00%      7372         -
#20  Short offline       Completed without error       00%      7162         -
#21  Short offline       Completed without error       00%      7003         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da1 (NOT USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    JEJSP03N
LU WWN Device Id: 5 000cca 267e6f263
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1149) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   130   130   054    Old_age   Offline      -       108
  3 Spin_Up_Time            0x0007   149   149   024    Pre-fail  Always       -       443 (Average 440)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       105
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       10749
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       105
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       941
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       941
194 Temperature_Celsius     0x0002   203   203   000    Old_age   Always       -       32 (Min/Max 19/60)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       42

SMART Error Log Version: 1
ATA Error Count: 42 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 42 occurred at disk power-on lifetime: 934 hours (38 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 3b 00 85 80 18 40 00      00:11:54.756  READ FPDMA QUEUED
  60 00 00 00 fa 1d 40 00      00:11:54.716  READ FPDMA QUEUED
  60 00 00 00 f8 1d 40 00      00:11:54.677  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:53.764  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:53.764  READ LOG EXT

Error 41 occurred at disk power-on lifetime: 934 hours (38 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 3b 00 85 80 18 40 00      00:11:53.764  READ FPDMA QUEUED
  2f 00 01 10 00 00 00 00      00:11:52.729  READ LOG EXT
  2f 00 01 10 00 00 00 00      00:11:52.729  READ LOG EXT
  60 3b 00 85 80 18 40 00      00:11:52.729  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:52.720  FLUSH CACHE EXT

Error 40 occurred at disk power-on lifetime: 934 hours (38 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 3b 00 85 80 18 40 00      00:11:52.729  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:52.720  FLUSH CACHE EXT
  ea 00 00 00 00 00 00 00      00:11:52.641  FLUSH CACHE EXT
  60 00 00 00 f6 1d 40 00      00:11:52.622  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00      00:11:51.601  FLUSH CACHE EXT

Error 39 occurred at disk power-on lifetime: 934 hours (38 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 da 1d 40 00      00:11:38.750  READ FPDMA QUEUED
  60 00 00 00 d8 1d 40 00      00:11:34.599  READ FPDMA QUEUED
  60 00 00 00 d6 1d 40 00      00:11:33.540  READ FPDMA QUEUED
  60 00 00 00 d4 1d 40 00      00:11:32.480  READ FPDMA QUEUED
  60 00 00 00 d2 1d 40 00      00:11:31.397  READ FPDMA QUEUED

Error 38 occurred at disk power-on lifetime: 934 hours (38 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 c2 1d 40 00      00:11:27.809  READ FPDMA QUEUED
  60 00 00 00 c0 1d 40 00      00:11:27.767  READ FPDMA QUEUED
  60 00 00 00 be 1d 40 00      00:11:25.691  READ FPDMA QUEUED
  60 00 00 00 bc 1d 40 00      00:11:25.679  READ FPDMA QUEUED
  60 00 00 00 ba 1d 40 00      00:11:25.667  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10712         -
# 2  Short offline       Completed without error       00%     10544         -
# 3  Short offline       Completed without error       00%     10376         -
# 4  Short offline       Completed without error       00%     10226         -
# 5  Short offline       Completed without error       00%     10040         -
# 6  Short offline       Completed without error       00%      9872         -
# 7  Short offline       Completed without error       00%      9704         -
# 8  Short offline       Completed without error       00%      9529         -
# 9  Short offline       Completed without error       00%      9344         -
#10  Short offline       Completed without error       00%      9176         -
#11  Short offline       Completed without error       00%      8875         -
#12  Short offline       Completed without error       00%      8558         -
#13  Short offline       Completed without error       00%      8448         -
#14  Short offline       Completed without error       00%      8280         -
#15  Short offline       Completed without error       00%      8121         -
#16  Short offline       Completed without error       00%      7843         -
#17  Short offline       Completed without error       00%      7675         -
#18  Short offline       Completed without error       00%      7507         -
#19  Short offline       Completed without error       00%      7348         -
#20  Short offline       Completed without error       00%      7138         -
#21  Short offline       Completed without error       00%      6980         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/da0 (USING TRANSLATION)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Ultrastar He10/12
Device Model:     WDC WD100EMAZ-00WJTA0
Serial Number:    1EGG5R6Z
LU WWN Device Id: 5 000cca 27ec672a7
Firmware Version: 83.H0A83
User Capacity:    10,000,831,348,736 bytes [10.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (1215) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   129   129   054    Old_age   Offline      -       112
  3 Spin_Up_Time            0x0007   146   146   024    Pre-fail  Always       -       448 (Average 450)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       54
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       9512
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       54
 22 Helium_Level            0x0023   100   100   025    Pre-fail  Always       -       100
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       457
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       457
194 Temperature_Celsius     0x0002   203   203   000    Old_age   Always       -       32 (Min/Max 19/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      9475         -
# 2  Short offline       Completed without error       00%      9306         -
# 3  Short offline       Completed without error       00%      9139         -
# 4  Short offline       Completed without error       00%      8982         -
# 5  Short offline       Completed without error       00%      8803         -
# 6  Short offline       Completed without error       00%      8635         -
# 7  Short offline       Completed without error       00%      8466         -
# 8  Short offline       Completed without error       00%      8286         -
# 9  Short offline       Completed without error       00%      8107         -
#10  Short offline       Completed without error       00%      7939         -
#11  Short offline       Completed without error       00%      7635         -
#12  Short offline       Completed without error       00%      7321         -
#13  Short offline       Completed without error       00%      7211         -
#14  Short offline       Completed without error       00%      7043         -
#15  Short offline       Completed without error       00%      6882         -
#16  Short offline       Completed without error       00%      6605         -
#17  Short offline       Completed without error       00%      6437         -
#18  Short offline       Completed without error       00%      6269         -
#19  Short offline       Completed without error       00%      6110         -
#20  Short offline       Completed without error       00%      5901         -
#21  Short offline       Completed without error       00%      5742         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada1 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Phison Driven SSDs
Device Model:     KINGSTON SA400S37120G
Serial Number:    50026B73801FAB16
LU WWN Device Id: 5 0026b7 3801fab16
Firmware Version: SBFKB1D1
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       12692
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       128
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Write_Protect_Mode      0x0000   100   100   000    Old_age   Offline      -       0
168 SATA_Phy_Error_Count    0x0012   100   100   000    Old_age   Always       -       0
169 Bad_Block_Rate          0x0000   100   100   000    Old_age   Offline      -       10
170 Bad_Blk_Ct_Erl/Lat      0x0000   100   100   010    Old_age   Offline      -       0/7
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 MaxAvgErase_Ct          0x0000   100   100   000    Old_age   Offline      -       64 (Average 28)
181 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Unsafe_Shutdown_Count   0x0012   100   100   000    Old_age   Always       -       41
194 Temperature_Celsius     0x0022   069   048   000    Old_age   Always       -       31 (Min/Max 22/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 SATA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 CRC_Error_Count         0x0032   100   100   000    Old_age   Always       -       0
231 SSD_Life_Left           0x0000   097   097   000    Old_age   Offline      -       97
233 Flash_Writes_GiB        0x0032   100   100   000    Old_age   Always       -       2079
241 Lifetime_Writes_GiB     0x0032   100   100   000    Old_age   Always       -       1068
242 Lifetime_Reads_GiB      0x0032   100   100   000    Old_age   Always       -       983
244 Average_Erase_Count     0x0000   100   100   000    Old_age   Offline      -       28
245 Max_Erase_Count         0x0000   100   100   000    Old_age   Offline      -       64
246 Total_Erase_Count       0x0000   100   100   000    Old_age   Offline      -       111112

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12655         -
# 2  Short offline       Completed without error       00%     12487         -
# 3  Short offline       Completed without error       00%     12319         -
# 4  Short offline       Completed without error       00%     12151         -
# 5  Short offline       Completed without error       00%     11983         -
# 6  Short offline       Completed without error       00%     11815         -
# 7  Short offline       Completed without error       00%     11647         -
# 8  Short offline       Completed without error       00%     11455         -
# 9  Short offline       Completed without error       00%     11287         -
#10  Short offline       Completed without error       00%     11119         -
#11  Short offline       Completed without error       00%     10809         -
#12  Short offline       Completed without error       00%     10501         -
#13  Short offline       Completed without error       00%     10391         -
#14  Short offline       Completed without error       00%     10224         -
#15  Short offline       Completed without error       00%     10056         -
#16  Short offline       Completed without error       00%      9786         -
#17  Short offline       Completed without error       00%      9618         -
#18  Short offline       Completed without error       00%      9450         -
#19  Short offline       Completed without error       00%      9282         -
#20  Short offline       Completed without error       00%      9082         -
#21  Short offline       Completed without error       00%      8914         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada0 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Phison Driven SSDs
Device Model:     KINGSTON SA400S37120G
Serial Number:    50026B73801FAB14
LU WWN Device Id: 5 0026b7 3801fab14
Firmware Version: SBFKB1D1
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Feb 16 11:42:56 2022 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  30) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   000   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       12693
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       129
148 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
149 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
167 Write_Protect_Mode      0x0000   100   100   000    Old_age   Offline      -       0
168 SATA_Phy_Error_Count    0x0012   100   100   000    Old_age   Always       -       0
169 Bad_Block_Rate          0x0000   100   100   000    Old_age   Offline      -       11
170 Bad_Blk_Ct_Erl/Lat      0x0000   100   100   010    Old_age   Offline      -       0/8
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 MaxAvgErase_Ct          0x0000   100   100   000    Old_age   Offline      -       66 (Average 28)
181 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0000   100   100   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
192 Unsafe_Shutdown_Count   0x0012   100   100   000    Old_age   Always       -       42
194 Temperature_Celsius     0x0022   069   048   000    Old_age   Always       -       31 (Min/Max 22/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
199 SATA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 CRC_Error_Count         0x0032   100   100   000    Old_age   Always       -       0
231 SSD_Life_Left           0x0000   097   097   000    Old_age   Offline      -       97
233 Flash_Writes_GiB        0x0032   100   100   000    Old_age   Always       -       2084
241 Lifetime_Writes_GiB     0x0032   100   100   000    Old_age   Always       -       1069
242 Lifetime_Reads_GiB      0x0032   100   100   000    Old_age   Always       -       1016
244 Average_Erase_Count     0x0000   100   100   000    Old_age   Offline      -       28
245 Max_Erase_Count         0x0000   100   100   000    Old_age   Offline      -       66
246 Total_Erase_Count       0x0000   100   100   000    Old_age   Offline      -       109816

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12655         -
# 2  Short offline       Completed without error       00%     12487         -
# 3  Short offline       Completed without error       00%     12319         -
# 4  Short offline       Completed without error       00%     12151         -
# 5  Short offline       Completed without error       00%     11983         -
# 6  Short offline       Completed without error       00%     11815         -
# 7  Short offline       Completed without error       00%     11647         -
# 8  Short offline       Completed without error       00%     11456         -
# 9  Short offline       Completed without error       00%     11288         -
#10  Short offline       Completed without error       00%     11120         -
#11  Short offline       Completed without error       00%     10809         -
#12  Short offline       Completed without error       00%     10502         -
#13  Short offline       Completed without error       00%     10391         -
#14  Short offline       Completed without error       00%     10224         -
#15  Short offline       Completed without error       00%     10056         -
#16  Short offline       Completed without error       00%      9786         -
#17  Short offline       Completed without error       00%      9618         -
#18  Short offline       Completed without error       00%      9450         -
#19  Short offline       Completed without error       00%      9282         -
#20  Short offline       Completed without error       00%      9082         -
#21  Short offline       Completed without error       00%      8914         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/nvme3 (NVME DEVICE DETECTED)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX8200PNP
Serial Number:                      2K23291NGECA
Firmware Version:                   32A0T2IA
PCI Vendor/Subsystem ID:            0x1cc1
IEEE OUI Identifier:                0x000000
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Utilization:            1,023,963,770,880 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Feb 16 11:42:57 2022 PST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0b):         S/H_per_NS Cmd_Eff_Lg Telmtry_Lg
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     75 Celsius
Critical Comp. Temp. Threshold:     80 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     9.00W       -        -    0  0  0  0        0       0
 1 +     4.60W       -        -    1  1  1  1        0       0
 2 +     3.80W       -        -    2  2  2  2        0       0
 3 -   0.0450W       -        -    3  3  3  3     2000    2000
 4 -   0.0040W       -        -    4  4  4  4    15000   15000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        35 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    1%
Data Units Read:                    7,549,935 [3.86 TB]
Data Units Written:                 16,202,112 [8.29 TB]
Host Read Commands:                 32,955,150
Host Write Commands:                50,048,354
Controller Busy Time:               921
Power Cycles:                       217
Power On Hours:                     4,574
Unsafe Shutdowns:                   38
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 2:               35 Celsius
Temperature Sensor 3:               39 Celsius
Temperature Sensor 4:               35 Celsius
Temperature Sensor 5:               35 Celsius
Temperature Sensor 6:               30 Celsius
Thermal Temp. 1 Transition Count:   16
Thermal Temp. 2 Transition Count:   12
Thermal Temp. 1 Total Time:         166
Thermal Temp. 2 Total Time:         560

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

/dev/nvme2 (NVME DEVICE DETECTED)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX8200PNP
Serial Number:                      2K232LAHDCTH
Firmware Version:                   32A0T2IA
PCI Vendor/Subsystem ID:            0x1cc1
IEEE OUI Identifier:                0x000000
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Utilization:            1,023,185,096,704 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Feb 16 11:42:57 2022 PST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0b):         S/H_per_NS Cmd_Eff_Lg Telmtry_Lg
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     75 Celsius
Critical Comp. Temp. Threshold:     80 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     9.00W       -        -    0  0  0  0        0       0
 1 +     4.60W       -        -    1  1  1  1        0       0
 2 +     3.80W       -        -    2  2  2  2        0       0
 3 -   0.0450W       -        -    3  3  3  3     2000    2000
 4 -   0.0040W       -        -    4  4  4  4    15000   15000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        35 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    1%
Data Units Read:                    10,760,057 [5.50 TB]
Data Units Written:                 14,488,051 [7.41 TB]
Host Read Commands:                 29,430,236
Host Write Commands:                40,844,162
Controller Busy Time:               732
Power Cycles:                       169
Power On Hours:                     4,456
Unsafe Shutdowns:                   35
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 2:               35 Celsius
Temperature Sensor 3:               39 Celsius
Temperature Sensor 4:               35 Celsius
Temperature Sensor 5:               35 Celsius
Temperature Sensor 6:               30 Celsius
Thermal Temp. 1 Transition Count:   36
Thermal Temp. 2 Transition Count:   16
Thermal Temp. 1 Total Time:         1529
Thermal Temp. 2 Total Time:         341

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

/dev/nvme1 (NVME DEVICE DETECTED)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX8200PNP
Serial Number:                      2J3720178669
Firmware Version:                   SS0411B
PCI Vendor/Subsystem ID:            0x1cc1
IEEE OUI Identifier:                0x000000
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Utilization:            1,021,267,001,344 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Feb 16 11:42:57 2022 PST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f):         S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     75 Celsius
Critical Comp. Temp. Threshold:     80 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     9.00W       -        -    0  0  0  0        0       0
 1 +     4.60W       -        -    1  1  1  1        0       0
 2 +     3.80W       -        -    2  2  2  2        0       0
 3 -   0.0450W       -        -    3  3  3  3     2000    2000
 4 -   0.0040W       -        -    4  4  4  4    15000   15000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        34 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    1%
Data Units Read:                    18,003,889 [9.21 TB]
Data Units Written:                 25,444,962 [13.0 TB]
Host Read Commands:                 112,980,526
Host Write Commands:                238,918,909
Controller Busy Time:               4,271
Power Cycles:                       270
Power On Hours:                     6,961
Unsafe Shutdowns:                   63
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Thermal Temp. 1 Transition Count:   50
Thermal Temp. 1 Total Time:         388

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

/dev/nvme0 (NVME DEVICE DETECTED)
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       ADATA SX8200PNP
Serial Number:                      2J3720180314
Firmware Version:                   SS0411B
PCI Vendor/Subsystem ID:            0x1cc1
IEEE OUI Identifier:                0x000000
Controller ID:                      1
NVMe Version:                       1.3
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Utilization:            1,023,946,625,024 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Feb 16 11:42:57 2022 PST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f):         S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     75 Celsius
Critical Comp. Temp. Threshold:     80 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     9.00W       -        -    0  0  0  0        0       0
 1 +     4.60W       -        -    1  1  1  1        0       0
 2 +     3.80W       -        -    2  2  2  2        0       0
 3 -   0.0450W       -        -    3  3  3  3     2000    2000
 4 -   0.0040W       -        -    4  4  4  4    15000   15000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        34 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    1%
Data Units Read:                    12,307,661 [6.30 TB]
Data Units Written:                 20,329,144 [10.4 TB]
Host Read Commands:                 42,395,708
Host Write Commands:                54,888,050
Controller Busy Time:               1,010
Power Cycles:                       294
Power On Hours:                     5,312
Unsafe Shutdowns:                   69
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Thermal Temp. 1 Transition Count:   40
Thermal Temp. 1 Total Time:         345

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

debug finished in 2 seconds for smartctl output


