+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1641993217                         +
+--------------------------------------------------------------------------------+
SMARTD will start on boot.
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1641993217                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 1298.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1641993217                        +
+--------------------------------------------------------------------------------+
                 id = 1
     smarttest_type = S
     smarttest_desc = Smart Test
     smarttest_hour = 0
 smarttest_daymonth = *
    smarttest_month = *
  smarttest_dayweek = *
smarttest_all_disks = 1

                 id = 2
     smarttest_type = L
     smarttest_desc = 
     smarttest_hour = 0
 smarttest_daymonth = *
    smarttest_month = *
  smarttest_dayweek = sun
smarttest_all_disks = 1

                 id = 3
     smarttest_type = C
     smarttest_desc = 
     smarttest_hour = 0
 smarttest_daymonth = 1
    smarttest_month = *
  smarttest_dayweek = *
smarttest_all_disks = 1
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1641993217                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                          smartctl output @1641993217                           +
+--------------------------------------------------------------------------------+
/dev/ada4 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Desktop SSHD
Device Model:     ST2000DX001-1CM164
Serial Number:    Z1E6BD6D
LU WWN Device Id: 5 000c50 06575579e
Firmware Version: CC43
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 12 13:13:37 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  592) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 218) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1081)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   112   084   006    Pre-fail  Always       -       179544984
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       62
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       243545669
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       12258
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       78
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       4704
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1 1 2
189 High_Fly_Writes         0x003a   062   062   000    Old_age   Always       -       38
190 Airflow_Temperature_Cel 0x0022   070   049   045    Old_age   Always       -       30 (Min/Max 27/39)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       45
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1919
194 Temperature_Celsius     0x0022   030   051   000    Old_age   Always       -       30 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       9361h+53m+13.314s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       33294417041
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7688221058

SMART Error Log Version: 1
ATA Error Count: 4760 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4760 occurred at disk power-on lifetime: 11457 hours (477 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 87 57 0d 08  Error: UNC at LBA = 0x080d5787 = 135092103

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 03 01 87 57 0d 48 00      03:46:26.841  READ VERIFY SECTOR(S) EXT
  25 03 01 00 00 00 40 00      03:46:26.839  READ DMA EXT
  42 03 01 86 57 0d 48 00      03:46:23.206  READ VERIFY SECTOR(S) EXT
  42 03 01 85 57 0d 48 00      03:46:19.589  READ VERIFY SECTOR(S) EXT
  42 03 01 84 57 0d 48 00      03:46:15.992  READ VERIFY SECTOR(S) EXT

Error 4759 occurred at disk power-on lifetime: 11457 hours (477 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 87 57 0d 08  Error: UNC at LBA = 0x080d5787 = 135092103

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 03 01 87 57 0d 48 00      03:46:26.841  READ VERIFY SECTOR(S) EXT
  25 03 01 00 00 00 40 00      03:46:26.839  READ DMA EXT
  42 03 01 86 57 0d 48 00      03:46:23.206  READ VERIFY SECTOR(S) EXT
  42 03 01 85 57 0d 48 00      03:46:19.589  READ VERIFY SECTOR(S) EXT
  42 03 01 84 57 0d 48 00      03:46:15.992  READ VERIFY SECTOR(S) EXT

Error 4758 occurred at disk power-on lifetime: 11457 hours (477 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 86 57 0d 08  Error: UNC at LBA = 0x080d5786 = 135092102

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 03 01 86 57 0d 48 00      03:46:23.206  READ VERIFY SECTOR(S) EXT
  42 03 01 85 57 0d 48 00      03:46:19.589  READ VERIFY SECTOR(S) EXT
  42 03 01 84 57 0d 48 00      03:46:15.992  READ VERIFY SECTOR(S) EXT
  25 03 08 ff ff ff 4f 00      03:46:15.971  READ DMA EXT
  42 03 01 83 57 0d 48 00      03:46:12.550  READ VERIFY SECTOR(S) EXT

Error 4757 occurred at disk power-on lifetime: 11457 hours (477 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 86 57 0d 08  Error: UNC at LBA = 0x080d5786 = 135092102

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 03 01 86 57 0d 48 00      03:46:23.206  READ VERIFY SECTOR(S) EXT
  42 03 01 85 57 0d 48 00      03:46:19.589  READ VERIFY SECTOR(S) EXT
  42 03 01 84 57 0d 48 00      03:46:15.992  READ VERIFY SECTOR(S) EXT
  25 03 08 ff ff ff 4f 00      03:46:15.971  READ DMA EXT
  42 03 01 83 57 0d 48 00      03:46:12.550  READ VERIFY SECTOR(S) EXT

Error 4756 occurred at disk power-on lifetime: 11457 hours (477 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 85 57 0d 08  Error: UNC at LBA = 0x080d5785 = 135092101

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 03 01 85 57 0d 48 00      03:46:19.589  READ VERIFY SECTOR(S) EXT
  42 03 01 84 57 0d 48 00      03:46:15.992  READ VERIFY SECTOR(S) EXT
  25 03 08 ff ff ff 4f 00      03:46:15.971  READ DMA EXT
  42 03 01 83 57 0d 48 00      03:46:12.550  READ VERIFY SECTOR(S) EXT
  25 03 08 00 00 00 40 00      03:46:12.503  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12245         -
# 2  Short offline       Completed without error       00%     12221         -
# 3  Short offline       Completed without error       00%     12197         -
# 4  Short offline       Completed without error       00%     12173         -
# 5  Extended offline    Completed without error       00%     12165         -
# 6  Short offline       Completed without error       00%     12149         -
# 7  Short offline       Completed without error       00%     12125         -
# 8  Short offline       Completed without error       00%     12101         -
# 9  Short offline       Completed without error       00%     12077         -
#10  Short offline       Completed without error       00%     12053         -
#11  Short offline       Completed without error       00%     12029         -
#12  Short offline       Completed without error       00%     12005         -
#13  Short offline       Completed without error       00%     11981         -
#14  Short offline       Completed without error       00%     11957         -
#15  Short offline       Completed without error       00%     11933         -
#16  Short offline       Completed without error       00%     11909         -
#17  Short offline       Completed without error       00%     11885         -
#18  Short offline       Completed without error       00%     11861         -
#19  Short offline       Completed without error       00%     11837         -
#20  Short offline       Completed without error       00%     11813         -
#21  Short offline       Completed without error       00%     11789         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada3 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Desktop SSHD
Device Model:     ST2000DX001-1CM164
Serial Number:    Z1E7FT7S
LU WWN Device Id: 5 000c50 0664d8a74
Firmware Version: CC43
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 12 13:13:37 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  584) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 221) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x1081)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   100   006    Pre-fail  Always       -       36458408
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       24
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       341586
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       718
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       29
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   048   045    Old_age   Always       -       33 (Min/Max 30/43)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       18
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       39
194 Temperature_Celsius     0x0022   033   052   000    Old_age   Always       -       33 (0 21 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       746h+43m+23.784s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       4101796228
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       7844304543

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       705         -
# 2  Short offline       Completed without error       00%       681         -
# 3  Short offline       Completed without error       00%       657         -
# 4  Short offline       Completed without error       00%       633         -
# 5  Extended offline    Completed without error       00%       626         -
# 6  Short offline       Completed without error       00%       609         -
# 7  Short offline       Completed without error       00%       586         -
# 8  Short offline       Completed without error       00%       562         -
# 9  Short offline       Completed without error       00%       538         -
#10  Short offline       Completed without error       00%       514         -
#11  Short offline       Completed without error       00%       490         -
#12  Short offline       Completed without error       00%       466         -
#13  Short offline       Completed without error       00%       442         -
#14  Short offline       Completed without error       00%       417         -
#15  Short offline       Completed without error       00%       393         -
#16  Short offline       Completed without error       00%       369         -
#17  Short offline       Completed without error       00%       345         -
#18  Short offline       Completed without error       00%       321         -
#19  Short offline       Completed without error       00%       297         -
#20  Short offline       Completed without error       00%       273         -
#21  Short offline       Completed without error       00%       249         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada2 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Video 3.5 HDD
Device Model:     ST4000VM000-1F3168
Serial Number:    Z302CNBY
LU WWN Device Id: 5 000c50 0794cf8a4
Firmware Version: SC25
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5900 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 12 13:13:38 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  117) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 517) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x10b9)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   108   099   006    Pre-fail  Always       -       17442320
  3 Spin_Up_Time            0x0003   093   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       24
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       243791225
  9 Power_On_Hours          0x0032   050   050   000    Old_age   Always       -       44287
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       24
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       4240
190 Airflow_Temperature_Cel 0x0022   072   050   045    Old_age   Always       -       28 (Min/Max 25/36)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       22
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       24
194 Temperature_Celsius     0x0022   028   050   000    Old_age   Always       -       28 (0 13 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     44274         -
# 2  Short offline       Completed without error       00%     44250         -
# 3  Short offline       Completed without error       00%     44226         -
# 4  Short offline       Completed without error       00%     44202         -
# 5  Short offline       Completed without error       00%     44178         -
# 6  Short offline       Completed without error       00%     44154         -
# 7  Short offline       Completed without error       00%     44130         -
# 8  Short offline       Completed without error       00%     44106         -
# 9  Short offline       Completed without error       00%     44082         -
#10  Short offline       Completed without error       00%     44058         -
#11  Short offline       Completed without error       00%     44034         -
#12  Short offline       Completed without error       00%     44010         -
#13  Short offline       Completed without error       00%     43986         -
#14  Short offline       Completed without error       00%     43962         -
#15  Short offline       Completed without error       00%     43938         -
#16  Short offline       Completed without error       00%     43914         -
#17  Short offline       Completed without error       00%     43890         -
#18  Short offline       Completed without error       00%     43866         -
#19  Short offline       Completed without error       00%     43842         -
#20  Short offline       Completed without error       00%     43818         -
#21  Short offline       Completed without error       00%     43794         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada1 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Video 3.5 HDD
Device Model:     ST4000VM000-1F3168
Serial Number:    Z302YRHP
LU WWN Device Id: 5 000c50 07a216583
Firmware Version: SC25
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5900 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 12 13:13:38 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   97) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 488) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x10b9)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   099   006    Pre-fail  Always       -       1565496
  3 Spin_Up_Time            0x0003   093   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   037   037   020    Old_age   Always       -       65535
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   083   060   030    Pre-fail  Always       -       214434817
  9 Power_On_Hours          0x0032   051   051   000    Old_age   Always       -       43086
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       23
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   001   001   000    Old_age   Always       -       1678
190 Airflow_Temperature_Cel 0x0022   068   050   045    Old_age   Always       -       32 (Min/Max 28/40)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       22
193 Load_Cycle_Count        0x0032   065   065   000    Old_age   Always       -       71831
194 Temperature_Celsius     0x0022   032   050   000    Old_age   Always       -       32 (0 19 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     43073         -
# 2  Short offline       Completed without error       00%     43049         -
# 3  Short offline       Completed without error       00%     43025         -
# 4  Short offline       Completed without error       00%     43001         -
# 5  Short offline       Completed without error       00%     42977         -
# 6  Short offline       Completed without error       00%     42953         -
# 7  Short offline       Completed without error       00%     42929         -
# 8  Short offline       Completed without error       00%     42905         -
# 9  Short offline       Completed without error       00%     42881         -
#10  Short offline       Completed without error       00%     42857         -
#11  Short offline       Completed without error       00%     42833         -
#12  Short offline       Completed without error       00%     42809         -
#13  Short offline       Completed without error       00%     42785         -
#14  Short offline       Completed without error       00%     42761         -
#15  Short offline       Completed without error       00%     42737         -
#16  Short offline       Completed without error       00%     42713         -
#17  Short offline       Completed without error       00%     42689         -
#18  Short offline       Completed without error       00%     42665         -
#19  Short offline       Completed without error       00%     42641         -
#20  Short offline       Completed without error       00%     42617         -
#21  Short offline       Completed without error       00%     42593         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada0 
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p11 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Marvell based SanDisk SSDs
Device Model:     SanDisk SD8SN8U-128G-1006
Serial Number:    170409425181
LU WWN Device Id: 5 001b44 4a6cbdf07
Firmware Version: X4120006
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      < 1.8 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 12 13:13:38 2022 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 32
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       69
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   ---    Old_age   Always       -       5433
 12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       5149
171 Program_Fail_Count      0x0032   100   100   ---    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   ---    Old_age   Always       -       0
173 Avg_Write/Erase_Count   0x0032   094   094   005    Old_age   Always       -       42
174 Unexpect_Power_Loss_Ct  0x0032   100   100   ---    Old_age   Always       -       66
176 Erase_Fail_Count_Chip   0x0022   100   100   ---    Old_age   Always       -       1088
181 Program_Fail_Cnt_Total  0x0022   100   100   ---    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0032   100   100   ---    Old_age   Always       -       3
184 End-to-End_Error        0x003b   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       39
194 Temperature_Celsius     0x0022   013   062   ---    Old_age   Always       -       13 (Min/Max 9/62)
198 Offline_Uncorrectable   0x0030   100   100   ---    Old_age   Offline      -       0
199 SATA_CRC_Error          0x0032   100   100   ---    Old_age   Always       -       0
201 Lifetime_Remaining%     0x0023   094   094   005    Pre-fail  Always       -       25769803818
230 Perc_Write/Erase_Count  0x0032   100   100   ---    Old_age   Always       -       2124 2124 1536
241 Total_Writes_GiB        0x0032   100   100   ---    Old_age   Always       -       572633
242 Total_Reads_GiB         0x0032   100   100   ---    Old_age   Always       -       967754
243 Unknown_Marvell_Attr    0x0032   100   100   ---    Old_age   Always       -       1067704
244 Thermal_Throttle        0x0032   000   100   ---    Old_age   Always       -       0
249 TLC_NAND_GB_Writes      0x0032   100   100   ---    Old_age   Always       -       4973

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5420         -
# 2  Short offline       Completed without error       00%      5396         -
# 3  Short offline       Completed without error       00%      5372         -
# 4  Short offline       Completed without error       00%      5367         -
# 5  Short offline       Completed without error       00%      5348         -
# 6  Short offline       Completed without error       00%      5324         -
# 7  Short offline       Completed without error       00%      5300         -
# 8  Short offline       Completed without error       00%      5276         -
# 9  Short offline       Completed without error       00%      5252         -
#10  Short offline       Completed without error       00%      5228         -
#11  Short offline       Completed without error       00%      5204         -
#12  Short offline       Completed without error       00%      5180         -
#13  Short offline       Completed without error       00%      5156         -
#14  Short offline       Completed without error       00%      5132         -
#15  Short offline       Completed without error       00%      5108         -
#16  Short offline       Completed without error       00%      5084         -
#17  Short offline       Completed without error       00%      5060         -
#18  Short offline       Completed without error       00%      5036         -
#19  Short offline       Completed without error       00%      5012         -
#20  Short offline       Completed without error       00%      4988         -
#21  Short offline       Completed without error       00%      4964         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

debug finished in 1 seconds for smartctl output


