Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-STABLE #0 r295946+07c41cd(9.10-STABLE): Wed Nov  9 00:19:25 UTC 2016
    root@gauntlet:/freenas-9.10-releng/_BE/objs/freenas-9.10-releng/_BE/os/sys/FreeNAS.amd64 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
KLD file vmxnet3.ko is missing dependencies
module_register: cannot register pci/xhci from kernel; already loaded from xhci.ko
Module pci/xhci failed to register: 17
CPU: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (2100.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406f1  Family=0x6  Model=0x4f  Stepping=1
  Features=0x1fa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,HTT>
  Features2=0xfffa3203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x1c2f3a<TSCADJ,BMI1,HLE,AVX2,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP>
  XSAVE Features=0x1<XSAVEOPT>
  TSC: P-state invariant
Hypervisor: Origin = "VMwareVMware"
real memory  = 18253611008 (17408 MB)
avail memory = 16570449920 (15802 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
random: <Software, Yarrow> initialized
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL 440BX> on motherboard
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 950
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1060-0x106f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1070-0x107f mem 0xe8000000-0xefffffff,0xfe000000-0xfe7fffff irq 16 at device 15.0 on pci0
vgapci0: Boot video device
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 17 at device 16.0 on pci0
mpt0: MPI Version=1.2.0.0
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x2000-0x201f irq 18 at device 0.0 on pci2
usbus0 on uhci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfd5ff000-0xfd5fffff irq 16 at device 2.0 on pci2
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps0: <Avago Technologies (LSI) SAS2008> port 0x4000-0x40ff mem 0xfd4fc000-0xfd4fffff,0xfd480000-0xfd4bffff irq 18 at device 0.0 on pci3
mps0: Firmware: 20.00.04.00, Driver: 21.00.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vmx0: <VMware VMXNET3 Ethernet Adapter> port 0x5000-0x500f mem 0xfd3fc000-0xfd3fcfff,0xfd3fd000-0xfd3fdfff,0xfd3fe000-0xfd3fffff irq 19 at device 0.0 on pci11
vmx0: Ethernet address: 00:0c:29:57:bd:e2
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pci13: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pci14: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
pci15: <ACPI PCI bus> on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
pci16: <ACPI PCI bus> on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
pci17: <ACPI PCI bus> on pcib17
pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
pci18: <ACPI PCI bus> on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci19: <ACPI PCI bus> on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
pci20: <ACPI PCI bus> on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
pci21: <ACPI PCI bus> on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
pci22: <ACPI PCI bus> on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
pci23: <ACPI PCI bus> on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
pci24: <ACPI PCI bus> on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
pci25: <ACPI PCI bus> on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
pci26: <ACPI PCI bus> on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci27: <ACPI PCI bus> on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
pci28: <ACPI PCI bus> on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
pci29: <ACPI PCI bus> on pcib29
pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
pci30: <ACPI PCI bus> on pcib30
pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
pci31: <ACPI PCI bus> on pcib31
pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
pci32: <ACPI PCI bus> on pcib32
pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
pci33: <ACPI PCI bus> on pcib33
pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
pci34: <ACPI PCI bus> on pcib34
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Tj(target) value 0 does not seem right.
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Tj(target) value 0 does not seem right.
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Tj(target) value 0 does not seem right.
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Tj(target) value 0 does not seem right.
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp4: Tj(target) value 0 does not seem right.
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp5: Tj(target) value 0 does not seem right.
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp6: Tj(target) value 0 does not seem right.
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp7: Tj(target) value 0 does not seem right.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x15ad> at usbus0
uhub0: <0x15ad UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <0x15ad> at usbus1
uhub1: <0x15ad EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <VMware> at usbus0
mps0: SAS Address for SATA device = 3e1f1461ad8f586a
mps0: SAS Address from SATA device = 3e1f1461ad8f586a
mps0: SAS Address for SATA device = 3e1f1461ad8a5856
mps0: SAS Address from SATA device = 3e1f1461ad8a5856
mps0: SAS Address for SATA device = 3e1f1461ad8f446b
mps0: SAS Address from SATA device = 3e1f1461ad8f446b
mps0: SAS Address for SATA device = 3e1f1461af666554
mps0: SAS Address from SATA device = 3e1f1461af666554
mps0: SAS Address for SATA device = 3e1f1461ad8c425e
mps0: SAS Address from SATA device = 3e1f1461ad8c425e
mps0: SAS Address for SATA device = 3e1f1461ad8e6c59
mps0: SAS Address from SATA device = 3e1f1461ad8e6c59
ugen0.3: <vendor 0x0e0f> at usbus0
uhub2: <VMware Virtual USB Hub> on usbus0
uhub1: 6 ports with 6 removable, self powered
uhub2: 7 ports with 7 removable, self powered
da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI device
da0: 10240MB (20971520 512 byte sectors)
da0: quirks=0x40<RETRY_BUSY>
cd0: Serial Number 10000000000000000001
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x40<RETRY_BUSY>
da1 at mps0 bus 0 scbus3 target 12 lun 0
da1: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number             ZA20HY2Y
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 9537536MB (19532873728 512 byte sectors)
da3 at mps0 bus 0 scbus3 target 14 lun 0
da3: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number             ZA20HV0L
da3: 600.000MB/s transfers
da4 at mps0 bus 0 scbus3 target 15 lun 0
da4: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number             ZA20HXZG
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 9537536MB (19532873728 512 byte sectors)
da2 at mps0 bus 0 scbus3 target 13 lun 0
da2: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number             ZA20J0SB
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 9537536MB (19532873728 512 byte sectors)
da6 at mps0 bus 0 scbus3 target 17 lun 0
da6: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number             ZA20HYFX
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 9537536MB (19532873728 512 byte sectors)
da3: Command Queueing enabled
da3: 9537536MB (19532873728 512 byte sectors)
da5 at mps0 bus 0 scbus3 target 16 lun 0
da5: <ATA ST10000VN0004-1Z SC60> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number             ZA20HTFD
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 9537536MB (19532873728 512 byte sectors)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
Trying to mount root from zfs:freenas-boot/ROOT/9.10.1-U4 []...
<118>Loading early kernel modules:
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
<118>Setting hostuuid: 564da3f9-c0a8-f00d-457c-32e5bf57bde2.
<118>Setting hostid: 0xf5a77204.
<118>No suitable dump device was found.
<118>Entropy harvesting: interrupts ethernet point_to_point swi.
<118>Starting file system checks:
<118>Mounting local file systems:.
<118>kern.ipc.maxsockbuf: 2097152 -> 2097152
<118>net.inet.tcp.delayed_ack: 1 -> 0
<118>net.inet.tcp.recvbuf_max: 2097152 -> 16777216
<118>net.inet.tcp.sendbuf_max: 2097152 -> 16777216
<118>vfs.zfs.l2arc_headroom: 2 -> 2
<118>vfs.zfs.l2arc_noprefetch: 1 -> 0
<118>vfs.zfs.l2arc_norw: 1 -> 0
<118>vfs.zfs.l2arc_write_boost: 8388608 -> 40000000
<118>vfs.zfs.l2arc_write_max: 8388608 -> 10000000
<118>net.inet.tcp.recvbuf_inc: 16384 -> 524288
<118>vfs.zfs.metaslab.lba_weighting_enabled: 1 -> 1
<118>vfs.zfs.zfetch.max_distance: 8388608 -> 33554432
<118>kern.ipc.nmbclusters: 1046714 -> 2097152
<118>net.inet.tcp.sendspace: 32768 -> 131072
<118>net.inet.tcp.mssdflt: 536 -> 1448
<118>net.inet.tcp.recvspace: 65536 -> 131072
<118>net.inet.tcp.sendbuf_inc: 8192 -> 16384
<118>Beginning ZFS volume imports
<118>
<118>
<118>ZFS volume imports complete
<118>Loading kernel modules:
pmc: Unknown Intel CPU.
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
<118>Writing entropy file:.
<118>Setting hostname: MSZone.NAS.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat /usr/local/lib/gcc48 /usr/local/lib/nss
<118>32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat
<118>Loading vmmemctl kernel module: 
VMware memory control driver initialized
<118>done.
<118>Loading vmblock kernel module: done.
<118>Loading vmhgfs kernel module: done.
<5>vmx0: link state changed to UP
<118>Starting Network: lo0 vmx0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=60039b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,TSO6,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	ether 00:0c:29:57:bd:e2
<118>	inet 192.168.77.207 netmask 0xffffff00 broadcast 192.168.77.255 
<118>	inet6 fe80::20c:29ff:fe57:bde2%vmx0 prefixlen 64 scopeid 0x1 
<118>	nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: active
<118>Starting devd.
uhid0: <VMware> on usbus0
uhid1: <VMware> on usbus0
<118>add net default: gateway 192.168.77.1
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Starting rtsold.
<118>Generating host.conf.
<118>Warning: unrecognized source [mdns]
vboxdrv: fAsync=0 offMin=0x467 offMax=0x1cc16
<118>Starting syslog_ng.
<118>Creating and/or trimming log files.
<118>Starting rpcbind.
<118>Starting watchdogd.
<118>watchdogd: watchdog_patpat failed: Operation not supported
<118>watchdogd: patting the dog: Operation not supported
<118>/etc/rc: WARNING: failed to start watchdogd
GEOM_ELI: Device da1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device da2p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device da3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device da4p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device da5p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device da6p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
<118>Setting up system for textdumps.
<118>debug.ddb.textdump.pending: 0 -> 1
<118>debug.debugger_on_panic: 1 -> 1
<118>No core dumps found.
<118>Starting ctld.
<118>ctld: LUN creation warning: error opening /dev/zvol/MSZone-RAID/ESXiStorage: 2
<118>Alarm clock
<118>Starting mountd.
<118>NFSv4 is disabled
<118>Starting nfsd.
nfsd: can't register svc name
<118>Starting statd.
<118>Starting lockd.
<118>Updating motd:.
<118>Mounting late file systems:.
<118>Starting ntpd.
<118>Can't load /usr/local/etc/smb4.conf - run testparm to debug it
<118>Unable to open /var/db/samba4/private/secrets.tdb: [Errno 2] No such file or directory
<118>Dec 11 15:15:12 MSZone generate_smb4_conf.py: [generate_smb4_conf:1498] Unable to open /var/db/samba4/private/secrets.tdb: [Errno 2] No such file or directory
<118>Importing account for root...ok
<118>Enabled user root.
<118>Granted SeTakeOwnershipPrivilege to MSZONE-NAS\root
<118>Granted SeBackupPrivilege to MSZONE-NAS\root
<118>Granted SeRestorePrivilege to MSZONE-NAS\root
<118>Performing sanity check on Samba configuration: OK
<118>Starting nmbd.
<118>Starting smbd.
<118>Starting winbindd.
<118>Starting vmware_guestd.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting smartd.
<118>Starting pbid...
<118>WARNING: can't open config file: /usr/local/openssl/openssl.cnf
<118>Performing sanity check on nginx configuration:
<118>nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
<118>nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
<118>Starting nginx.
<118>Starting mdnsd.
<118>Starting dbus.
<118>Starting collectd.
<118>Flushed all rules.
<118>Starting zfsd.
<118>Configuring syscons: keymap blanktime.
<118>Starting cron.
<118>
<118>Sun Dec 11 15:15:29 CET 2016
<6>pid 1318 (syslog-ng), uid 0: exited on signal 6 (core dumped)
<118>Dec 11 15:16:19 MSZone autosnap.py: [tools.autosnap:506] Failed to create snapshot 'MSZone-RAID@auto-20161211.1516-1w': cannot open 'MSZone-RAID': dataset does not exist
<118>usage:
<118>	snapshot|snap [-r] [-o property=value] ... <filesystem|volume>@<snap> ...
<118>
<118>For the property list, run: zfs set|get
<118>
<118>For the delegated permission list, run: zfs allow|unallow
GEOM_ELI: Device gptid/8fe51f02-bafd-11e6-a3e0-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device gptid/94f10da2-bbce-11e6-9ec4-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device gptid/ea5ef253-bcc1-11e6-bd79-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device gptid/e7ab538e-bd77-11e6-a81b-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
GEOM_ELI: Device gptid/b58d0fd5-be7a-11e6-a080-000c2957bde2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: hardware
nfsd: can't register svc name
bridge0: Ethernet address: 02:f5:a7:72:04:00
<5>bridge0: link state changed to UP
<6>vmx0: promiscuous mode enabled
epair0a: Ethernet address: 02:ff:20:00:04:0a
epair0b: Ethernet address: 02:ff:70:00:05:0b
<5>epair0a: link state changed to UP
<5>epair0b: link state changed to UP
<6>epair0a: promiscuous mode enabled
<4>ng_ether_ifnet_arrival_event: can't re-name node epair0b
<118>Dec 11 15:16:59 MSZone kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
epair1a: Ethernet address: 02:ff:20:00:05:0a
epair1b: Ethernet address: 02:ff:70:00:06:0b
<5>epair1a: link state changed to UP
<5>epair1b: link state changed to UP
<6>epair1a: promiscuous mode enabled
<4>ng_ether_ifnet_arrival_event: can't re-name node epair1b
<118>Dec 11 15:17:08 MSZone kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
<6>arp: 192.168.77.207 moved from 02:ff:20:00:04:0a to 00:0c:29:57:bd:e2 on epair0b
	(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 461 command timeout cm 0xfffffe0000afcd10 ccb 0xfffff803bf56d800
	(noperiph:mps0:0:4294967295:0): SMID 1 Aborting command 0xfffffe0000afcd10
mps0: Sending reset from mpssas_send_abort for target ID 16
	(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 1a 8c 6e 28 00 00 00 08 00 00 length 4096 SMID 347 terminated ioc 804b scsi 0 state c xfer 0
	(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 b2 ec 78 f0 00 00 00 08 00 00 length 4096 SMID 862 terminated ioc 804b sc(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 1a 8c 6e 28 00 00 00 08 00 00 
si 0 state c xfer 0
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
	(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 b2 f3 a5 e0 00 00 00 08 00 00 length 4096 SMID 70 terminated ioc 804b scs(da5:i 0 state c xfer 0
mps0:0:	(da5:mps0:0:16:0): WRITE(16). CDB: 8a 00 00 00 00 02 87 55 6e e8 00 00 00 08 00 00 length 4096 SMID 767 terminated ioc 804b s16:csi 0 state c xfer 0
0): mps0: Retrying command
Unfreezing devq for target ID 16
(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 b2 ec 78 f0 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 b2 f3 a5 e0 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): WRITE(16). CDB: 8a 00 00 00 00 02 87 55 6e e8 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 
(da5:mps0:0:16:0): CAM status: Command timeout
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): WRITE(16). CDB: 8a 00 00 00 00 02 87 55 6e e8 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: SCSI Status Error
(da5:mps0:0:16:0): SCSI status: Check Condition
(da5:mps0:0:16:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da5:mps0:0:16:0): Retrying command (per sense data)
(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 
(da5:mps0:0:16:0): CAM status: SCSI Status Error
(da5:mps0:0:16:0): SCSI status: Check Condition
(da5:mps0:0:16:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da5:mps0:0:16:0): Retrying command (per sense data)
	(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 432 command timeout cm 0xfffffe0000afa700 ccb 0xfffff8036ff7d000
	(noperiph:mps0:0:4294967295:0): SMID 2 Aborting command 0xfffffe0000afa700
mps0: Sending reset from mpssas_send_abort for target ID 16
	(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 842 command timeout cm 0xfffffe0000b1c120 ccb 0xfffff802d5076000
	(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 ce a7 16 c0 00 00 00 10 00 00 length 8192 SMID 648 terminated ioc 804b scsi 0 state c xfer 0
	(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 cf bb 1a 10 00 00 00 08 00 00 length 4096 SMID 959 terminated ioc 804b sc(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 ce a7 16 c0 00 00 00 10 00 00 
si 0 state c xfer 0
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
	(da5:mps0:0:16:0): WRITE(16). CDB: 8a 00 00 00 00 01 cf ca 38 c8 00 00 00 08 00 00 length 4096 SMID 500 terminated ioc 804b s(da5:csi 0 state c xfer 0
mps0:0:	(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 842 terminated ioc 804b scsi 0 sta16:te c xfer 0
0): mps0: Retrying command
Unfreezing devq for target ID 16
(da5:mps0:0:16:0): READ(16). CDB: 88 00 00 00 00 01 cf bb 1a 10 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): WRITE(16). CDB: 8a 00 00 00 00 01 cf ca 38 c8 00 00 00 08 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 
(da5:mps0:0:16:0): CAM status: Command timeout
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 
(da5:mps0:0:16:0): CAM status: CCB request completed with an error
(da5:mps0:0:16:0): Retrying command
(da5:mps0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 
(da5:mps0:0:16:0): CAM status: SCSI Status Error
(da5:mps0:0:16:0): SCSI status: Check Condition
(da5:mps0:0:16:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da5:mps0:0:16:0): Error 6, Retries exhausted
(da5:mps0:0:16:0): Invalidating pack
GEOM_ELI: g_eli_write_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[WRITE(offset=3981778456576, length=4096)]
GEOM_ELI: g_eli_write_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[WRITE(offset=3981778460672, length=8192)]
GEOM_ELI: g_eli_write_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[WRITE(offset=3981778317312, length=131072)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
GEOM_ELI: g_eli_write_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[WRITE(offset=3981777580032, length=8192)]
<118>Dec 19 03:03:20 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:03:21 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:18:20 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:18:28 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:18:35 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:18:52 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:19:11 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:19:15 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=270336, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683086848, length=8192)]
GEOM_ELI: g_eli_read_done() failed (error=6) gptid/44ed74f6-bdf2-11e6-9e80-000c2957bde2.eli[READ(offset=9998683348992, length=8192)]
<118>Dec 19 03:21:41 MSZone zfsd: CaseFile::Serialize: Unable to open /etc/zfs/cases/pool_9748705956247124262_vdev_3711813358483936.case.
<118>Dec 19 03:24:10 MSZone shutdown: power-down by root: 
<118>Stopping cron.
<118>Waiting for PIDS: 3868.
GEOM_ELI: Device da2p1.eli destroyed.
GEOM_ELI: Detached da2p1.eli on last close.
GEOM_ELI: Device da3p1.eli destroyed.
GEOM_ELI: Detached da3p1.eli on last close.
GEOM_ELI: Device da4p1.eli destroyed.
GEOM_ELI: Detached da4p1.eli on last close.
GEOM_ELI: Device da1p1.eli destroyed.
GEOM_ELI: Detached da1p1.eli on last close.
GEOM_ELI: Device da6p1.eli destroyed.
GEOM_ELI: Detached da6p1.eli on last close.
GEOM_ELI: g_eli_read_done() failed (error=6) da5p1.eli[READ(offset=249856, length=4096)]
swap_pager: I/O error - pagein failed; blkno 2097217,size 4096, error 6
panic: swap_pager_force_pagein: read from swap failed
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe05850456a0
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe0585045750
vpanic() at vpanic+0x126/frame 0xfffffe0585045790
panic() at panic+0x43/frame 0xfffffe05850457f0
swapoff_one() at swapoff_one+0x693/frame 0xfffffe0585045870
sys_swapoff() at sys_swapoff+0x1bf/frame 0xfffffe0585045990
amd64_syscall() at amd64_syscall+0x40f/frame 0xfffffe0585045ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0585045ab0
--- syscall (424, FreeBSD ELF64, sys_swapoff), rip = 0x800a7b29a, rsp = 0x7fffffffe5f8, rbp = 0x7fffffffe620 ---
KDB: enter: panic
