+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SATADOM-SL 3ME
Serial Number:    20150523AA1052110868
Firmware Version: S140714
User Capacity:    32,017,047,552 bytes [32.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Mar  9 19:47:25 2016 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Read SCT Status failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(   32) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging NOT supported.
					General Purpose Logging supported.
SCT capabilities: 	       (0x0039)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     ------   000   000   000    -    0
  2 Throughput_Performance  ------   000   000   000    -    0
  3 Spin_Up_Time            ------   000   000   000    -    0
  5 Reallocated_Sector_Ct   -O----   100   100   000    -    0
  7 Unknown_SSD_Attribute   ------   000   000   000    -    0
  8 Unknown_SSD_Attribute   ------   000   000   000    -    0
  9 Power_On_Hours          -O----   100   100   000    -    369
 10 Unknown_SSD_Attribute   ------   000   000   000    -    0
 12 Power_Cycle_Count       -O----   100   100   000    -    10
168 Unknown_Attribute       ------   000   000   000    -    0
169 Unknown_Attribute       ------   000   000   000    -    0
175 Program_Fail_Count_Chip ------   000   000   000    -    0
192 Power-Off_Retract_Count ------   000   000   000    -    0
  1 Raw_Read_Error_Rate     ------   000   000   000    -    2199023255552
197 Current_Pending_Sector  ------   000   000   000    -    0
240 Unknown_SSD_Attribute   ------   000   000   000    -    0
225 Unknown_SSD_Attribute   ------   000   000   000    -    0
170 Unknown_Attribute       PO----   100   100   ---    -    2818048
173 Unknown_Attribute       -O----   100   100   ---    -    589826
229 Unknown_Attribute       -O----   100   100   ---    -    88487392262808
236 Unknown_Attribute       -O----   100   100   ---    -    0
235 Unknown_Attribute       -O----   100   000   ---    -    0
176 Erase_Fail_Count_Chip   ------   100   000   ---    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

Read SMART Log Directory failed: Input/output error

General Purpose Log Directory Version 1
Address    Access  R/W   Size  Description
0x00       GPL     R/O      1  Log Directory
0x03       GPL     R/O     64  Ext. Comprehensive SMART error log
0x07       GPL     R/O      1  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x80-0x9f  GPL     R/W     16  Host vendor specific log
0xe0       GPL     R/W      1  SCT Command/Status
0xe1       GPL     R/W      1  SCT Data Transfer

ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Comprehensive Error Log failed

SMART Error Log not supported

ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: Input/output error
Read SMART Extended Self-test Log failed

SMART Self-test Log not supported

Selective Self-tests/Logging not supported

Read SCT Status failed: Input/output error

Read SCT Status failed: Input/output error
SCT (Get) Error Recovery Control command failed

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            7  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  4            0  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4            4  Device-to-host register FISes sent due to a COMRESET
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC

/dev/da8
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0731fdcbc
Serial number:        PEGKJ6RX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:25 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     37 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  36
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  166
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1130928055255040

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1269        1         0      1270      13865       3183.195           0
write:         0        0         0         0       7506       5418.008           0
verify:        0        0         0         0        491          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3497:57 [209877 minutes]
    Number of background scans performed: 22,  scan progress: 2.39%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca0731fdcbd
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 20
    Invalid DWORD count = 10
    Running disparity error count = 10
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 10
     Running disparity error count: 10
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca0731fdcbe
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da7
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0731e8b04
Serial number:        PEGJTRHX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:25 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     37 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1189506627665920

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:        547        0         0       547      14338       3400.302           0
write:         0        0         0         0      11869       5268.962           0
verify:        0        0         0         0        291          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:02 [206702 minutes]
    Number of background scans performed: 22,  scan progress: 2.37%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca0731e8b05
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 19
    Invalid DWORD count = 9
    Running disparity error count = 9
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 9
     Running disparity error count: 9
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca0731e8b06
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da6
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca073205bec
Serial number:        PEGKTP9X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:25 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1190641790877696

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:        639        0         0       639      14914       3400.219           0
write:         0        0         0         0       7679       5269.474           0
verify:        0        0         0         0        152          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:19 [206719 minutes]
    Number of background scans performed: 22,  scan progress: 2.35%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca073205bed
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 18
    Invalid DWORD count = 8
    Running disparity error count = 8
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 8
     Running disparity error count: 8
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca073205bee
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da5
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca07320532c
Serial number:        PEGKT37X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:25 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1189459181699072

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:        274        0         0       274      14754       3391.980           0
write:         0        0         0         0      12436       5268.810           0
verify:        0        0         0         0        190          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:06 [206706 minutes]
    Number of background scans performed: 22,  scan progress: 2.34%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca07320532d
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 17
    Invalid DWORD count = 9
    Running disparity error count = 9
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 9
     Running disparity error count: 9
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca07320532e
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da4
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca05cd0eb54
Serial number:        PCKPWV6X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:26 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     41 C
Drive Trip Temperature:        85 C

Manufactured in week 10 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1190760657453056

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       3658        0         0      3658      14275       3171.439           0
write:         0        0         0         0       6075       5269.641           0
verify:        0        0         0         0      22332          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:25 [206725 minutes]
    Number of background scans performed: 22,  scan progress: 2.26%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca05cd0eb55
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 16
    Invalid DWORD count = 11
    Running disparity error count = 11
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 11
     Running disparity error count: 11
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca05cd0eb56
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0731e80a4
Serial number:        PEGJT12X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:26 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     39 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1189738002251776

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:        698        0         0       698      14279       3185.880           0
write:         0        0         0         0       7868       5269.271           0
verify:        0        0         0         0        268          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:46 [206746 minutes]
    Number of background scans performed: 22,  scan progress: 2.32%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca0731e80a5
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 15
    Invalid DWORD count = 10
    Running disparity error count = 10
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 10
     Running disparity error count: 10
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca0731e80a6
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0731fce78
Serial number:        PEGKH88X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:26 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     41 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1189644486049792

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1477        0         0      1477      14741       3200.039           0
write:         0        0         0         0       9458       5269.023           0
verify:        0        0         0         0        590          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:11 [206711 minutes]
    Number of background scans performed: 22,  scan progress: 2.33%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca0731fce79
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 14
    Invalid DWORD count = 8
    Running disparity error count = 8
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 8
     Running disparity error count: 8
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca0731fce7a
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca073204688
Serial number:        PEGKS84X
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:26 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     42 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  36
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  178
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1964087823040512

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1177        0         0      1177      13512       3226.524           0
write:         0        0         0         0      10668       9372.959           0
verify:        0        0         0         0        506          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3498:40 [209920 minutes]
    Number of background scans performed: 22,  scan progress: 2.37%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca073204689
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 13
    Invalid DWORD count = 11
    Running disparity error count = 11
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 11
     Running disparity error count: 11
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca07320468a
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p31 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HGST
Product:              HUS724040ALS640
Revision:             A280
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca0732068d8
Serial number:        PEGKUJZX
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Wed Mar  9 19:47:26 2016 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     41 C
Drive Trip Temperature:        85 C

Manufactured in week 20 of year 2015
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  22
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  164
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 1189872203202560

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1053        8         0      1061      15016       3397.082           0
write:         0        0         0         0       9844       5269.144           0
verify:        0        0         0         0       4323          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 3445:28 [206728 minutes]
    Number of background scans performed: 22,  scan progress: 2.30%
    Number of background medium scans performed: 22

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 1
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca0732068d9
    attached SAS address = 0x5003048001cddb3f
    attached phy identifier = 12
    Invalid DWORD count = 9
    Running disparity error count = 9
    Loss of DWORD synchronization = 2
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 9
     Running disparity error count: 9
     Loss of dword synchronization count: 2
     Phy reset problem count: 0
relative target port id = 2
  generation code = 1
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: power on
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x5000cca0732068da
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0



