smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-XXX LU WWN Device Id: 5 0014ee 6b0484bb1 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 21 14:57:24 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 405) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 184 180 021 - 5791 4 Start_Stop_Count -O--CK 100 100 000 - 67 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 10078 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 67 192 Power-Off_Retract_Count -O--CK 200 200 000 - 65 193 Load_Cycle_Count -O--CK 200 200 000 - 648 194 Temperature_Celsius -O---K 121 104 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9506 - # 2 Short offline Completed without error 00% 9443 - # 3 Short offline Completed without error 00% 9396 - # 4 Extended offline Completed without error 00% 9355 - # 5 Short offline Completed without error 00% 9324 - # 6 Short offline Completed without error 00% 9276 - # 7 Short offline Completed without error 00% 9228 - # 8 Short offline Completed without error 00% 9195 - # 9 Extended offline Completed without error 00% 9132 - #10 Short offline Completed without error 00% 9101 - #11 Short offline Completed without error 00% 9052 - #12 Short offline Completed without error 00% 9004 - #13 Extended offline Completed without error 00% 8963 - #14 Short offline Completed without error 00% 8932 - #15 Short offline Completed without error 00% 8884 - #16 Short offline Completed without error 00% 8836 - #17 Extended offline Completed without error 00% 8795 - #18 Short offline Completed without error 00% 8764 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 25/29 Celsius Lifetime Min/Max Temperature: 2/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (32) Index Estimated Time Temperature Celsius 33 2020-04-21 07:00 36 ***************** ... ..( 91 skipped). .. ***************** 125 2020-04-21 08:32 36 ***************** 126 2020-04-21 08:33 ? - 127 2020-04-21 08:34 22 *** 128 2020-04-21 08:35 22 *** 129 2020-04-21 08:36 23 **** 130 2020-04-21 08:37 23 **** 131 2020-04-21 08:38 24 ***** ... ..( 8 skipped). .. ***** 140 2020-04-21 08:47 24 ***** 141 2020-04-21 08:48 25 ****** ... ..( 4 skipped). .. ****** 146 2020-04-21 08:53 25 ****** 147 2020-04-21 08:54 26 ******* ... ..( 2 skipped). .. ******* 150 2020-04-21 08:57 26 ******* 151 2020-04-21 08:58 27 ******** ... ..( 11 skipped). .. ******** 163 2020-04-21 09:10 27 ******** 164 2020-04-21 09:11 28 ********* ... ..( 9 skipped). .. ********* 174 2020-04-21 09:21 28 ********* 175 2020-04-21 09:22 ? - 176 2020-04-21 09:23 23 **** 177 2020-04-21 09:24 23 **** 178 2020-04-21 09:25 24 ***** ... ..( 2 skipped). .. ***** 181 2020-04-21 09:28 24 ***** 182 2020-04-21 09:29 25 ****** 183 2020-04-21 09:30 25 ****** 184 2020-04-21 09:31 26 ******* 185 2020-04-21 09:32 26 ******* 186 2020-04-21 09:33 ? - 187 2020-04-21 09:34 24 ***** ... ..( 2 skipped). .. ***** 190 2020-04-21 09:37 24 ***** 191 2020-04-21 09:38 25 ****** 192 2020-04-21 09:39 25 ****** 193 2020-04-21 09:40 26 ******* ... ..( 2 skipped). .. ******* 196 2020-04-21 09:43 26 ******* 197 2020-04-21 09:44 27 ******** ... ..( 7 skipped). .. ******** 205 2020-04-21 09:52 27 ******** 206 2020-04-21 09:53 28 ********* ... ..( 19 skipped). .. ********* 226 2020-04-21 10:13 28 ********* 227 2020-04-21 10:14 29 ********** ... ..( 19 skipped). .. ********** 247 2020-04-21 10:34 29 ********** 248 2020-04-21 10:35 30 *********** ... ..(118 skipped). .. *********** 367 2020-04-21 12:34 30 *********** 368 2020-04-21 12:35 ? - 369 2020-04-21 12:36 30 *********** ... ..( 4 skipped). .. *********** 374 2020-04-21 12:41 30 *********** 375 2020-04-21 12:42 ? - 376 2020-04-21 12:43 31 ************ 377 2020-04-21 12:44 ? - 378 2020-04-21 12:45 29 ********** ... ..( 4 skipped). .. ********** 383 2020-04-21 12:50 29 ********** 384 2020-04-21 12:51 30 *********** ... ..( 2 skipped). .. *********** 387 2020-04-21 12:54 30 *********** 388 2020-04-21 12:55 ? - 389 2020-04-21 12:56 31 ************ ... ..( 59 skipped). .. ************ 449 2020-04-21 13:56 31 ************ 450 2020-04-21 13:57 32 ************* ... ..( 3 skipped). .. ************* 454 2020-04-21 14:01 32 ************* 455 2020-04-21 14:02 ? - 456 2020-04-21 14:03 25 ****** ... ..( 3 skipped). .. ****** 460 2020-04-21 14:07 25 ****** 461 2020-04-21 14:08 26 ******* 462 2020-04-21 14:09 26 ******* 463 2020-04-21 14:10 26 ******* 464 2020-04-21 14:11 27 ******** ... ..( 9 skipped). .. ******** 474 2020-04-21 14:21 27 ******** 475 2020-04-21 14:22 28 ********* ... ..( 3 skipped). .. ********* 1 2020-04-21 14:26 28 ********* 2 2020-04-21 14:27 29 ********** 3 2020-04-21 14:28 29 ********** 4 2020-04-21 14:29 29 ********** 5 2020-04-21 14:30 36 ***************** ... ..( 26 skipped). .. ***************** 32 2020-04-21 14:57 36 ***************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1565 Vendor specific